The IWR-1 is a single channel receiver designed to pair with any of the Sensata range of IWT wireless transmitters to form a cost-effective replacement of traditional wired transducers. This offers a low cost solution to inaccessible or expensive installation environment.

The receiver has a user selectable voltage or mA output corresponding to the calibrated range of the remote Wireless Transducer and 5A rated changeover contacts for alarm functionality.

User configuration is possible, however the single channel transmitter/ receiver combination is designed to work ‘out of the box’ offering a simple plug and play solution to remote measurement applications. With the standard 0dBI antenna, a line-of-sight range of up to 500 m can be achieved and, using the optional 3dBI antenna, up to 750m (LOS) is achievable.

Features:
• Pairs with the IWT range of wireless transmitters
• User-selectable 1-5V or 4-20 mA receiver output
• Clean contact output for process, low battery or loss of signal alarm function
• Simple DIL switch pairing with the IWT transmitters
• Up to 500 m range, line-of-sight
• 12 to 32 V dc powered
• End-to-end accuracy of ±0.25% FS BFSL
• LED indication of wireless link
• DIN rail or wall mounting kits available
• Five channel receiver available - see data sheet IWR-5

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWPTU Wireless Pressure Transducer is a cost effective replacement to a traditionally wired pressure transducer that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to the compatible IWR family of single- or five-channel wireless receivers thus offering a “plug and play” solution to your pressure measurement applications.

The instrument uses a piezo-resistive ceramic sensor mounted within a 316 stainless steel housing giving excellent media compatibility for the harshest of applications.

The IWPT sensor can be used with either an IWR-1 or IWR-5 receiver. A line-of-sight range of up to 1640 ft is possible depending on the wireless receiver used. (refer to datasheets IWR-1 & IWR-5 for further information)

Each device is temperature compensated, calibrated and supplied with a traceable serial number.

Features:
• Suitable for use with liquids and gases
• Pressure ranges from -15 to +5800 psi gauge
• Up to 1640 ft line-of-site range (depending on receiver)
• Piezo-resistive thick film ceramic sensor with stainless steel body
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• Single or five channel receivers available
• User-selectable transmission update rates
• User-selectable 1-5V or 4-20 mA receiver outputs
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive cable runs
• Environmental monitoring – pumping stations, sewage plants, water treatment
• Facilities management – boiler rooms, plant hydraulics, plant pneumatics
• Asset monitoring – tanks farms, process plants, HVAC and building management
• Service Contract – temporary installation for servicing and field trials

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWPTL Wireless Pressure Transducer is a cost effective replacement to a traditionally wired pressure transducer that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to the compatible IWR family of single- or five-channel wireless receivers thus offering a “plug and play” solution to your pressure measurement applications.

The instrument uses a piezo-resistive silicon sensor mounted within a 316 stainless steel housing giving excellent media compatibility for the harshest of applications. A swivel adaptor is available which allows the head to be easily aligned to the IWR receiver - see IWPT-SA.

The IWPT sensor can be used with either an IWR-1 or IWR-5 receiver. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to datasheets IWR-1 & IWR-5 for further information).

Each device is temperature compensated, calibrated and supplied with a traceable serial number.

Features:
• Suitable for liquids and gases
• Pressure ranges from 0-50mbar to 0-1000mbar gauge
• Up to 500 m line-of-site range (depending on receiver)
• Piezo-resistive stainless steel sensor with stainless steel body
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• Single or five channel receivers available
• User-selectable transmission update rates
• User-selectable 1-5V or 4-20 mA receiver outputs
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive cable runs
• Environmental monitoring – rainwater harvesting, environmental engineering
• Facilities management – boiler rooms, laboratory testing, tank gauging
• Asset monitoring – tanks farms, process plants, HVAC and building management
• Service Contract – temporary installation for servicing and field trials

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWPTLU Wireless Pressure Transducer is a cost effective replacement to a traditionally wired pressure transducer that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to the compatible IWR family of single- or five-channel wireless receivers thus offering a “plug and play” solution to your pressure measurement applications.

The instrument uses a piezo-resistive silicon sensor mounted within a 316 stainless steel housing giving excellent media compatibility for the harshest of applications.

The IWPT sensor can be used with either an IWR-1 or IWR-5 receiver. A line-of-sight range of up to 1640 ft is possible depending on the wireless receiver used. (refer to datasheets IWR-1 & IWR-5 for further information)

Each device is temperature compensated, calibrated and supplied with a traceable serial number.

Features:
• Suitable for liquids and gases
• Pressure ranges from 0-1psi to 0-15psi gauge/abs
• Up to 1640 ft line-of-site range (depending on receiver)
• Piezo-resistive stainless steel sensor with stainless steel body
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• Single or five channel receivers available
• User-selectable transmission update rates
• User-selectable 1-5V or 4-20 mA receiver outputs
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive cable runs
• Environmental monitoring – rainwater harvesting, environmental engineering
• Facilities management – boiler rooms, laboratory testing, tank gauging
• Asset monitoring – tanks farms, process plants, HVAC and building management
• Service Contract – temporary installation for servicing and field trials

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWmAT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your 4-20 mA current application.

The IWmAT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for
further information).

Features:
• 4-20 mA wireless transmission
• Up to 500 m line-of-site range (depending on receiver)
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• User-selectable transmission update rates
• A range of receivers are available
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive and tortuous cable runs
• Analog Sensor Status – transmit 4-20 mA sensor outputs to a remote receiver

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWDigT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your digital switched or pulse counter application.

The IWDigT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for further information).

Features:
• Wireless transmission of single digital signal
• Up to 500 m line-of-site range (depending on receiver)
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receivers
• A range of receivers are available
• User-selectable transmission update rates
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation – dispense with expensive and tortuous cable runs
• Process Doors and Machine Access Points – monitor open/closed status
• Water, Gas, Electricity Meters – ingest a pulse counter input and transmit

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IWCTT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.

Operates with any Split Core current transformer which gives a mV AC output, typically 333mV.  It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your current measuring application.

The IWCTT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for further information).

Features:
• Operates with mV AC output current transformers
• Up to 500 m line-of-site range (depending on receiver)
• Five-year battery life at 10 second transmission update rate
• Simple DIL switch pairing with the single or five channel receiver
• User-selectable transmission update rates
• A range of receivers are available
• Receiver clean contacts provide process alarm functions

Typical Applications Include:
• Simple cable replacement installation - dispense with expensive and tortuous cable runs
• Service Contract - temporary installation for servicing and field trials
• Rotating Machinery - Transmit signals to/from rotating machinery without slip rings etc.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The IoT Gateway allows virtually any sensor to be monitored from anywhere with a Cellular connection.

As standard the IoT Gateway accepts inputs from the following:
• Up to 128 IWT Industrial Wireless Transmitters
• 4 off 4-20 mA or 0-10 V analog inputs
• 8 off digital inputs
• 4 off Relay outputs
• Any Modbus enabled instrument over RS-232, RS-485, or Ethernet
• I²C and/or SPI sensors (may need custom software)
• The IoT Gateway uses the MQTT protocol to send this data to remote servers using the built-in 2G/3G or 4G modem.

As Standard, the remote server runs a standard web-based SCADA project which allows monitoring of the inputs and logged data from any device with an Cellular connection.
This package can also provide automated custom reports and email or SMS alarm messages.
Other options include a built-in GPS module and a local display showing input values and set-up information.

Features:
• Easy, real-time monitoring of remote assets via the internet
• Includes 2G/3G/4G modem and digital communications ports for data acquisition
• Input types include Analog/digital I/O, IWT wireless sensors, and I²C /SPi sensors
• Can be battery or 12-24 V dc powered

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Cynergy3 are pleased to announce the launching of their new IoT Portfolio. The IoT Portfolio includes 6 new transmitters and 3 new receivers, enhancing their existing product offering.

As the demand for wireless sensor networks increases in the development of smart infrastructure, Sensata is positioned as a key provider of wireless solutions.

By developing enabling products, such as receivers and IoT gateways, Sensata is expanding the solution set to directly meet customers needs.

Markets & Applications
• Smart Factories & General Manufacturing
• Alternative Energy
• Chemical
• Electronics
• Food & Beverage
• Machine Tool
• Packaging
• Semiconductor
• Oil & Gas
• Remote environmental/structural monitoring
• Many more…

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Finder was one of the first manufacturers to integrate NFC technology for the programming and control of its devices (first launched in 2015). NFC programming, which until now has only been available on Android smartphones, is now also possible on Apple devices (iPhone 7 and later).

With the Finder Toolbox NFC app for iOS you can now program from your iPhone various products such as the Finder SMARTimer, and numerous Finder time switches and digital astro switches. In 2019 Apple estimated that there were more than 900 million iPhones in use worldwide, hence this app will allow a large number of new users to take full advantage of the Finder range of NFC smart products, boosting sales of the 12 and 84 Series.

New features of the Finder Toolbox NFC app for iOS include:
• Simplified user interface and experience
• New faster and more intuitive menus
• Quicker upload time and overall performance

What are the advantages of NFC?
• Easier reading of devices inside electrical panels
• Faster programming via the app and easier maintenance
• The possibility of naming and saving configurations

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/