The IWmAT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your 4-20 mA current application.

The IWmAT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for
further information).

Features:
• 4-20 mA wireless transmission
• Up to 500 m line-of-site range (depending on receiver)
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• User-selectable transmission update rates
• A range of receivers are available
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive and tortuous cable runs
• Analog Sensor Status – transmit 4-20 mA sensor outputs to a remote receiver

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWDigT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your digital switched or pulse counter application.

The IWDigT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for further information).

Features:
• Wireless transmission of single digital signal
• Up to 500 m line-of-site range (depending on receiver)
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receivers
• A range of receivers are available
• User-selectable transmission update rates
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive and tortuous cable runs
• Process Doors and Machine Access Points – monitor open/closed status
• Water, Gas, Electricity Meters – ingest a pulse counter input and transmit

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWCTT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

Operates with any Split Core current transformer which gives a mV AC output, typically 333mV.  It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your current measuring application.

The IWCTT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for further information).

Features:
• Operates with mV AC output current transformers
• Up to 500 m line-of-site range (depending on receiver)
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• User-selectable transmission update rates
• A range of receivers are available
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation - dispense with expensive and tortuous cable runs
• Service Contract - temporary installation for servicing and field trials
• Rotating Machinery - Transmit signals to/from rotating machinery without slip rings etc.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IoT Gateway allows virtually any sensor to be monitored from anywhere with a Cellular connection.

As standard the IoT Gateway accepts inputs from the following:
• Up to 128 IWT Industrial Wireless Transmitters
• 4 off 4-20 mA or 0-10 V analog inputs
• 8 off digital inputs
• 4 off Relay outputs
• Any Modbus enabled instrument over RS-232, RS-485, or Ethernet
• I²C and/or SPI sensors (may need custom software)
• The IoT Gateway uses the MQTT protocol to send this data to remote servers using the built-in 2G/3G or 4G modem.

As Standard, the remote server runs a standard web-based SCADA project which allows monitoring of the inputs and logged data from any device with an Cellular connection.
This package can also provide automated custom reports and email or SMS alarm messages.
Other options include a built-in GPS module and a local display showing input values and set-up information.

Features:
• Easy, real-time monitoring of remote assets via the internet
• Includes 2G/3G/4G modem and digital communications ports for data acquisition
• Input types include Analog/digital I/O, IWT wireless sensors, and I²C /SPi sensors
• Can be battery or 12-24 V dc powered

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Cynergy3 are pleased to announce the launching of their new IoT Portfolio. The IoT Portfolio includes 6 new transmitters and 3 new receivers, enhancing their existing product offering.

As the demand for wireless sensor networks increases in the development of smart infrastructure, Sensata is positioned as a key provider of wireless solutions.

By developing enabling products, such as receivers and IoT gateways, Sensata is expanding the solution set to directly meet customers needs.

Markets & Applications
• Smart Factories & General Manufacturing
• Alternative Energy
• Chemical
• Electronics
• Food & Beverage
• Machine Tool
• Packaging
• Semiconductor
• Oil & Gas
• Remote environmental/structural monitoring
• Many more…

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Sensasta (Cynergy3) are pleased to announce the launch of the FLPV Series of Float Switches from our Level and Flow product line to our Global Distribution Network.

The FLPV is a flameproof vertical float switch range, with single or dual float, designed to give the user a long reach with a number of switching options, catering to a wide variety of system requirements. Manufactured in stainless steel 316L material, these ATEX and PED certified switches are suitable use in many aggressive liquids or hygienic applications.

Their industry standard process connection sizes give a quick and reliable method of installation:
• Dual switch point for high/low indication
• Stainless Steel 316L material
• Fast switching, allowing precise control
• High life expectancy

Wherever there is a need to detect the level of fluid there may be a requirement for a level switch. To list all areas where this is applicable to the FLPV is prohibitive. However, the FLPV will be used as either
a process control device or system protection device. The FLPV is a reliable and robust switch due to its design and more cost effective compared to its competitors.

Typical examples of usage include storage overfill protection, pump run dry protection, and max-min level control. The FLPV Series is a great solution to address these requirements:
• Power ratings 10 VA
• Fast switching, allowing precise control
• Switching Voltage 200VAC / 120VDC
• High life expectancy
• 10 Bar Pressure rating

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Sensata is pleased to announce the Cynergy3 FSU Series Flow Detection Switch.

FSU Series switches have industry standard process connection sizes (push fit or NPT thread) that give a quick and reliable method of installation. The FSU Series of pre-set switches uses a reliable and robust reed switch design for operation. This family is NSF-61 certified and therefore meets the stringent requirements for the control of equipment that comes in contact with potable water.

These flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The switches are supplied with a standard wire length and flow rate set points, but can be customized to suit customer needs.

Why the FSU?
Wherever there is a need to detect the flow of fluid there may be a requirement for a flow switch. To list all areas where this is applicable to the FSU is prohibitive. However the FSU will be used as either a process
control device or system protection device. The FSU is compact, reliable and has very little pressure drop across the switch due to its design, and more cost effective compared to its competitors.

Typical examples of usage are, heater element protection, pump run dry protection, server room cooling flow failure detection or industrial or domestic water supply leak detection.

Applications:
- Circulation pump protection
- Leak detection
- Flow sensing
- Mains water control
- Dispensing Equipment
- Cooling system for electronic equipment (Laser Heads, Welding machine, X-Ray Tubes, Semiconductor Equipment)
- Processing Equipment, Water Purifications and Filtering, Distilling
- Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics

Features:
• NSF-61 approved
• Power ratings 25 VA
• Wide connection range
• Fast switching, allowing precise control
• Compact in-line design
• High life expectancy

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

SIL3 Functional Safety Incremental Encoders
With a robust and reliable design resulting in a wide range of secure products, which can be used in several types of configuration.

Any automated system potentially poses a risk to people, property or the environment. For this reason a number of safety measures have been taken. Safety standards have been created with one thing in mind: limiting risk.

With these standards as a framework, functional safety can, after a risk analysis, provide appropriate protection. Hazards are anticipated during the system design phase and are dealt with before they occur. These standards have evolved to increase the safety level and have been applicable since 2012.

Features
• Usable up to SIL3 and Cat.4 / PLe according to IEC 61508 / EN ISO
13849
• Suitable for safe motor feedback according to IEC 61800-5-2
• Robustness and excellent resistance to shock and vibration
• High protection level: IP65
• High temperature performance –20°C to +85°C
• Power supply 5Vdc or 11/30Vdc
• Digital TTL/RS422 or HTL or sine/cosine 1Vpp output
• Resolutions up to 2500ppr
• 58mm encoder, solid shaft 6mm, 9.52mm or 10mm (DSM5H), and
through shaft, standard 14mm (DSO5H)
• Connector or cable output (DSM5, side output only for DSO5)
• Stainless steel version available as an option (DSM5X) - consult factory
• Adapted anti-rotation system (DSO5H)

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

UL Approved*  D Size Form C (Changeover) Relay

•  100W switching power.
•  Changeover contacts.
•  PCB Mount.
•  Available with or without a magnetic screen.
•  Tungsten contacts for high power switching.
•  Large package size.
•  Up to 4A carry current.
•  Often used in applications which require circuit protection or circuit breakers.

The D1 series is a reed relay with changeover contacts which are often used in safety critical applications.

The switching is achieved through the use of high vacuum reed switches with Tungsten contacts and make these relays suitable for high reliability applications, such as test equipment and high voltage power supplies.

These are PCB mount relays, though custom options may be available on request.

*Consult factory for UL ratings:
These products have been UL approved for use as per pollution degree 2 classification.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/