Schurter launches a new choke family for very high currents. The new current-compensated choke DKUH-1 is designed for currents from 50 to 100A. Thanks to the high voltage of 800 VDC, they are suitable for high-power energy applications.
Powerful energy applications are becoming increasingly compact. This compact design, combined with high energy efficiency, leads to an increase in electromagnetic interference in modern electronic devices. High performance filter elements are required to combat this interference. Due to the compact dimensions, integration of the filter elements on printed circuit boards is an ideal solution. The new DKUH-1 series of chokes is particularly suitable for applications with high power consumption.
High-Performance Versions
The bifilar winding and nanocrystalline cores enable very high currents in relatively compact dimensions. The chokes are designed for high performance applications with high voltages up to 800 VDC.
Applications
The new high-current chokes are ideal for energy applications such as EV fast-charging stations, battery storage, photovoltaics, and energy converters. Additionally, the new chokes are also the ideal solution for many high-power industrial applications.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
1-Phase High Current Choke in Vertical Design
• Small footprint on the printed circuit board
• Open design optimizes heat dissipation
• Compact and lightweight
• Nanocrystalline or ferrite ring cores
Schurter expands its range of current-compensated chokes for printed circuit board mounting, to include a series for 1-phase high-current applications. Due to the vertical design, the new DKIV-1 series sports a significantly smaller footprint. The chokes are available with a ferrite or nanocrystalline core for rated currents from 10 A to 50 A. The open design makes the chokes particularly compact and lightweight.
Like all other aspects of electronic design, the power circuit is oftentimes built today using discrete components on printed circuit boards. With the trend toward integrating components, to achieve smaller and smaller form factors, thermal problems and high current on the PCB can become a challenge. Traditional block filters might well address these challenges, but their larger package size also presents challenges due to the mentioned space constraints; therefore, an effective asymmetrical common mode choke, together with capacitors mounted on the PCB, is a better solution
Compact and Lightweight
The new DKIV-1 series is designed for 1-phase applications at rated currents from 10 A to 50 A. Even at the max. rating, the vertical choke requires only a small footprint on the PCB, thus allowing a compact design with high performance. The compact and lightweight current-compensated chokes are throughhole mounted. They are ideal for multistage filter applications, where the combination of a vertical choke (DKIV) with a horizontal choke (DKIH) reduces the mutual interference of the magnetic fields of the individual chokes.
Performance and Approvals
The DKIV-1 current compensated chokes comply with IEC 60938 and with a rated voltage of 300 VAC or 450 VDC, they are suitable for almost any application. The DKIV-1 series is certified for current ratings from 10 to 50 A, 300 VAC according to IEC and UL and 10 to 50 A, 250 VAC according to CSA. The chokes have ENEC and cURus approvals. The DKIV-1 series has been designed for a wide temperature range of -40 °C to +100 °C.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Common Mode Chokes for 4 line Applications mount on PCB
• Compact size and light weight
• Open design for optimal cooling
• Nanocrystalline ring cores
• Customer specific pin configurations available
Schurter expands its successful range of current-compensated chokes with a series for 4-wire high-current applications on printed circuit boards. The new DKIH-4 series is available for three phase applications with neutral line at rated currents from 10 A to 40 A. Due to the open design, the chokes are particularly compact and light.
Like most electronic assemblies, the power section is increasingly being mounted on the printed circuit board with discrete components. However, due to the high integration density required to achieve a compact design, thermal problems can arise due to the high currents on the PCB. EMC interference can affect adjacent modules due to the lack of spatial separation. Therefore, a compact filter on the PCB with discrete components is often the best solution. A current-compensated choke with capacitors is the most efficient method of suppressing EMC interference.
The new DKIH-4 series is suitable for three phase applications with neutral line from 10 A up to 40 A . Light weight and compact, the common mode chokes are easily placed on the PCB with through hole technology (THT). The common mode chokes are designed according IEC 60938 and rated 500 VAC or 760 VAC, making them suitable for almost any applications.
The DKIH-4 has been designed for a wide temperature range from -40 °C to +100 °C. In addition to the standard versions, customer-specific pin configurations or variants can be created on request.
Technical Data / Approvals
- Rated voltage: 500 VAC, 760 VAC
- Rated currents: 10 to 40 A at 40°C
- Rated inductance: 0.75 to 6.50 mH
- Other pin outs available on request
Application
- Frequency converters for photovoltaic or energy storage
- Charge stations for electric vehicles
- UPS-systems
- Switching power supplies
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Schurter expands its wide range of current compensated chokes with new customer specific variants for 4-wire-applications on PCB. The new DKIH series is now available with ferrite or nanocrystalline ring core. The new product is designed for three phases plus neutral wire applications with rated currents from 10 A to 50 A. Due to its open design, the chokes are light weight and compact, ideally designed to suppress EMC noise caused by power applications on the PCB.
Like all other aspects of electronic design, the power portion is often built today using discrete components on printed circuit boards. With the trending integration of components, to achieve smaller and smaller form factors, thermal problems and high currents on the PCB can become a challenge. The resulting EMC interferences can affect adjacent modules because of the lack of spatial separation. Therefore, a compact filter on the circuit board with discrete components is often the best solution. A current-compensated choke with capacitors is the most efficient measure for the suppression of EMC interferences.
The DKIH-4 series is suitable for three phases AC and neutral wire applications from 10 A up to 50 A. The common mode chokes are also designed according IEC 60938 and are rated 600 VAC making them suitable for many applications such as UPS systems, switching power supplies, charge stations for electric vehicles and frequency converters for energy storage. The DKIH-4 has a wide temperature range of -40 °C to +100 °C. They are available with a standard pin configuration or customer specific ones. Variations in the winding are also available upon request.
Technical Data
- Rated voltage: 600 VAC
- Rated currents: 10 to 50 A at 40 °C
- Same dimensions and weight for ferrite and nanocrystalline versions
- customer specific pin outs available on request
Application
- Frequency converters for photovoltaic or energy storage
- Charge stations for electric vehicles
- UPS systems
- Switching power supplies
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Nanocrystalline Common Mode Chokes for 1 and 3-Phase Applications Mount on PCB
Schurter expands its wide range of current compensated chokes with high current types for PCB mounting. The new DKIH series is now available with a nanocrystalline ring core, offering 8 times higher inductance performance than ferrite core versions in the same compact dimension. The new product is designed for single and three phase applications with rated currents from 10 to 50 amperes. Due to its open design, the chokes are light weight and compact, ideally designed to suppress EMI noise caused by power applications on the PCB.
Like all other aspects of electronic design, the power portion is oftentimes built today using discrete components on printed circuit boards. With the trending integration of components, to achieve smaller and smaller form factors, thermal problems and high currents on the PCB can become a challenge.
Traditional block filters might well address these challenges, but their larger package size also presents challenges due to the mentioned space constraints; therefore an asymmetrical effective common mode choke and capacitors mounted on the PCB is a better solution.
The new DKIH-1 series is suitable for single phase AC or DC applications from 10 up to 50 amperes. Light weight and compact, the common mode chokes are easily placed on the PCB with through hole technology (THT). They are designed and approved according IEC 60938, UL 1283 and CSA 22.2 no. 8. The voltage rating is 300 VAC (IEC, UL) and 250 VAC (CSA) with an inductance range of 1.6 to 6.9 mH.
The new DKIH-3 series is suitable for three phase AC applications from 10 up to 50 amperes. The common mode chokes are also designed according IEC 60938 and are rated 600 VAC with an inductance range of 0.7 to 10.8 mH, making them suitable for many applications such as UPS systems, switching power supplies, charge stations for electric vehicles and frequency converters for energy storage.
The DKIH-1 and -3 have a wide temperature range of -40 to +100 °C. They are available with a standard pin out or customer specific pin out. Variations in the winding are also available upon request.
DKIH-1
- Rated voltage: 300 VAC (UL, ENEC), 250 VAC (CSA), 425 VDC
- Rated currents: 10 to 50 A (ENEC / UL / CSA) at 40 °C
- Rated inductance: ferrite: 0.15 to 0.80 mH, nanocrystalline: 1.4 – 6.9 mH
- Same dimensions and weight for ferrite and nanocrystalline versions
- Other pin outs available on request
DKIH-3
- Rated voltage: 600 VAC
- Rated currents: 10 to 50 A at 40 °C
- Rated inductance: ferrite: 0.08 to 1.10 mH, nanocrystalline: 0.7 – 10.8 mH
- Same dimensions and weight for ferrite and nanocrystalline versions
- Other pin outs available on request
Application
- Frequency converters for photovoltaic or energy storage
- Charge stations for electric vehicles
- UPS-systems
- Switching power supplies
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Schurter expands its wide range of current compensated chokes with high current types for PCB mounting. The new DKIH series are available for single and three phase applications with rated currents from 10 to 50 amperes. Due to its open design, the chokes are light weight and compact, ideally designed to suppress EMI noise caused by power applications on the PCB.
Like all other aspects of electronic design, the power portion is oftentimes built today using discrete components on printed circuit boards. With the trending integration of components, to achieve smaller and smaller form factors, thermal problems and high currents on the PCB can arise. It also becomes increasingly challenging to meet EMC requirements with a filter package due to the resulting space constraints; therefore a filter on PCB with discrete components is a good solution. Next, the capacitors and a common mode choke, with asymmetrical effective inductance, are very effective to dampen EMI noise.
The new DKIH-1 series is suitable for single phase AC or DC applications from 10 up to 50 amperes. Light weight and compact, the common mode chokes are easily placed on the PCB with through hole technology (THT). They are designed and approved according IEC 60938, UL 1283 and CSA 22.2 no. 8. The voltage rating is 300 VAC (IEC, UL) and 250 VAC (CSA).
The new DKIH-3 series is suitable for three phase AC applications from 10 up to 50 amperes. The common mode chokes are also designed according IEC 60938 and are rated 600 VAC, making them suitable for many applications.
The DKIH-1 and -3 have a wide temperature range of -40 to +100°C. They are available with a standard pin out or customer specific pin out. Variations in the winding are also available on request.
Technial Data DKIH-1:
- Rated voltage: 300 VAC (UL, ENEC), 250 VAC (CSA), 425 VDC
- Rated currents: 10 to 50 A (ENEC / UL / CSA) at 40°C
- Rated inductance: 0.15 to 0.80 mH
- Other pin outs available on request
Technical Data DKIH-3:
- Rated voltage: 600 VAC
- Rated currents: 10 to 50 A at 40°C
- Rated inductance: 0.08 to 1.10 mH
- Other pin outs available on request
Application:
- Frequency converters for photovoltaic or energy storage
- Charge stations for electric vehicles
- UPS-systems
- Switching power supplies
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2024.
UK distributor of electrical and electronic components.
