Brighter and Richer Colours Create an Even More Attractive Product.

Schurter is expanding its existing MSM CS and MSM CS LA series with stronger illumination colors.

The MSM CS and MSM LA CS series is available in the diameters of 19 mm and 22 mm. The switching function of the MSM CS series is momentary, while the switching function for the MSM LA CS is latching. The scratch resistant ceramics surface is also great for laser lettering. Now, SCHURTER expands the attractive MSM CS and MSM LA CS series with three more bright illumination options: Rich green, red, blue and bright white.

This new illumination options offers a more prominent illumination in customer applications. The standard illumination voltage is 24 VDC as usual. Other voltages are available on request, on a customer specific base.

Technical Data / Approvals
- Brighter and richer colors, available for blue, red, green and white
- Available in the diameters 19 mm and 22 mm
- Available as momentary and latching switch
- Illumination voltage is 24 VDC
- Switching current MSM CS: 0.1A and 10A
- Switching current MSM LA CS: 12A

Application
- Medical equipment
- Industrial applications
- Design sensitive applications

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Honeywell’s Low Temperature Passive Probes, LTP Series, are a modular range of temperature sensors designed for potential use in transportation applications. The LTP Series feature a durable, closed-tip design that maximizes reliability in harsh applications. The sensor’s thermistor sensing element effectively senses gases, liquids or solids because of its enhanced sensitivity, accuracy and reliability. Easy-to-install threaded mounting provides reliable operation in harsh environments. Numerous options from mechanical and electrical interface simplify installation, allow customers to meet their specific application needs, and facilitate backwards compatibility with most existing applications.

Value to Customers
The LTP Series are designed to meet the customer’s need for sensors that are configurable, backwards-compatible, durable, and that reduce total cost of ownership. Their flexible design provides over 2,200 standard configurations with an enhanced response time over a wide operating temperature range.

Features
*  Temperature range: -40 °C to 150 °C [-40 °F to 302 °F]
*  Response time [T63.2% of 25 °C to 85 °C step]: stirred silicon oil <15 s; stirred water <15 s; air flow 10 m/s <20 s
*  Accuracy:
-40 °C to 25 °C [-40 °F to 77 °F]: ±2.5 °C
25 °C to 100 °C [77 °F to 212 °F]: ±0.8 °C
100 °C to 125 °C [212 °F to 257 °F]: ±2.0 °C
125 °C to 150 °C [257 °F to 302 °F]: ±3.5 °C
*  Electrical interface: Electrical interface: Bosch Kompakt, Delphi Metri-Pack 150 Series, AMP Seal 16, AMP Minitimer, AMP Superseal, and Deutsch DT04-2P
*  Probe length options: 20 mm to 50 mm (other lengths available on request)
*  Mechanical fastening options: M10 to M18, 3/4 UNF, and G 1/4 (other threads available on request)
*  Retainer ring with hex: provides complete location for socket wrench in axial and radial directions, enabling the operator to first locate the sensor inside the socket freely and more easily install the sensor
*  Insulation resistance between I/O pin and the sensor’s housing: >10 MOhm at 250 Vdc, 25 °C [77 °C]
*  Ingress protection: IP67
*  Vibration: 30 G sine wave,10 Hz to 2000 Hz
*  Mechanical shock: 50 G
*  Service pressure: 10 bar
*  Burst pressure: 40 bar
*  Wire harness (with or without a connector) or other sensing elements (PTC or RTD) available upon request
*  Standard configurations listed, customization available upon request.

Potential Transportation Applications
*  Ambient air temperature sensor
*  Automatic transmission system
*  Engine air inlet system
*  Engine cooling system
*  Engine lubrication system
*  Fuel system
*  Haldex coupling system
*  Hydraulic pump systems

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter expands the SHT 6.3x32 range of high voltage fuses with the rated currents 20A, 25A and 32A. The high breaking capacity of 1500 A at nominal voltage allows for interesting possibilities in new applications and protects people and electronic systems from overcurrent and potential fire outbreaks in case of short circuits.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Nanocrystalline Common Mode Chokes for 1 and 3-Phase Applications Mount on PCB

Schurter expands its wide range of current compensated chokes with high current types for PCB mounting. The new DKIH series is now available with a nanocrystalline ring core, offering 8 times higher inductance performance than ferrite core versions in the same compact dimension. The new product is designed for single and three phase applications with rated currents from 10 to 50 amperes. Due to its open design, the chokes are light weight and compact, ideally designed to suppress EMI noise caused by power applications on the PCB.

Like all other aspects of electronic design, the power portion is oftentimes built today using discrete components on printed circuit boards. With the trending integration of components, to achieve smaller and smaller form factors, thermal problems and high currents on the PCB can become a challenge.
Traditional block filters might well address these challenges, but their larger package size also presents challenges due to the mentioned space constraints; therefore an asymmetrical effective common mode choke and capacitors mounted on the PCB is a better solution.

The new DKIH-1 series is suitable for single phase AC or DC applications from 10 up to 50 amperes. Light weight and compact, the common mode chokes are easily placed on the PCB with through hole technology (THT). They are designed and approved according IEC 60938, UL 1283 and CSA 22.2 no. 8. The voltage rating is 300 VAC (IEC, UL) and 250 VAC (CSA) with an inductance range of 1.6 to 6.9 mH.

The new DKIH-3 series is suitable for three phase AC applications from 10 up to 50 amperes. The common mode chokes are also designed according IEC 60938 and are rated 600 VAC with an inductance range of 0.7 to 10.8 mH, making them suitable for many applications such as UPS systems, switching power supplies, charge stations for electric vehicles and frequency converters for energy storage.

The DKIH-1 and -3 have a wide temperature range of -40 to +100 °C. They are available with a standard pin out or customer specific pin out. Variations in the winding are also available upon request.

DKIH-1
- Rated voltage: 300 VAC (UL, ENEC), 250 VAC (CSA), 425 VDC
- Rated currents: 10 to 50 A (ENEC / UL / CSA) at 40 °C
- Rated inductance: ferrite: 0.15 to 0.80 mH, nanocrystalline: 1.4 – 6.9 mH
- Same dimensions and weight for ferrite and nanocrystalline versions
- Other pin outs available on request

DKIH-3
- Rated voltage: 600 VAC
- Rated currents: 10 to 50 A at 40 °C
- Rated inductance: ferrite: 0.08 to 1.10 mH, nanocrystalline: 0.7 – 10.8 mH
- Same dimensions and weight for ferrite and nanocrystalline versions
- Other pin outs available on request

Application
- Frequency converters for photovoltaic or energy storage
- Charge stations for electric vehicles
- UPS-systems
- Switching power supplies

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter is expanding its successful single-phase filter family, FMAB NEO, with new design series P and Q. This range of single-phase filters combines high performance in a compact design. The new series extends the range of current ratings up to 60 A, with extended temperature range from -40°C to 100°C.

The new FMAB filter family offers 3 different levels of design flexibility. FMAB NEO design N comes with two large X capacitors, that offer high symmetrical attenuation in the lower frequency range. The new filter design P contains two standard X capacitors for high symmetrical attenuation, while Design Q offers one X capacitor for good symmetrical attenuation. With the extended temperature range from -40 to 100°C, all filters are suitable for applications used in harsh environments.

The FMAB NEO filters have a polished steel housing with a closed filter base. The filter is thus effectively and completely shielded, regardless of how it is mounted. The filter series is particularly suitable for equipment with high symmetrical interferences, such as devices with semiconductors that control high-power equipment, including professional coffee machines, devices with water heaters, and all types of industrial electronics. The compact filters are also suitable for medical equipment and household appliances.

The filter series is fitted with plug-in connections or threaded bolts. A version with wire connections is also available. The metal flange provides easy screw-on mounting.

The series of filters is designed for current levels from 1 A to 60 A at 250 V AC according to IEC and UL standards.The FMAB NEO has ENEC and cURus approvals and is suited for applications according to IEC 60950. Versions are available with small leakage currents <80 μA (M80) or without leakage current <5 μA (M5) for medical equipment according to IEC/UL 60601-1.

Technical Data / Approvals
- 250VAC single-phase block filter
- Single-stage filter with good or standard attenuation
- Filter available ins standard or medical M5 / M80 version
- Rated currents: 1, 3, 6, 10, 12, 16, 20, 30, 60A (ENEC / UL / CSA) at 40°C
- Operating Temperature: -40°C to 100°C
- Chassis: Screw-on mounting, from top
- Quick connect terminals 1 – 20A, nut and bolt 30, 60A, optional wire leads

Application
- for applications with low ambient temperatures
- Design P for applications with high symmetrical interferences
- Industrial applications
- Commercial kitchen equipment
- Datacom equipment
- Medical equipment

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/