Schaffner’s new IEC inlet EMC filters offer small
form factor, cost effective performance attenuation.

Schaffner, the international leader in the field of electromagnetic compatibility, has extended its range of filtered IEC inlets in response to a strong demand for a wide mounting flange version coming from the Asian market as well as the need to have backward compatible products for older models nearing their end of life. The new larger mounting flange offers an increased conductive area for safety and optimum filter performance.

This enlargement of the FN9222 IEC Inlet filter series meets growing market demand and completes the FN9222 filter series. At the same time the opportunity has been taken to rationalise the whole of Schaffner’s IEC inlet filter range by integrating the functionality of the existing FN321 filter within the current FN 9233 series. The new FN 9222 and FN 9233 IEC Inlet filter families employ the same standardised housing and materials ensuring cost effective filter solutions for Schaffner’s customers.

The new FN 9222U features the new wide mounting flange, is rated up to 15A and has the usual options available such as an on board bleed resistor and a medical version. The FN 9222UZ filter also has the wide mounting flange version and includes a metal oxide varistor (MOV) for surge pulse protection.

The FN9233UF2 completes the extension to Schaffner’s filtered IEC connector range updates. It also features the wide mounting flange and in addition includes two X capacitors, one at line side and one at load side. The Y-capacitors are increased from 2.2nF to 3.3nF. This gives the FN 9233UF2 better high frequency attenuation performance.

The new high performance, small form-factor FN 9222 and FN 9233 products share many common features such as rated currents up to 15A, excellent attenuation performance, optional earth line choke, optional medical versions (B type), snap-in versions (S and S1 type) and hot inlet versions (HI type).

The FN 9233 and FN 9233E IEC inlet filter modules have been developed for systems or switching power supply units that require a high level of interference suppression. Compared with the standard FN 9222 filter family the new FN 9233 series offers higher symmetrical and asymmetrical attenuation performance. The FN 9222E and FN 9233E IEC inlet filters also include an earth line choke, for applications requiring the reduction of interference signals on the earth line.

Paul Dixon, Managing Director of Schaffner comments. ”Our FN 9222 and FN 9233 IEC filter connectors now offer the widest range and best value ever available from Schaffner. Integrating the IEC connector and EMC filter not only offers our customers a reduced component count, it also reduces cost and assists the system designer to gain EMC approvals. The new FN 9233 offers up to 6dB more attenuation than our existing FN 9222 in the same package size. These new IEC filtered connectors provide a safe, high quality mains connection and filter solution.”

The complete range of new FN 9222 and FN 9233 IEC mains inlet filters are available direct from Schaffner and a number of global distribution sources. Typical applications include electrical and electronic equipment, consumer goods, test and measurement equipment, rack mounted systems, electronic data processing and point of sale systems, office automation and Datacomms equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Finder has announced new additions to its 19 Series of 35mm DIN rail module relays, adding override and status monitoring modules to the series.

Building management system (BMS) designers, panel builders and installers will find the new override modules essential for providing a manual override of a BMS controller or programmable logic controller, in an emergency situation or during maintenance.

The ability to manually override automatic systems provides crucial control in an array of situations, control that is typically missing in such systems.  This may include a controller failure, or where maintenance or safety issues must take precedence. 

Typically this can provide control over pumps, fans solenoid valves or motors, where manual intervention is required.

The status modules address a significant drawback of commercial or proprietary controllers; a lack of clear visual signal identification.  The new status module allows BSM and panel designers to set the colour of the status LED during installation, to create a more obvious alert indication.  This enables quick identification of operational status, particularly in complex systems, minimising downtime during fault conditions or routine maintenance.  An analogue output module has also been added to the range, providing a user-defined output between 0 – 10V, for proportional output setting or speed adjustment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Wieland Electric has just launched an addition to its revos FLEX modular hybrid connector system, the RJ45 module.  Revos is a range of industrial multi-pole connectors.  It is also possible to transmit optical signals and connect compressed air hoses – all within a die-cast aluminum housing design.  The RJ45 module comes fully pre-assembled and is able to connect Ethernet cables.

The RJ45’s outer connections are implemented with standard female connectors and the inner section contains two USB connectors of type B, this ensures that improper contact between the internal connectors is avoided.  Revos FLEX has the option of four different frame sizes with two, three, five or seven module slots which can be inserted into the standard aluminum  die-cast housing of revos BASIC in size six through 48.

The module also has 28 different inserts for currents ranging from 1A to 82A and voltages up to 5.5kV which ensures the system can be used in a variety of applications.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Honeywell’s ES110 Series and ES120 Series are a modular range of inflow thermistor-based sensors specifically designed for use in the transportation industry.

Thermistors can be very effective in sensing temperatures of gases, liquids or solids because of their enhanced sensitivity, accuracy and reliability.

The ES110 Series air/gas sensor has an exposed thermistor element that offers enhanced response for greater levels of control, while the ES120 Series is primarily used for immersion temperature measurements. Its fully enclosed brass body makes it often ideal for applications requiring direct contact with liquids.

Robust and easy-to-install threaded packaging often provides reliable operation in harsh application environments. Fast response times over a wide operating temperature range of -40 °C to 150 °C [-40 °F to 302 °F] allow application flexibility.

FEATURES
• Air/gas or immersion sensing
• NTC (Negative Temperature Coefficient) or KTY (siliconbased positive temperature coefficient) type outputs
• Enhanced sensitivity
• Enhanced accuracy
• Enhanced reliability
• Robust packaging
• Fast response
• Wide operating temperature range
• Easy installation
• Customizable

POTENTIAL APPLICATIONS
• Transportation: engine coolant, oil temperature, air intake, fuel and engine block sensing
• Industrial: compressor, duct, hydraulic oil temperature sensing

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The latest addition to Bulgin’s waterproof Ethernet Buccaneer connector system is a new EMI shielded backshell.

While Ethernet Buccaneer is a fully shielded system, the plastic panel connector, PX0833, does not have a natural bond or earth path to a metal chassis. The PX0833/E provides one solution with a short earth lead but there are occasions where complete shielding is required. This new metal backshell, PX0888, fits around the connector to provide a complete 360 degree bond to the panel therefore closing any potential EMI/RFI windows.

Assembly is very straightforward; the screening can fixes to the rear of the panel using the existing connector panel nut and a cover provides continuity between the connector screen and the can.

This simple accessory maintains screening directly to panel so will eliminate any potential EMC issues when using a plastic connector in electrically noisy environments.

Along with the recent introduction of two panel mounting connectors with PCB and IDC terminations this new shielding backshell further expands the uses of this popular IP68 rated Ethernet connector range.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The latest edition of the Arcolectric Catalogue is now available. Catalogue 170 includes full specifications, detailed drawings and photographs for all the current Arcolectric products.

There are many new products included in the new 108 page catalogue:

• 6100 IP67 sealed rocker switches
• 3900 IP67 sealed toggle switches
• 4151 key operated pushbutton
• 0566 6mm miniature indicators
• Slimline LED holders
• IP67 sealed indicators
• IP67 sealed low voltage lampholders
• Maintenance Indicator
• Temperature monitor
• Status monitor
• Mains supply checker single phase
• Mains monitor dual phase
• Mains monitor three phase
• Temperature micro logger
• Compact cooker hood controller

Packed with information for designers, engineers and specifiers, Catalgue 170 is available in printed and CD versions.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

E. Preston Electrical presents the PV2 series of Affordable Inspection Scopes from ProVision.  Featuring advanced electronics and an ergonomic and refined design, the PV2 is the ultimate in efficient yet affordable inspection technology.

ProVision 2-In-1 ScopeSystem

ProVision.pdf

The '2-In-1' Scope System features the flexible, thin ability of our 5.8mm shaft along with an additional 10.6mm 'Obedient' shaft that can be added easily to give you the ability of 2 scopes in one package! Thin and flexible in 5.8 mm configuration and obedient to your desired shape. All you have to do is unscrew the base cap and thread the obedient shaft onto the end of the scope. With-in minutes you have a 'Obedient' ProVision  scope! The '2-In-1' scope system also utilizes the finest in accessories. Featuring a solid threaded design, you can attach a magnet or a 90 degree side view mirror with no fear of falling off.  The '2-In-1' Scope System comes complete with screw-on obedient shaft, threaded mirror, threaded magnet and extra bulb.

Applications:

Mechanics
Cylinders & tops of pistons, intake manifolds, radiators, intercoolers, transmissions, rear axles…If you can't see it, you can't fix it. With ProVision  you can inspect everything from cylinder walls to valve springs, transmissions & rear ends, all without having to disassemble the component.  Saving time and money

Plumbers & Electricians
Ever wonder where that wire came in or where it goes? Or does that water pipe go in front of the beam or behind it… Well, with ProVision  you can get behind the wall or floor & take a look, simply by drilling a small hole.  Plumbers.. what’s blocking that sink…? send your ProVision down to take a look before you strip down the system…..

Military, Police, Customs Inspectors
ProVision is the ultimate search tool in the field.   From your local search and seizure with Police forces and Customs across the world to the military in service with US & UK forces, ProVision  has been a proven performer.  Affordable, easy to use and rugged, ProVision   should be in your vehicle or pack.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog

Schurter’s MSM metal switch series has been extended to include a version with a double pole contact system. The new MSM DP switch is designed with two separate switching contacts. The separate contacts can be used as normally open, normally closed or as change-over. The MSM DP is ideal for potential free momentary switching action of electrical equipment. Furthermore, the switch can be used in applications where an additional second contact is required for a safety circuit. Typical applications are emergency switches where the control loop is switched, and in addition a second circuit for emergency services is activated.

Due to its flat front construction of 1.7 mm, a protection class of IP67 and a high shock resistance, the switch is extremely robust against vandalism. The MSM DP is available in mounting dimensions 19, 22 and 30 mm. The standard type is designed with switching capacities up to 3A / 250 VAC and 5A / 125 VAC respectively. For applications having other switching capacities, alternative variants are available on request. For night applications or where optical status indications are desired, point and ring illuminated versions in different colours are available.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Wieland Electric has completed its selos DIN rail terminal block range with the addition of the WKN 6 TK instrument isolating terminal, a screw-type terminal specially designed for use in secondary circuits of measuring transformers.  

It short-circuits the current transformer for safe disconnection or separation of measuring devices, which prevents both overheating and generation of high voltages in the secondary winding.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The 500 Series is broad portfolio of air/gas, liquid and surface temperature probes that use Honeywell's NTC (Negative Temperature Coefficient) thermistors.

Thermistors can be very effective in sensing temperatures of gases, liquids or solids because of their enhanced sensitivity. These small, easy to install probe assemblies support and position the thermistor elements within the media to be monitored as well as protect the thermistors against damage in use or handling. The assemblies also help direct thermal or fluid flow evenly across the thermistors for accurate temperature sensing.

The enhanced reliability, precision and stability of the 500 Series products allow the customer greater flexibility in temperature monitoring and control. The wide operating
temperature range is -60 °C to 300 °C [-76 °F to 572 °F] provides application flexibility.

The 500 Series is available in a wide variety of housing styles and materials, R-T (Resistance-Temperature) curves, mounting methods, mechanical interface, electrical interface and connector types to meet most applications.

In addition to custom configurations, a variety of existing designs is available.

Honeywell also offers RTD (Resistance Temperature Detector) technology that may be packaged into probe assemblies for similar applications that may require an RTD linear output instead of an NTC thermistor output.

FEATURES
• Air/gas, surface, immersion and liquid level
• NTC type output
• Enhanced sensitivity
• Small package size
• Easy to install
• Enhanced reliability
• Enhanced accuracy
• Enhanced stability/low drift
• Wide operating temperature range
• Wide variety of probe assembly styles
• Custom configurations available
• RTD linear output available

POTENTIAL APPLICATIONS
• Industrial: HVAC, refrigeration, office automation, air compressors, industrial ovens and  ranges, hydraulic systems, processing and packaging, power generation
• Transportation: heavy duty or sport vehicle engine oil, air inlet, fuel, coolant or surface temperature sensing
• Aviation: engine bleed air or environmental control systems
• Weather stations

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/