The CW Series Panel Mount AC output Solid State Relays offer a back-to-back SCR output for reliable switching of commercial and heavy industrial loads. This type of high performing SSR is available with output ratings from 10 Amps up to 125 Amps at 24 to 660 VAC.

The CW Series panel mount solid state relay includes a removable IP20 touch-safe cover for added safety and is also available with zero voltage turn-on (for resistive loads) or instantaneous turn-on (for inductive loads) outputs.

Additional Features of the CW Series Panel Mount SSRs Include:
• DBC substrate for superior thermal performance:
• 3-32 VDC, 18-36 VAC, 90-280 VAC and universal AC/DC control input options
• LED input indicator
• EMC compliant to Level 3
• C-UL-US recognized, CE and RoHS compliant

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Series 1 is Sensata | Crydom signature family of Panel Mount AC output Solid State Relays with reliable back-to-back SCR output for heavy industrial loads. These SSRs are available with ratings from 10 Amps up to 125 Amps at 12 to 530 VAC.

Additional Features of the Series 1 Panel Mount SSRs Include:
• DBC substrate for superior thermal performance
• AC or DC control input
• Zero voltage (resistive loads) or instantaneous (inductive loads) turn-on output
• Optional LED input status indicator
• UL, CSA and TUV approved and CE compliant to EN 609050-1

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Plug-In Solid State Relays

Sensata | Crydom ED Series DC Output Plug-in Solid State Relays are designed to replace industry standard 12 x 29 mm plug-in Electromechanical Relays, offering substantial performance advantages over traditional EMR switching solutions in many applications.

Available in SPST N.O. configuration, the ED Series offer output ratings of 5 or 10 Amps at 1 to 100 VDC, and they are UL 508 recognized, IEC rated and CE compliant.

Features:
• DC output Solid State Relay in an Industry standard EMR plug in package
• Ratings of 5 & 10 Amps
• Load voltage range of 1-48, 1-80 and 1-100 VDC
• Fits standard DIN rail & PCB mountable sockets
• LED input status indicator
• AC or DC control
• cUL Recognized, IEC Rated, CE & RoHS Compliant
• Motor Controller Rated

Applications:
• Battery Management Systems
• Backup Power Supplies
• Valves
• Vending Equipment
• Lighting control
• Medical Equipment
• Test Equipment

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Panel Mount Solid State Relays

Sensata | Crydom EL Series DC output solid state relays come in a compact, 21 x 35 mm housing and offer ratings up to 20 Amps. These compact SSRs come with a pre-installed thermal pad, and are C-UL-US and TUV certified and CE compliant. The EL Series mechanical design includes quick connect terminals and an innovative 90° bent terminals option ideal for applications with limited vertical space.

Features:
• Ratings of 5A, 10A and 20A @ 3-100 VDC
• UL Recognized, TUV, CE and RoHS Compliant
• 5, 12 and 24 VDC control input options
• Mosfet Output
• Thermal Pad Included
• Plastic housing with min. 250 CTI rating (PLC2) for demanding applications

Applications:
• Battery Management Systems
• Backup Power Supplies
• Valves
• Vending Equipment
• Lighting control
• Medical Equipment

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Plug-In / PCB Mount Solid State Relays

Sensata | Crydom CN Series AC & DC Output Plug-in Solid State Relays are thin 5 mm wide relays ideally suited for high density PCB applications.

CN Series SSRs are designed to be pluggable into industry standard relay sockets or solderable into printed circuit boards, and they are available in ratings of 2 Amps at 24 to 280 VAC or 0.1 to 6 Amps at 0 to 100 VDC. They are UL recognized and CE compliant.

Features:
• 5 mm Mini SIP SSR
• Ratings 24VDC _3.5A, 48VDC _100mA, 100VDC _6A and 240VAC_2A
• DC Control, 5, 24 and 60 V
• UL & cUL recognized @ 40°C, 100K-Cycle Endurance Test
• CE & RoHS Compliant

Applications:
• Automation Equipment
• Test Equipment
• Packaging equipment
• Valves & Solenoids
• Vending Equipment
• Medical Equipment

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Din Rail Mount Solid State Relays

Sensata | Crydom SeriesOne DR family of DIN Rail mount Solid State Relays incorporate proprietary thermal management technology to achieve exceptional output ratings of 3 up to 24 Amps at 1 to 100 VDC in compact 11mm and 18mm wide housings. These compact SSRs are ideal for use in demanding applications where space may be limited, providing greater power density than other DIN Rail Solid State Relays.

Features:
• Ratings from 3 up to 24 Amps
• Load voltage ratings of 1-60 VDC and 1-100 VDC
• Fits standard 35mm DIN Rail
• LED Input Status Indicator
• DC Control
• UL and cUL Listed, CE & RoHS Compliant
• UL 508 Endurance Rating for Enhanced Reliability
• UL Class I and II, Division 2, for Hazardous Locations

Applications:
• Battery Management Systems
• Backup Power Supplies
• Valve Control
• Lighting Control
• Automation Equipment

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

New DC Output SSR Models:  DIN Rail, Panel Mount and Plug-in Solid State Relays

Sensata / Crydom are pleased to announce the expansion of their DC Output Solid State Relay offering. The new models extend across 4 popular series, including the SeriesOne DR, CN Series, EL Series and ED Series.

The number of applications for DC output relays is increasing, mainly due to the increase of portable devices, solar powered systems and electrification initiatives. Taking advantage of improved switching components, Sensata is expanding the current handling capability of select families of DC output SSRs, while maintaining the same form and factor.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Crydom announces a new addition to the NOVA22 product family, the PMP Series of panel mounted proportional control SSRs.

With ratings of up to 90 Amps @ 40°C these fully configurable relays are perfect for applications that require to control the amount of power delivered to a resistive load in proportion to an analog control input.

PMP Series are fully configurable Panel Mount proportional control relays with micro controller based technology designed to provide control of the power delivered to single-phase loads of up to 90 Amps at 90 to 600 VAC.

PMP Series SSRs vary the output power in proportion to an analog control input, which can be one of 3 signal types: 0-5 VDC, 0-10 VDC or 4-20 mA. The output can be controlled by 2 different methods, selectable on the unit: Phase Angle Control, and Burst Fire Control (with Distributive Zero Cross).

PMP Series proportional controllers are ideal for a wide range of applications that require control of the load power, such as for example lamp dimming and resistive heating control.

Main features of the PMP Series include:
-  Output ratings of 25, 50 and 90 Amps
-  Available in 3 operating voltage ranges: 90-280, 345-530 and 420-660 VAC
-  Selectable Operation Mode: Phase Angle or Burst Fire control
-  Selectable Control Input: 0-5 VDC, 0-10 VDC, 4-20 mA
-  50/60 Hz Adaptive Operational Frequency function
-  4-20 mA input does not require an auxiliary power supply
-  LED multifunction status indicator
-  Contactor configuration with "Elevator" screw terminals
-  Optional overvoltage protection (built-in TVS diode)

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Crydom is pleased to announce the expansion of their SOLICON DRC Series, now featuring new DRC3P 3-phase contactors with higher operating voltage rated at 600 VAC and an enhanced 18-30 VDC control input option for DRC3R Reversing models.

DRC Series
•  7.6 Amp AC Semiconductor Motor Controller
•  Load voltage range up to 600VAC
•  Fits standard 35mm DIN Rail
•  LED input status indicator
•  AC or DC control
•  Zero Voltage (resistive loads) or instantaneous (inductive loads) turn-on output
•  C-UL-US Listed, CCC Certified, IEC Rated, CE & RoHS Compliant, Horsepower Rated
•  Built-in Overvoltage Protection
•  Ultra-efficient thermal management design (Patented)

Solicon DRC3 Series are Solid State Contactors intended for frequently switching on and off three phase loads up to 5 HP, 600 VAC 7.6 Amps. They are available in both contactor versions
DRC3P and reversing contactor versions DRC3R.

The Solicon Contactor DRC3P is available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads). It is available in either 2 or 3 controlled leg versions. The 2 legs control version is particularly suitable for motor control circuits where the neutral conductor is not utilized.

The Solicon Reversing Contactor DRC3R includes an interlock control that allows only off, forward and reverse operation in a safe mode while providing high space saving; it switches
instantaneously upon application of the control voltage unless an instantaneous change of direction is commanded, then it will delay the direction change by 100msec in order to prevent
simultaneous forward and reverse operations.

All the models of Solicon DRC3 Series combine the benefits and advantages of a solid state contactor with the functionality and simplicity of use of an electromechanical contactor thanks to the proprietary thermal management technology (Patented) and complete electrical insulation (no grounding required); the embedded auxiliary contacts, normally open and/or normally
closed, are intended to be used at 18-280VAC. Five different control voltages are available in order to cover most applications. All models include overvoltage protection.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

DRML1, Crydom’s Load Monitoring Module designed to detect partial or total load failure
 of up to 8 loads and 50 Amps

Crydom introduces the DRML1 Load Monitoring Module, specially designed for NOVA22 solid-state relays which allows to monitor up to 8 heating elements, with similar current value, for a total current ranging from 1.2 Amps up to 50 Amps.

The DRML1 module measures the current value and compares it against a pre-set value (Teach value), which is stored during installation. Normal operation is monitored and failures are detected. An alarm is activated when the module detects undercurrents in the heating circuit below -12.5% of the nominal current. The module allows also for other alarm conditions to be detected such as: overcurrent condition (when the current exceeds the maximum of +12.5% of the nominal current), blown fuses (open load), damaged (short circuited SCR) and interrupted SSR, as well as those in half-wave operation. The nominal current value (Teach value) is set by the operator either with the "Teach-In" push button, placed on the front, or with the external “Teach-In” input.

The new DRML1 Load Monitoring Module offers three unique features in the market. It allows the user to select the maximum current value of 20 Amps or 50 Amps, operates with a minimum partial load detectable value of 150 mA and includes an adjustable alarm response delay (0.1 sec, 1 sec or 5 sec), selectable via a parameter selector switch. This avoids fault messages generated by voltage drops.

Malfunctions are indicated by a multicolor LED and can be localized systematically thanks to the alarm output which allows up to 128 DRML1 modules to be connected to a collective alarm. The LED indicates when power is ON and also when the Teach-In function is activated (Blue), when the input signal is ON (Green) and when an alarm condition is activated (Red).

The DRML1 is designed for direct installation on NOVA22 Solid State Relays contactor configuration versions (both Panel Mount PM22 Series and DIN Rail Mount DR22 Series models). The plastic enclosure provides IP20 level protection.

DRML1 can be used in different applications but its key advantages make it ideal for quality supervision of plastic parts production in injection molding machines, thermoforming machines and rubber parts production.

Main features include:
-  Up to 8 loads can be monitored
-  Selectable max current rating: 20 Amps or 50 Amps
-  Selectable alarm delay (0.1 sec, 1 sec, 5 sec)
-  Minimum current for single load: 150 mA
-  Alarms detected: undercurrent, overcurrent, open mains voltage, SSR fault
-  Alarm output: PNP open collector, 6-28 VDC, 100 mA
-  Up to 128 modules can be connected in parallel
-  Operating temperature: -25°C to +70°C
-  Pluggable module for both DIN Rail and Panel Mount NOVA22 SSRs
-  Multicolor LED with input status and alarm indication

Crydom’s DRML1 Module is C-UL-US Recognized and compliant to IEC 61000-4 (EMC) and IEC 60068-2 (Shock and Vibration) requirements. It’s also CE compliant to the Low Voltage Directive as well as the RoHS Directive.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/