The Type 18.21 and Type 18.31 ceiling-mount PIR movement detectors from Finder have been designed to detect the presence of body heat and movement within a defined sensing area, for the control of lighting in commercial, industrial and domestic premises.

There is considerable pressure to reduce energy consumption in public buildings and the workplace, both for reasons of cost and to meet legislative demands for more energy-efficient control of lighting, and these detectors will be of interest to designers, engineers, contractors and installers of lighting control systems for offices, factories, workshops, schools, hospitals, care homes and similar environments. They are particularly suitable for use in areas that do not require continuous lighting, such as stairwells, corridors, store rooms and washrooms.

The 18.31 is a shallow depth flush mounting recessed unit that offers neat, unobtrusive mounting in either suspended or plasterboard ceilings, even where space is limited, while the 18.21 is a low profile surface mounting version that is suitable for more solid surfaces where recessing is not practical. Both models feature a 110º sensing angle that provides coverage over an area of up to 8m diameter, and both also benefit from an integral adjustable threshold light sensor that allows operation to be varied relative to the ambient light level. An adjustable on-time gives the advantage of an adjustable delay before the lights are turned off after the detection of movement ceases.

Both versions are rated at 10A and 230V AC, and have a nominal lamp power rating of 1kW for incandescent and halogen bulbs and 350W for compensated fluorescent lights.

Packaged in a compact white plastic housing, these competitively priced products are ideally suited to a wide variety of installations.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Overview:
Optoelectronics is the integration of optical principles and semiconductor electronics. Optoelectronic components are reliable, cost-effective sensors. Standard infrared emitting diodes (IREDs), sensors and assemblies are covered.

Best Used For:
Object presence sensing, motion sensing, position encoding, limit sensing, movement detection and counting.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Honeywell Fiber Optic Sensor family consists of optoelectronic components and subassemblies (LEDs/transmitters, fiber-DIPs, receivers and modules). These products meet SERCOS and other standards.

Best Used For:
Short-haul data communications over plastic fiber, analog and digital interfaces and duplex communications over a single fiber.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The 18 Series of PIR movement detectors from Finder has been extended to include a new model that operates outdoors in addition to the existing indoor model. The units detect body heat to control lighting in a range of applications, including energy saving and security.

The detectors can reduce energy consumption by automatically switching off lighting when it is not required. This addresses the increasing pressure on companies from both governments and environmental groups to reduce energy consumption, which means that areas of unnecessary lighting have come under scrutiny.  In parallel to this, there is a need for improved lighting particularly in exterior areas to deter potential intruders.

Finder’s PIR detectors are targeted at designers, engineers, contractors and installers of lighting control systems in commercial, industrial and domestic premises.  They will be of particular use in areas inside and outside buildings that are not permanently occupied, such as offices, washrooms, corridors, stairwells and stores as well as outside loading bays, access ramps, etc. where constant lighting is not required.

The output contact for both the 18.01 interior model and the 18.11 exterior model is rated at 10A, with a 20A peak current capability, suitable for switching a 230V incandescent or halogen lighting load of up to 1kW or a compensated fluorescent lighting load rated at up to 350W.

The coverage area spans 110° in both the vertical and the horizontal plane, and the sensing range is specified up to 8m. An integral adjustable threshold light sensor ensures that energy is not wasted by preventing the lights from being switched on in conditions of high ambient light.

To avoid accidentally switching off lights when personnel are still in the lighting zone, the Series 18 PIR units feature an extended ‘on time’. This enables the length of time the lights remain on after movement detection ceases to be extended by a preset delay time, which can be adjusted to between 10 and 180 seconds.

The versatile design of both Series 18 PIR models features a ball joint construction that enables simple, trouble free mounting on a flat vertical or horizontal surface, with the ability to angle the detection head to adjust the required detection area by up to 180° in the horizontal plane, and 27° in the vertical plane.

The 18.01 model allows concealed cable entry via the mounting bracket, while the IP54 protected 18.11 exterior model features a PG9 cable gland entry in the base. The electrical contacts are lead-free AgSnO2.

The Series 18 PIR range is entirely designed and manufactured in-house at Finder’s European facility near Turin in Italy. The design includes custom embedded system programming, CAD evolved optics, custom designed electronics, tooling and test equipment.  The units are competitively priced and offer specifiers and end users a European designed and built PIR with unparalleled flexibility, in a neat and compact housing.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

High Reliability even with Aggressive Media

E-T-A Circuit Breakers has introduced a new, tube sensor for non-contact, long-life detection and signalling of MIN or MAX liquid levels. Easily snap-fitted to a tube, the TLS100 features solid state circuitry to provide extremely precise and reliable operation for complex or sophisticated applications in process industries such as food, chemicals and pharmaceuticals as well as with medical equipment.

The compact E-T-A TLS100 Tube Sensor is a non-contact, capacitive sensor providing reliable limit-value monitoring over a long life span. It is designed to easily clip onto a tube or pipe, enabling monitoring of water and similar low viscosity liquids, aggressive or not. Two mounting lugs also enable additional local fixing for security. The tubes can be of plastic or glass with up to a 4mm wall thickness. Clips can be specified for tube diameters of 10mm, 15mm or 25mm. Even containers with difficult designs can be monitored by means of a simple by-pass tube.

The TLS100 has a micro-controller at its core to control key functions such as switch point, MIN or MAX monitoring and response delay. Adjustment is via a 15-step potentiometer on the body of the sensor. The solid state circuitry ensures extremely precise, reliable operation with minimal maintenance, thanks to the absence of moving parts. Running from a 12V DC or 24V DC supply, it offers a short-circuit and overload-proof plus or minus switching output signal of up to 1A. The supply and signalling lead is optionally built-in or plugged in.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/