The 4C Series is a new series of single-pole and two-pole relay interface modules from Finder that incorporate Finder’s flagship 46 Series miniature industrial relays, and are available in either screw terminal or screwless socket types. The modules provide an ideal interface between programmable logic controllers (PLC) or other electronic controllers and external actuators or switching devices, where outputs are required to switch higher than normal external loads such as large contactors, solenoids, small motors or heating elements.

The 4C.01 and 4C.02 are respectively a single-pole 16A and a two-pole 8A relay interface module, both with screw terminal connections, while the 4C.51 is a screwless single-pole model rated as 10A and the 4C.52 is an 8A two-pole screwless version. All four models are available with either AC or DC coils, and can be mounted on a 35mm DIN rail (EN 50022). They feature instant ejection of the relay from the socket by means of a plastic retaining clip, and include as standard both a supply status indication and coil suppression module.

An 8-way jumper link is available as an optional extra for use with the 4C.01 and 4C.02 modules, and reduces the time taken to wire common connections.

The 4C.01 and 4C.02 screw-type terminal modules both measure 82.9mm long x 64.6mm high x 15.8 mm wide, while the screwless 4C.51 and 4C.52 versions both measure 95.6mm long x 61.7 mm high x 15.8 mm wide. The cadmium-free relay contacts are fabricated from silver nickel (AgNi) material.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

 
Finder introduces the 72.31 three-phase monitoring relay, which is used for detecting a loss of phase or incorrect phase rotation when using three-phase supplies. This compact relay is ideally suited for the protection of motors in plant and machinery, and helps to satisfy the mandatory requirement of ensuring the correct rotation of motors in transportable equipment.

The 72.31 allows OEMs, panel builders and installers of control systems to ensure that motors do not become permanently damaged due to phase loss, and also to avoid potential hazards or damage due to incorrect rotation of the motors. The relay features positive safety logic, which triggers the contact to open if an error is detected so that the system will fail to a safe condition. The wide supply voltage specification allows a single unit to be used across the full three-phase supply voltage range of 208V to 480V AC.

The relay provides reliable monitoring of phase loss, even under conditions where the lost phase may be “regenerated” by the action of the rotating motor. This phenomenon is not uncommon, and many monitoring relay units that are currently available may falsely detect this phase regeneration and thus fail to disconnect the supply, which can cause damage to the motor. The 72.31 can discriminate phase regeneration up to 80% of the line voltage.

Featuring a SPDT output contact rated at 6A (maximum peak 15A), the 72.31 monitoring relay is enclosed in a compact housing measuring 84mm high x 56.5mm deep x 17.5mm wide. The narrow profile offers considerable saving in panel space.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Logic Controllers            Safety Relays          Electronic Timer Relays 

Control Relays                Temperature Controllers                Counters 

Crouzet has been accompanying our customers in the design and production of automation products, whatever the end application may be, for more than 30 years.

Crouzet places all its know-how at the disposal of its customers to answer customisation needs and adapt our products and the accessories. To guarantee that our products integrate perfectly in all equipment, Crouzet customises its products to any environment or application.

From pure Research and Development to the simplest improvement to a standard product, we can offer you customised products while continuing to innovate : from specific connections for motors through specific functions developed for you on the MilleniumII+, Crouzet is at your service to listen to you and answer your need.

Across the globe, Crouzet places its technical and industrial know-how at our customers' disposal to guarantee that our solutions integrate perfectly in all your applications.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Finder 86 series miniature plug-in time delay modules can be used with a wide range of Finder rail-mounted relay socket combinations including the latest 46 Series Industrial Relays. The timer modules in the 86 series are among the smallest and most versatile currently available.

The modules offer the ability to introduce a time delay to the operation of relays, and are ideally suited for use with control circuits that require a delayed relay response in order to ensure the correct functioning of logic or sequence. The timer modules can either be fitted during panel assembly or retrofitted without any need for re-wiring or for the introduction of components requiring additional panel space.

The time delay modules are compatible with sockets having both screw and screwless connection formats, and can be used with relays from Finder’s 40, 44, 46, 55, 60 and 62 series, therefore providing the facility for multiple delayed contact combinations from 1 CO to 4 CO with switched current ratings from 7A to 16A at 250V AC or 30VDC.

ON delay and ON pulse functions, four time delay ranges spanning 1.5s to 64 min and a 12 - 24V AC or DC operating voltage mean that fewer models need to be held in stock to cover the whole range of available specifications.

By ensuring that all future introductions of relay socket combinations offer full compatibility with the 86 series, Finder guarantees the user continued maximum flexibility of operation for the widest variety of applications.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/  

New from Finder is a range of 35mm rail mounting sockets featuring screwless terminations. Designed for use with Finder’s 34, 40, 41, 44 and 55 series plug-in relays and 85 series timers, the sockets can be used in any application where power and control wiring is terminated. The sockets will allow panel builders, machine builders, system integrators, OEMs and installers to make a reliable and vibration-resistant connection to the relay or timer in the shortest possible time.

Conventional screw terminals must be tightened to a specified torque during assembly: this process is time-consuming, and it is difficult to ensure that it has been performed correctly. As a consequence, screw connections can work loose under high levels of vibration, either in operation or when being transported. Screwless connections are achieved by means of two metallic blades that are both under tension, which will always force a strong closing action on the wire.

The sockets are all suitable for 35mm rail (EN 50022) mounting and, depending upon type, may also be suitable for panel mounting. The sockets offer the same features and performance as their screw terminal equivalents, allowing the designer the choice of a screwless termination without compromising on other parameters.   Many of the sockets accept Finder’s range of coil indication, EMC suppression and timer modules, and all feature plastic retaining and release clips .

The wide range of relay socket styles that are now available in the screwless format means that the benefits of reduced wiring time and termination reliability can be offered across a large selection of Finder’s relay types and ratings.

These sockets are the result of Finder’s total in-house capability for product design and expertise in advanced manufacturing technology; encompassing the design and manufacture of all precision mould and press tools, automated assembly machinery and test equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

New from Finder is the 46 Series miniature industrial relay range. The 46 Series has evolved from the successful PCB mount 40 Series, and provides both single-pole and two-pole contact configurations for use in control panels and systems. The key characteristic of this new range is its full terminal compatibility with a widely used but single sourced de-facto industry standard. The Faston spade/blade terminals provide secure and reliable connections between the relay and the associated 97 Series socket, over and above that achieved by its predecessor.

Says Finder’s Sales Manager Ted Waller, “This type of relay with spade terminals has been primarily single-sourced until now. The introduction of the 46 Series provides the customer with a real choice, offering a higher current rating than the competing product, and a unique range of optional plug-in modules for greater functionality that is not available elsewhere”

The 46 Series relays are available with either AC or DC coils, and benefit from a host of advanced features and options, including a mechanical flag indicator and manual test button that can be used in momentary or latching mode - useful during commissioning, fault tracing and override situations.  A version with LED indication is also available.

The 46.52 relay has a two-pole changeover (DPDT) configuration and a maximum rated current of 8A, while the single-pole changeover (SPDT) 46.61 model is rated at 16A maximum.

The associated 97 Series rail mounted sockets feature a flip-out retaining and release clip for easy removal of the relay. Uniquely these sockets accept an extensive range of time-delay, coil indication and EMC suppression modules and an 8-way jumper link that reduces the time taken to wire common connections.

As an alternative to using the rail mounting socket the relay can be secured by an optional flange-mount bracket allowing direct mating with Faston connectors.

The terminal arrangement and pitch of the 46 Series are fully compliant with existing relays of this type, and the new relays can be used as a drop-in replacement for industry standard products.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Crydom the leading manufacturer of Solid State Relays (SSR’s) has launched a completely new range of microcontroller based devices. The MCTC is a self contained temperature controller in a single industry standard panel mount package.

The series combines all the necessary functions to accurately regulate temperature. With a simple set up procedure, they provide accurate control for designers for heater and cooling loads of up to 90A AC.

The MCTC requires a non-regulated low drive current DC source (10-32Vdc, 32mA max). The devices have an internally compensated thermocouple input, set to accept J or K types. Five available temperature ranges offering heating control over 37°C to 590°C and an inverse function for refrigeration down to –73°C. Setpoint adjustment is achieved by either low voltage dc or 4-20mA inputs. There is also separate enable/disable input to switch the load.

Integrated zerocross burst firing and proportional derivative control avoids setpoint overshoot. Operators can easily see the controller’s status with separate LED indication for setpoint condition and output status. Load voltage switching can be either 280Vac or 480Vac suitable for both single and three phase systems. Connections are simple screw connections both control and load side. The industry standard package makes it suitable for Crydom’s range of heatsinks.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/