The Nova22 DR22 Series is a family of 22.5mm wide DIN Rail mount Solid State Relays with ratings up to 35 Amps at 600 VAC. The Relay or Contactor terminal configurations offer versatility and the possible use of plug-in connector for the control input, in either standard “screw” or “spring cage” terminals.

These powerful and ready to use SSRs come with an integral heat sink, eliminating the need for complex thermal calculations. DR22 Series models are C-UL-US approved.

Features:

• Built-in overvoltage protection
• DBC substrate for superior thermal performance
• Innovative “Elevator” screw option to allow the use of ring or lug type terminals
• IP20 touch-safe housing
• AC or DC control
• Zero voltage or instantaneous turn-on output
• "Low-Profile" models available with cost-effective TRIAC output at 280 VAC

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Sensata | Crydom offers an extensive line of DIN Rail mount Solid State Relays and Contactors to suit a broad range of market needs. DIN rail has become very common on industrial panels and cabinets, which makes DIN Rail mount one of the main mounting styles for industrial devices.

Our DIN Rail mount AC output solid state relays and contactors are available in single, dual, 3-phase and 4 channel configurations with ratings from 2 to 75 Amps per channel at 24 to 660 VAC and motor ratings of up to 5 HP at 480 VAC.

Housing width varies from 6mm for the lowest rated DIN rail AC solid state relay, up to 54mm for the 4 channel version. These DIN rail AC SSRs don’t require additional heat sinking, which makes them “ready-to-use”.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Subminiature PCB relays

The 32 Series comprises miniature 6 A relays for printed circuit board mounting with the following features (according to Type)

Functions & Features:

• 1 Pole changeover contacts or 1 Pole normally open contact
• Subminiature, low profile package
• Sensitive DC coil: 200 mW – Wash tight: RT III

Applications:

• Copiers
• Hi-Fi Systems
• Washing Machiness
• Control Systems
• Electronic Kits
• Medical and Dentistry
• Electronic Circuit Boards
• Programmable Controllers

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

High Frequency (HF) Communications devices are essential for military operations in the battlefield.

Our Reed Relays enable ATUs to transmit and receive voice and data information in a secure format. There are a variety of ATUs including Manpack portable units and vehicle based versions. In all applications our relays maintain reliable functionality whilst withstanding a tough battleground environment and rough handling in the line of duty.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

30 Series Subminiature DIL Relays 2A

The 30 Series consists of a 2A dual in line relay for PCB mounting with the following features (according to Type)

Functions & Features:

• 2 Pole changeover contacts
• Low level switching capability
• Subminiature: – industry standard DIL package
• Sensitive DC coil: 200 mW
• Wash tight: RT III

Applications:

• Electronic Circuit Boards
• Hi-Fi Systems
• Printers
• Medical and Dentistry
• Toys
• Hoists and Cranes
• Door and Gate Openers

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Sensata, through the Crydom brand, continues to be the global leader in Solid State Switching technology for over 45 years, by offering the most extensive range of standard and custom solid state relays and contactors suitable for any load control application.

Sensata | Crydom has a broad offer of Solid State Relays and Contactors in several different mounting styles, covering a wide range of voltage and current ratings. Our Solid State Relays can be used to control almost any type of load in demanding heating, lighting, motion and power control applications that can benefit from the many advantages that SSRs have over traditional electromechanical relays, such as extended life expectancy, faster switching speed, lack of acoustical noise, higher resistance to shock and vibration, among others.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Type 93.01 screw terminal socket for 35 mm rail (EN 60715) mounting

Functions & Features:

• Nominal rating 6 A – 250 V
• Dielectric strength 6 kV (1.5/50 μs) between coil and contacts
• Protection category IP 20
• Maximum ambient temperature 60°C

Applications:

• Packaging Machines
• Bottling Plants
• Control Panels
• Traffic Light Controls
• Vending Machines
• Programmable Controllers
• Panels for Electrical Distribution
• Labelling Machines

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

E-T-A offers the world’s most comprehensive product portfolio and customised solutions in the areas of circuit breakers, circuit protectors, electronic overcurrent protection (DC and AC), relays and power distribution systems - intelligent, conventional or customer-specific.

Each E-T-A product holds competence, know-how and a reliability based on decades of experience. At the same time, one thing is always at the heart of our endeavours:  E-T-A products protect lives and values.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Our Panel Mount Solid State Relays are designed to easily mount on flat panels or heat sinks with screws through the SSR’s baseplate. Available in various industry standard sizes, the panel mount relay is currently the most used mounting type in the solid state relay market.

Our Panel Mount DC Output product offer provides a wide range of Solid State Relays available with current ratings of 3 to 160 Amps at 1 to 1000 VDC and motor ratings of up to 25 FLA/3 HP at 150 VDC, on single channel and motor reversing configurations.

These panel mount DC output SSRs are available with MOSFET technology to provide fast and reliable switching at high currents, and they are available with many different options such as screw terminals, quick connect terminals, optional protective covers, LED input indicators, and thermal interface pads, as well as heat sinks and other accessories.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The 1-DCL Series Panel Mount DC Solid State Relays offer MOSFET type output with low On-State resistance for reliable and fast switching of DC loads. These DC output SSRs are available with ratings up to 100 Amps at 100 VDC and 10 Amps at 500 VDC.

Features:
• UL approved, CE compliant to EN 60950-1
• DC control input: 3.5-32 VDC
• Reduces internal stress with epoxy-free design
• Level 3 EMC compliant

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/