Hylec-APL has launched a new range of quick installation connectors which allow users to make connection by simply pushing the wire into the opening. They are ideal for applications that require the common connection of multiple conductors such as lighting ring-main cabling connections in ceiling voids.

* Plated brass inserts clamp the wire in place once inserted to form the connection.
* Transparent side plates facilitate a view of the internal connections.
* Units are colour coded per size (2 – 8 conductors).
* Dovetail slots make stacking easy for neat wiring.
* 10mm high, 18mm wide and 10mm-30mm long depending on entry points.
* Accommodate wire dimensions between 0.5mm and 2.5mm.
* Fully comply to IEC/EN 60998-1 and 60998-2-2 standards.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

External display advertising is an effective means of communicating a message to a wide and diverse audience. Stock Displays is one of the UK’s leading manufacturers of high-spec internal and external display products for use in public areas. With several prestigious clients Stock Displays needed to be sure that its products can withstand daily use and continue to display advertising messages in wind, rain and snow.

Fortunately Hylec-APL was able to offer a solution which met all of the company’s needs.

*  All-new Mini-TEETUBE series TH391 is the latest addition to the innovative TEE family of weatherproof products which offer quick and easy installation with IP68 ingress protection.

*  TH391 is one of the smallest IP68 electrical connectors on the market which doesn’t depend on silicone gel to prevent moisture ingress.

*  The connector uses a unique design which sees the terminal block forming part of the external housing to achieve its tiny footprint.

* IP68 seal is then formed using the dome topped cable glands which form the entry points of the connector.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has introduced a new comprehensive range of Steatite ceramic terminal blocks which are ideal for wire termination in demanding high temperature applications.

The Steatite ceramic terminal blocks have several characteristics which make them advantageous over existing porcelain ceramic products. These include higher density, better bending/compression strength, greater elasticity, higher dielectric strength and being non-flammable and temperature resistant with dimensional stability up to 1,000˚C.

*  The terminal blocks are suitable for use in applications with continuous temperatures of up to 350˚C.
*  Range is available with two or three poles and in a choice of sizes.
*  Steatite terminal blocks include screw mounting holes which are M3, M3.5 or M4 in size.
*  Steatite, or soapstone, can be easily shaped and its electrical characteristics make it ideal as an insulator or housing for electrical components.
*  The range complements Hylec’s existing line of polyamide and polypropylene products.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

'Kwik-Snap' terminal blocks from Hylec-APL can reduce installation time on site by allowing users to remove the desired number of poles from a strip with the simple twist of the hand. Unlike similar products on the market, the Kwik-Snap is made from polypropylene which eliminates the risk of fire from arcing.

* Quickly snap off the required number of poles – No tools required, saves time, saves money.
*  Pole divider still strong enough to support mounting screws for surface mounting.
*  Plated metals inserts with zinc-plated steel screws.
*  12 pole strips with wiring capacity from 4mm2 to 16mm2
*  Suitable for ambient temps to 85 degrees C
*  High melting point removes risk of fire from arcing.
*  VDE approved.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has launched a new series of lockable door enclosures to complement its growing range of electrical housings. Manufactured by Hylec-APL company, DE Controls, these lockable enclosures are constructed from a flame proof material with galvanised steel back plates and mounting brackets.

* IP65 ingress protection.
* IK08 combustible standards.
* 3 - 3.5mm wall thickness provides rugged protection.
* Available in sizes ranging from 200 x 300 x 130mm to 500 x 700 x 250mm.
* Standard operating temperature range: -20˚C to 85˚C.
* Available with transparent polycarbonate door where required.
* Suitable for internal and external applications.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

While most waterproof electrical connectors on the marked are cumbersome and awkward to install, Hylec-APL has bucked the trend with its weatherproof range. Its latest offering, the mini-TEETUBE, has a diameter that is smaller than a 50p piece yet offers IP68 protection in a matter of minutes.

* 2, 3 or 4 pole IP68 connections.
* Compact size/Rapid installation (68mm long and 23mm Ø)
* Wire piercing terminal options available.
* Uses terminal housing as part of the connector body.
* Registered design.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL’s patented weatherproof TeePlug connectors have been used to form safe electrical connection on some of the world’s biggest aquaria. A leading designer of luxury aquaria for both private and public consumers uses the discrete plug and socket connectors as it finds traditional industrial systems cumbersome and time consuming to install.

*  Offers a quick IP68 electrical connection.
*  Ensures waterproof protection to a depth of 50 metres (Depending on model chosen).
*  Aesthetic and discrete design.
*  In-line male and female design allows for pre-wiring.
*  Twist-lock or screw down collar to secure the connection.
*  From just 90mm long (when closed).
*  2-6 pole connection.
*  Part of the weatherproof TeeFamily range of connectors.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL's latest small sized Paguro junction box utilizes an innovative adaptor which allows it to accommodate a wide range of cable diameters whilst still maintaining good cable retention. The junction box is ready packaged with a silicone sealing gel to ensure IP68 ingress protection.

* Specialised adapters allow secure entry for cables between 6.5mm to 12mm Ø
* Small footprint of only 44 x 95 x 24mm
* Supplied with 3 or 4 pole terminal block.
* Silicone gel is supplied pre-loaded so the product is ready to use.
* The silicone gel features a unique elastic memory which enables re-wiring of the junction box without replacing the gel.
* IP68 protection provides ingress protection when fully submerged in water or buried below ground. 

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has launched a new series of control stations; manufactured and assembled by Hylec company, DE Controls. The new control stations combine tough IP67 enclosures with hard wearing push button and twist switches and are supplied with snap-on brackets for quick and easy wall, chassis and DIN rail mounting.

* Features a time-saving snap-on bracket mounting option.
* Patented range of control stations available exclusively from Hylec-APL.
* Up to IP67 protection available.
* Conforms to EN418 'latch-before-break' safety standard.
* 5mm wall thickness provides enough strength to replace many metal enclosures.
* Available with a huge range of buttons and switches; many variations available pre-assembled.
* Complete with 2 x M20 threaded cable gland entry.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL, has launched a new series of patented door enclosures to complement its growing range of electrical housings and connectors. Constructed from flame proof ABS material the IP65 enclosures can be used in most internal and external applications.

* Ingress protection and combustible standards IP65 and IK08
* Suitable for external locations including exposure to salty sea air
* Eight sizes available
* Steel back plate, mounting wall brackets and lockable key as standard
* Transparent polycarbonate door options available 

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/