With the hot power entry module type 1681 SCHURTER expands the range in the upper performance segment of appliance inlet according to the standard IEC 60320. Thus, we cover the full range of the types specified by this standard regarding to rated currents, maximum pin temperatures and protection classes. The inlet also meets the requirements of IEC 60335-1 for household appliances in unattended operation with higher requirements of glow wire test according to IEC 60695-2-11 to 13.

This connector for very hot applications is used in devices that work with high currents and/or increased ambient temperature, for example IT infrastructure, telecommunication equipments or heating appliances.

In 4th quarter 2011 we will also offer the mating IEC connectors to 1681. These are the type 1658 in straight and the type 1659 in angled design.

Technical features:
- Ratings IEC: 16A / 250 VAC
- Ratings UL/CSA: 21A / 250 VAC
- Max. pin temperature: 155 °C
- Terminals: quick connect, solder or screw terminals
- Mounting styles: Snap-in or Screw-on types
- Approvals: IEC 60320, UL 498, CSA C22.2 No.42, IEC 60335-1

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The diversified appliance couplers from SCHURTER are successfully in use throughout the world. This product portfolio has been widened through the series 5001 of panel mounting appliance outlet, specially developed for printed circuit board mounting. Mounting onto PCB’s provides the user with high cost effectiveness.

The series 5001 is available in protection classes I (3 pole) and II (2 pole). The earthing contact (arrangement in protection class I) is provided with an additional terminal for connecting the appliances chassis directly at the power input.

The 5001 housing is made from polyamide PA6 / UL 94V-0. Current carrying parts are made from a copper alloy. The pins are nickel plated and the connections tinned. In the standard arrangement of the 5001, 4 fixing holes are available for mounting. Fixture onto a panel or PCB takes place with screws or rivets.

A special arrangement with snap rivets is also available for PCB mounting.

The 5001 appliance complies with standards IEC60320 / EN 60320 / VDE 0625.

Approvals:
- ENEC 05: 10A / 250 Vac
- cCSAus: 15A / 250 Vac

The 5001 appliance outlet is used for mains extensions and is to be found in applications such as power distributors, household devices, entertainment electronics, office communications, medical technology, industrial electronics and automation.

Technical Features:
- Panel mounting appliance outlets IEC 60320 type F and H
- Rated current range: ENEC 10 A, cCSAus 15 A at 250 VAC

.

Home Page: https://www.epreston.co.uk/epblog/

UP1 Undervoltage Release Switch for Operators Safety

The new UP1 undervoltage switch monitors the supply voltage and actuates a trip release when there is an intense drop in voltage or when the supply voltage is interrupted. As soon as the supply voltage returns in full, the machine or equipment does not automatically restart in an uncontrolled manner, but must be consciously switched on again. Using this function, dangerous situations for operating personnel as well as for the surroundings of the device itself can be prevented.

The UP1 is a 2-pole circuit breaker with additional undervoltage monitoring actuates a trip re-lease with a loss of voltage or an intense voltage drop. The breaker is available with rocker actuation for snap-in mounting or with push-button actuation for both snap-in mounting as well as screw fitting. Protection covers against the ingress of dust and spray water make the use of the breaker in harsh environments such as wood-, masonry- or metal-workings possible.

The requirement for the use of undervoltage protection is in existence for applications such as gardening equipment, gardening shredders, floor cleaning and sanding devices, electrical tools such as circular saws, band saws, grinding machines and drills. Further examples are fuel pumps, coffee-milling devices, fruit juice squeezing machines and fruit juice centrifuges.

The UP1 undervoltage circuit breaker is configured differently in its hardware for various net-work supply voltages und must be therefore ordered for the appropriate supply voltage. Rated switching category is AC-1 16A / AC-3 14.5A @ AC 240 V. The breakers are approved to IEC 60947, UL 508, CSA 22.2 No.14-95 and also contain a horsepower rating.

Technical Characteristics:
- 2-pole switch
- Undervoltage trip release with restart prevention
- Available with rocker or push-button actuation
- Dust and jetting water protection to IP 65
- VDE & cURus approvals for rated currents AC-1 16A / AC-3 14.5A @ AC 240V

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

V-Lock Cord Retaining System

This V-Lock system by Schurter is an attractive and simple solution to prevent an unintentional unplugging. Various different connectors, Power Entry Modules and several country-specific power cables are available with this option.

.

The V-Lock locking system can be used for 10A and 16A power inlets and connectors according to IEC 60320. This system works in such a way that there is a pin in the socket, interlocking with a notch in the plug and thus prevents an unintentional pullout of the power cable. The advantage of this system is that there is no need for a specific socket system or retaining device that has to be adapted and built-in.

The locking is released by pressing on the releasing lever. This lever is easily detected by its bright yellow colour and thus distinguishes this system from existing power cable connections. The extraction force is a minimum of 200 N. Typical applications are in medical appliances,
analysis and laboratory instruments, Telecom and IT- devices, power distribution or radio and TV-studios.

.

USP's: - prevents unintentional disconnection
- increased safety and reliablility
- most cost effective cord retaining solution on market
- attractive design
- easy to use

The following connector types can be manufactured with the V-Lock option in series:
6010, 6061, GSP1, GSP2, DF11, 6600-3, 6600-4, 6610, 4797

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

New feature makes further customization possible

Schurter proudly announces the addition of a colour anodized aluminium housing to the popular line of metal pushbutton switches. The red and green housings can be used to distinguish the start/stop switching functions.

The robust vandal proof switch has an IK07 protection class for high impact and IP67 ingress protection against water and dust. Its low profile flat front construction guards against side impact. The actuator is made of durable stainless steel.

The standard versions of the new MSM color housing are offered in 19 and 22mm mounting diameters with electrical rating of 5A @ 250 VAC. Additionally, custom lettering, other mounting diameters, and colours are available. Versions with switching current and voltage of 100 mA @ 30 VDC, or 10A @ 250 VAC are also available. A version with IP67 rated microswitch provides seal protection from the back. Terminals are quick-connect. Assembly includes pre-wiring of the contact module, which is then snapped onto the actuator housing. Typical applications include controller panels for automated machinery, construction machinery, industrial and medical equipment.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The PSE EX piezo switch from SCHURTER has achieved approval according to ATEX class II 2 G Ex ib IIB T4. This approval enables the switch to be employed in explosive facilities above ground.

The protection class refers to the permissible application in areas where an explosive atmosphere can arise from a mix of air and gases, vapors or mists. The switch may be typically used in oil/gas production systems, in petrochemistry, as well as in paint and varnish mixing facilities. Preparations for extending the approval to include dust-Ex applications are underway. The standard design is available for a mounting diameter of 16mm with pin connections and various housing colors. Additional mounting diameters and connection designs are available
upon request.

The switches for Ex applications are labeled with the type of approval and an identification number. In accordance with the ATEX guidelines, an installation manual is included in the scope of delivery.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter expands its family of EMI-Line Filters for one phase systems with a new and compact high end filter series, called the FMBB NEO. Three variations of 2-stage filter designs allow a specific selection of FMBB NEO filter products for efficient EMI solutions.

The new FMBB NEO Filter series consists of 3 different compact 2-stage filter designs. The 3 filter designs (Design C, Design D and Design F) are characterised by a high symmetrical and asymmetrical attenuation. The FMBB NEO filter Design C attenuates potentially strong conducted interferences. Design D is laid-out for the attenuation of high frequency interferences, whereas the Design F is designed more for low frequency noise attenuation. All designs come up with a high insertion loss performance. The FMBB NEO one phase filter is dimensioned as a 250 VAC filter at a rated current of 1-36 A according IEC and 125/250 VAC, 1-30 A according UL/CSA. The connection to the filter is made by quick connect terminals or with bolts and nuts, style M4. Optional flexible wire leads are available on request.

The compact NEO designed EMI-Filter is intended for use in industrial applications such as frequency converters, stepper motors, UPS-systems, current converters. On request medical versions with leakage currents of < 80μA (M80) respectively < 5μA (M5) are available. The series is ENEC and cURus approved and is qualified for use in equipment according IEC/EN standard 60950.

Technical Features:
- One phase EMI-Line Filter according IEC60939 and UL1283 available in 3 designs (design C/D/F)
- Current ratings: 1-36 A at 250 VAC (ENEC) or 1-30 A at 125/250 VAC (UL/CSA)
- Quick connect terminals / bolt and nut M4 terminals / flexible wire leads optional
- Standard or medical version M5 or M80
- Screw-on chassis mounting from top

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter extends its ECO filtered power entry module for DC applications, series 5003, with a newly added PCB mount version, and version with flexible wires to provide easy installation, cost savings and maximum performance in a lightweight and environmentally friendy compact package. Applications are in data critial environment such as IT, telecom and data encription but also in DC supplied industry automation.

The 5003 features a standard DC connector, offered in two different connector styles. The connector is encased with a 1-stage filter for currents up to 15 A at 125 VDC. The unit mounts to the equipment enclosure with a broad metal flange, thus providing a large contact area for optimal shielding and filter efficiency. The PCB mounting style version is available with optional snap feet to safely fasten the 5003 on the printed circuit board. The flexible wire leads allow an easy, fast and cost saving installation. Screw-on, snap-in and rivet mounting options are offered. The rear mount type with pre-threaded holes, as well as the snap-in, are designed specifically to reduce assembly time and save labor costs.

The series is ENEC and cURus approved and complies with IEC/EN 60950, standard for office and IT equipment. Applications include telecom and IT infrastructure equipment, data encryption machines but any other DC supplied equipment in industry automation.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter's IEC C14 inlet with EMI filter, series 5120 ECO design, meets the increasing demands of IT, medical and industrial appliances. The existing panel mount version is now available with flexible wire leads in addition to quick connect and solder terminals. A PCB mount version is also newly introduced. The new configurations provide easy installation, cost savings and maximum performance in a lightweight and environmentally friendly compact package.

The series combines an IEC C14 or C18 inlet with line filter in various mounting styles. With the addition of the flexible wire and PCB versions SCHURTER has again expanded its range of filtered power entry modules for low and high current applications. The EMI filter is dimensioned as a 1-stage filter for rated currents up to 15 A with a leakage current standard <0.5 mA and medical <5 μA. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding.

Mounting options include screw-on, rivet or snap-in mounting. The snap-in mounting style as well as the screw-on version from rear side with its pre-formed threaded holes reduces labor costs. The PCB mount version is available with optional snap feet to safely fasten the unit on the printed circuit board. The flexible wire leads provides pre-assembly for easy and fast installation.

.

The 5120 is designed for use in IT, medical and industrial applications. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Technical Features:
- Appliance inlet IEC C14 or C18 acc. to 60320 with EMI filter
- Current ratings: up to 10 A at 250 VAC (ENEC/UL/CSA) or 15 A at 125/250 VAC (UL/CSA)
- Screw-on or rivet mounting from front or rear side / Snap-in mounting
- PCB mounting / flexible wire connection / Quick connect terminals / Solder terminals
- Standard or medical version
- Version for enhanced withstand voltage available (X1, Y1)

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter presents its new standard DC filter series FMER SOL suited for use on the DC side of the inverter in photovoltaic systems and other DC systems.

Modern solar inverters, that use MPP (maximum power point) trackers, generate disturbances into both the grid’s AC power line, as well as the DC side of the solar module. An AC filter is normally used on the grid’s AC power line, but the noise generated on the DC side tends to be overlooked.  EMC standards EN 61000-6-3 and EN55014-1, however, also put limits on the noise generated from lines not connected to the grid, such as for example the line to the solar panels. Meeting these limits can be achieved by using a DC filter on the DC side of the inverter.

Large solar inverters installed in electrical installations will generally require a cooling system. Components which provide high temperature resistance simplify the system and reduce the energy needed to cool. The FMER SOL filters are designed for rated currents from 25A to 1500A at 55°C ambient temperature, and voltages up to 1200VDC.  The filters are cURus and ENEC approved up to 75°C ambient temperature, with corresponding reduced rated currents.

The FMER SOL DC filters are designed with screw clamps for types up to 150A and copper bars for types upwards of 250A. Other types of connections, such as wires or copper bars <250A, are available on request.  Small adjustments can also be made to the electrical circuit or to the filter housing on request.

.

.

Technical Data:
- Rated currents: 25A to 1500A at 55°C
- Operating voltage: up to 1200VDC
- Temperature range: -40°C to +100°C

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/