The DRC3P Series is a family of DIN Rail Mount, IEC standard based Solid State Contactors with a proprietary thermal management technology, which allows them to switch on and off 3-phase loads of up to 7.6 Amps per phase at 600 VAC in a compact 45mm wide package.The DRC3P Series Solid State Contactors are particularly suited for demanding applications where you need to control (start/stop) 3-phase motors of up to 5HP at 480 VAC. They offer the highest switching frequency in the market (up to 9000 cycles per hour), making them the ideal solution for replacement of electromechanical contactors in applications that require high reliability and/or frequent switching.

The DRC3P Series models are available in 2 configurations (with 2 or 3 controlled legs) and they are available with optional embedded auxiliary contacts for additional functionality in your control circuits.

Features:

• LED input status indicator
• AC or DC control
• Zero voltage (resistive loads) or instantaneous (inductive loads) turn-on output
• Available with Solid State or EMR auxiliary contacts
• Built-in Overvoltage Protection
• UL 100 kA Short Circuit Current Rating
• C-UL-US listed, IEC rated, CE compliant, Horsepower Rated

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Chemical Processing Industry offers specific challenges for sensor design and development as the environment in which the sensor is used may be corrosive. There may be specific requirements for materials that can be used and measures that need to be taken to ensure accurate, durable performance.

Our sensors are used in a variety of environments where chemical exposure is necessary including provision of Level Sensors and Float Switches for industrial inkjet printing, and numerous Level and Flow Sensor applications to measure movement and storage of chemical liquids during industrial processing.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Sensata | Crydom SeriesOne DR family of DIN Rail mount Solid State Relays incorporate proprietary thermal management technology to achieve exceptional output ratings of 6 and 12 Amps in compact 11mm and 18mm wide housings.

These compact SSRs are ideal for use in heating, lighting or motion control applications where space may be limited, providing greater power density than other DIN Rail solid state relays.

SeriesOne DR SSRs are available in ratings of 3 to 12 Amps at 24 to 600 VAC.

Features:

• LED input status indicator
• AC or DC control input options
• Zero voltage or Instantaneous turn-on output
• UL and C-UL listed, HP rated, CE and RoHS compliant
• UL Class I and II, Division 2 approved, for use in hazardous locations
• ATEX certified versions available

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Nova22 DR67 is a compact 3-phase solid state relay in a DIN rail 67.5mm wide package with output ratings up to 75 Amps per channel @ 40°C. Its built-in overvoltage protection and the optional overtemperature protection make it suitable for demanding heating, motion and lighting applications.

It’s easy to install and its large cage clamp terminals allow connecting wires up to 2 AWG size on the output terminals without the use of any additional accessories, therefore reducing installation cost and time.

UL listed and VDE certified, the DR67 is a powerful and versatile solid state relay with superior performance when compared to previous generations and competitor products.

Features:

• Output ratings up to 75 Amps at 600 VAC
• 2 & 3 controlled Legs option
• Over Temperature protection w/alarm (optional)
• Built-in overvoltage protection
• IP20 touch-safe housing
• AC or DC control
• C-UL-US listed and VDE approved

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Supplying the military and aerospace industries with Relay and Sensor technology is a significant part of our business. We are proud to be trusted suppliers for this sector where accuracy, durability and reliability are often of paramount importance.

Our main areas of involvement include supply of Reed Relays for use in HF mobile communications, Float Switches and Level Sensors to monitor fuel tank levels.

Our Reed Relays are also used outside the military sector in HF ATUs that serve as a back-up communications method for commercial aircraft.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Nova22 DR45 is a powerful and compact solid state relay in a DIN rail 45mm wide package with an output rating up to 60 Amps @ 40°C offering mounting flexibility (on panel or DIN rail) and convenient input connection options. Its high I²t capability and optional built-in overvoltage protection make it suitable for demanding heating, motion and lighting applications.

Its contactor configuration and large cage clamp terminals allow connecting wires up to 3 AWG size on the output without the use of any additional accessories making them truly ready-to-use devices, therefore reducing installation cost and time.

UL Listed and VDE certified, the DR45 is a safe and versatile solid state relay with superior performance when compared to previous generation and competitor products in similar sized packages.

Features:

• Integral heat sink eliminates the need for complex thermal calculations
• Cage clamp terminal type accept up to 3 AWG wire size
• IP20 touch-safe housing
• Contactor configuration
• AC or DC control
• C-UL-US Listed and VDE approved

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

With precision and accuracy at the heart of what we do, it’s no surprise that our relays are used to measure, monitor and test in a huge number of different applications.

Our Reed Relays are used in a range of hi-tech testing equipment including Semiconductor testing, HV Insulation testing and Mass Spectrometers. The fast switching speed, low contact resistance and high voltage isolation (physical contact gap) our products can offer make them the perfect choice for these demanding applications.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Nova22 DR22 Series is a family of 22.5mm wide DIN Rail mount Solid State Relays with ratings up to 35 Amps at 600 VAC. The Relay or Contactor terminal configurations offer versatility and the possible use of plug-in connector for the control input, in either standard “screw” or “spring cage” terminals.

These powerful and ready to use SSRs come with an integral heat sink, eliminating the need for complex thermal calculations. DR22 Series models are C-UL-US approved.

Features:

• Built-in overvoltage protection
• DBC substrate for superior thermal performance
• Innovative “Elevator” screw option to allow the use of ring or lug type terminals
• IP20 touch-safe housing
• AC or DC control
• Zero voltage or instantaneous turn-on output
• "Low-Profile" models available with cost-effective TRIAC output at 280 VAC

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Sensata | Crydom offers an extensive line of DIN Rail mount Solid State Relays and Contactors to suit a broad range of market needs. DIN rail has become very common on industrial panels and cabinets, which makes DIN Rail mount one of the main mounting styles for industrial devices.

Our DIN Rail mount AC output solid state relays and contactors are available in single, dual, 3-phase and 4 channel configurations with ratings from 2 to 75 Amps per channel at 24 to 660 VAC and motor ratings of up to 5 HP at 480 VAC.

Housing width varies from 6mm for the lowest rated DIN rail AC solid state relay, up to 54mm for the 4 channel version. These DIN rail AC SSRs don’t require additional heat sinking, which makes them “ready-to-use”.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

High Frequency (HF) Communications devices are essential for military operations in the battlefield.

Our Reed Relays enable ATUs to transmit and receive voice and data information in a secure format. There are a variety of ATUs including Manpack portable units and vehicle based versions. In all applications our relays maintain reliable functionality whilst withstanding a tough battleground environment and rough handling in the line of duty.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/