* Very high melting integral (I2t)
* Variants up to 50 A (Pigtail)
* Clip and Pigtail versions
* Excellent price-performance ratio

With the SUT-H, Schurter introduces a new 6.3x32 mm ceramic fuse for single-phase applications for high rated currents from 10 A to 50 A. Thanks to a particularly high melting integral, it is particularly suitable for applications where high inrush currents occur.

The new Schurter SUT-H is technically based on the proven SUT. In contrast to the known fuse, the SUT-H has a much higher melting integral, which makes it particularly pulse resistant. High inrush currents, which occur in power supply units, are easily absorbable.

The fuse is offered for direct mounting on the PCB with pigtails or with a solid beryllium-copper clip (Schurter CQP), which allows an easy replacement of the fuse without soldering. The clip can be up to a rated current of 10 A.

The new 6.3x32 mm SUT-H ceramic fuse opens up completely new areas of application by extending the rated current range up to 50 A and opens completely new areas for innovative applications.

The fuse meets the requirements of the UL 248-14 standard, is cURus approved and RoHS compliant. The SUT-H is developed and manufactured by Chi Lick SCHURTER in China.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* Compact design
* Single-stage filter with high EMI attenuation
* Reduced weight
* Low leakage current versions available

Schurter launches its single-stage filter family FMAC NEO. Especially compact with high performance, the new filter series is ideally suited for use in today's more portable industrial machines, designed to occupy less floor space in manufacturing plants. A wide temperature range extends its capabilities for use in many critical applications.

Three-phase control cabinets, in particular, can have space constraints. SCHURTER addresses this problem with a completely new filter design, which is much more compact than older generations. The new, almost cubed, design makes optimum use of available space in the cabinet housing. Designed with the highest quality components, the filter attenuation remains very high relative to its more compact dimensions.

The new filter family is also suitable for use in devices subjected to high EMC loads such as energy converters or motor drives. Typical applications include converters for photovoltaics, battery storage or charging stations for electric vehicles. These new high-performance type filters are also the better choice for modern day frequency inverters used for motor control.

The FMAC NEO filter series has screw terminals for safe and reliable wire terminations. A full metal flange guarantees a good earth ground connection upon screw mounting to the chassis. The standard versions can be used over a wide temperature range from -40 °C to 100 °C. The filters are designed for currents from 16 A to 230 A at an ambient temperature of 50 °C. They are ENEC and cURus approved and recommended for applications up to 520 VAC. The standard versions are designed for industrial applications with leakage currents <13 mA. Special versions for leakage-critical applications of <3 mA are also available.

The completely redesigned models of the FMAC NEO family are the ideal replacement for all types of Schurter legacy FMAC filters. The FMAC NEO offers the same high performance with significantly smaller dimensions and weight.

Technical Data / Approvals
- 3-phase filter 300 / 520 VAC
- single-stage filter with very high attenuation
- filter available with industrial < 13 mA or low leakage current versions < 3 mA
- rated currents: 16, 25, 36, 50, 64, 80, 110, 180, 230 A (ENEC / UL / CSA) at 50 °C
- operating temperature: -40 °C to 100 °C
- chassis mounting
- screw terminals

Applications
- Industrial equipment, machines
- Motor drive applications
- Machine tools
- Energy inverters (photovoltaic, battery)
- Electro vehicle charging stations

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* Integrated light pipes for status indication
* IDC terminals for quick assembly
* V-Lock cord retention
* Color coding for easy identification in multiphase systems

With the appliance outlets of the 4710-5 series, SCHURTER launches the logical evolutionary step to the successful 4710 – with a clear plus in functionality for status indication.

The new 16 A appliance outlet series 4710-5 offers precisely fitted, integrated guides for light pipes. Up to four light pipes can be used to channel LED light from the circuit board. The feature provides a space and cost saving approach to status indication in PDUs, which are used to signal the equipment technician regarding system status. The operation of the LEDs is freely configurable. To ensure proper application, the light pipes must be ordered as an accessory and should only be inserted into the power distribution unit after the sockets have been mounted and wired.

The use of IDC terminals is particularly efficient. Several outlets can be wired quickly and reliably in a single process step. This highly efficient form of wiring significant reduces assembly time and cost. For individual power supply and status indication, the phase contact is designed as a PCB connection. On request, this terminal can also be offered as quick connect or solder terminal. SCHURTER offers the 4710-5 outlets in black, white and grey for multiphase distinction.

The 4710-5 series is available in two versions: "along" and "cross" to the pin axis. Selection depends on the design of the PDU and the arrangement of the outlets, vertically (along) or horizontally (cross) one behind the other, thereby properly orienting the wires to the direction of the strip. To avoid unintentional power cord disconnection, the new outlets offer the V-Lock cord retention system. The snap-in mounting of the 4710-5 is designed for panel thicknesses of 1.0 to 3.0 mm. Standard versions are available in 1.5 and 2.0 mm.

Technical Data / Approvals
* Appliance outlet Type J (C19) acc. IEC 60320
* IEC/EN 16 A / 250 VAC; 50 Hz
* UL/CSA 20 A / 250 VAC; 60 Hz
* IDC-Terminals for cross sections 10 AWG/6.0 mm2, 12 AWG/4.0 mm2, 2.5 mm2
* Wire arrangement „Cross“ and „Along“ to the outlet contacts
* Snap-in mounting for panel thickness from 1.0 to 3.0 mm
* IP Protection: From front IP 20 acc. IEC 60529
* Insulation protection class I acc. IEC 61140

Application
With its unprecedented functionality and compact design, the new appliance outlet 4710-5 is optimal for intelligent appliances with multiple outlets, such as intelligent PDUs and UPSs used in data centers.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* First-class workmanship (haptics, optics)
* Outstanding tactile feedback
* Homogeneous ring illumination
* Vandal-proof (IP67 and IK07)

Schurter has revised and fine-tuned its MSM Metal Line series with ring lighting, which has been successful for years.

The optimized switches of the MSM family still have the same diameter of 19, 22 and 30 mm. The high-quality housing made of either robust stainless steel or aluminium also remained untouched.

Two things have changed: By cleverly selecting a new material that diffuses the light much more widely, the LEDs used for ring illumination are no longer individually visible. One can now truly speak of homogeneous illumination. Secondly, the ratio of housing diameter to the width of the illumination ring has been redesigned, resulting in a more pleasant, scaled appearance.

What has remained, however, is the robustness of the switches: Due to the high sealing protection and impact resistance values of IP67 and IK07, the switches are particularly suitable for use in devices in harsh environmental conditions or in applications that require protection against vandalism.

Due to the mechanical stroke, also the new MSM versions from Schurter offer unparalleled tactile feedback.

Technical Data / Approvals
- Switching function: momentary
- Supply voltage: 24 VDC
- Switching voltage: max. 250 VAC / 30 VDC
- Switching current: max. 10 A / 100 mA
- Switching power: max. 2500 W / 3 W
- Resistance when open: > 100 MO
- Resistance when closed: < 30 mO / < 50 mO
- Actuation force: 4.5 N
- IK protection: IK07
- IP protection: IP67
- Operating temperature: -25 °C to +85 °C

Applications
- Industrial applications
- Medical devices
- Public vending machines
- Laboratoy instruments
- Building technology
- Maritime applications

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* No tin whiskers, no tin dendrites
* Lead-free coating (RoHS conform)
* Similar fuse qualification as in MIL-PRF 23419
* Hermetically sealed and robust construction

Schurter extends its successful MGA / MGA-S line of 1206 dimension SMD ceramic fuses with an aviation version that is tin whisker free and completely dispenses with leaded coating.

Crystalline tin dendrites and tin whiskers pose a considerable risk of short circuits in highly dense electronics. Dendrites form during the electro-deposition process, whereby heavy marks could appear on the fuse end caps or housing. A thorough inspection and cleaning is required according to MIL-PRF 23419. Tin whiskers form after the electro-deposition process. The cause is not well understood, although adding lead to otherwise pure tin soldering is commonly used as a preventable measure.

However, lead has become an unwanted element according to many environmental initiatives, e.g. RoHS directives. For this reason, Schurter has extended the successful SMD thin-film fuse family MGA with the new –A variant. In addition to the classic MGA and the ESA-certified MGA-S space fuse, the aviation version, MGA-A, uses gold alternatively to lead. Gold plated end caps provide a surface where neither whiskers nor dendrites can form. This makes the new MGA-A a safe solution for use in not only highly sensitive electronics in the aviation industry but often suffices for use in the industrial grade space sector.

The technical design is similar to that of the ESA-certified MGA-S. This means: hermetically sealed, ultra-robust construction, which is ideally suited for use in intrinsically safe applications according to ATEX and IECEx requirements. Despite its very small footprint (1206), the MGA-A has a particularly high breaking capacity of up to 300 A at 125 VDC and can be used in a wide temperature range of -55 °C to +125 °C.

The new MGA-A from Schurter is suitable for all applications where the highest demands are placed on reliability and availability.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* Very compact design
* Various mounting options
* Variants with ground choke
* V-Lock cord retention
* Fuseholder meets latest IEC standard#

Schurter extends its successful power entry module series DD12 with new variants for screw and snap mounting. New versions are also available with additional ground choke for suppressing high-frequency interference on the ground conductor. The DD12 with fuse holder, switch and filter offers remarkable functionality in a very compact housing.

The DD12 filter series combines an IEC C14 appliance plug with a 1- or 2-pole fuse holder, a 1- or 2-pole switch and a high-quality mains filter. The particularly wide metal flange (horizontal or vertical) make contact with the housing surface over a large area and thus enables an optimum filter and shielding effect.

Ground Choke
The DD12 series is now available with a ground choke. In addition to the current-compensated choke on the pole and neutral conductor, the line filters have a second choke on the earth conductor. The ground choke is located between the device plug and the filter output. Placing the filter directly at the mains input ensures that possible high-frequency interference currents on the earth conductor cannot bypass the filter via the housing. The versions with medical filters (no Y capacitors) especially benefit from improved asymmetrical attenuation in the higher frequency range due to the earth line choke.

Applications
The DD12 series is available with standard or medical filter. It is suitable for use in devices that require a particularly high immunity to interference. These include IT or telecom systems according to IEC 90650-1 and medical devices according to IEC 60601-1.

The series meets the new fuseholder requirements outlined in IEC 60127-6 for enhanced fire safety and is also suitable for use in home appliances according to IEC 60335-1. It is compatible with V-Lock retaining cordsets.  The DD12 series is certified for currents up to 10 A/250 VAC according to IEC standard and 8 A according to UL/CSA standard at 125/250 VAC. It is ENEC and cURus approved.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* Elevated IP protection from IP40 up to IP67
* Recessed rocker prevents accidental manipulation
* Wide range of mounting options
* V-Lock cord retention

With the DG11, Schurter launches a variably mountable IEC appliance inlet with integrated device protection switch TA35 for a variety of applications requiring, among other things, increased IP protection.

The DG11 represents a logical evolution of the proven and widely used Schurter 6135 power entry module. It combines the advantages of the already introduced DF11 with a particularly compact design.

Wide Range of Mounting Options
The new DG11 is available for almost every mounting variant with snap or screw mounting. The latter can be done in front mount or rear mount version. In addition, holes for the screws are available in either a vertical or horizontal arrangement.

TA35: Wide Assortment
The DG11 includes a 2 pole TA35 circuit breaker which provides the function of a device switch as well as thermal overcurrent protection. The thermal overprotection can be done with bimetal mechanism for only one or two poles and is available in finely graduated rated currents from 0.05 A to   16 A. The rocker switch is available illuminated or unilluminated in a variety of colors and markings.

IP Protection
In addition to the IP40 protection in all versions, the DG11 is available in a version with IP67 opposite the device. The use of the device in harsh dust or splash water environments is ensured by a protective cover for the circuit breaker as well as sealing beads and four sealing screws for tight fastening of the base.

Cord Retention
The V-Lock cord retention system can be plugged in to IEC 60320 at 10 A and 16 A. With the V-Lock system the power connector is equipped with a latch that interlocks with a special notch in the inlet and thus reliably prevents the cord from being pulled out.

Technical Data / Approvals
* Ratings IEC/CCC 10 A / 250 VAC; 50 Hz
* Ratings UL/CSA 15 A / 250 VAC; 60 Hz
* Dielectric Strength
> 2.5 kVAC between L-N (1 min/50 Hz)
> 3 kVAC between L/N-PE (1 min/50 Hz)
* Allowable Operating Temperature: -25 °C to 60 °C
* Suitable for appliances with the protection class I or II acc. IEC 61140
* Terminals: Quick Connect 6.3 x 0.8 mm
* IP Protection from front: IP40 or IP67 acc. IEC 60529
* Snap in mount for panel thickness from 1.0 up to 3.0 mm
* Screw on mounting for IP40 variants excludes screws and nuts (recommended torque 0.25 Nm)
* Screw on mounting for IP67 variants include sealing special screws. Screw nuts are not included (recommended torque 0.25 Nm)

Applications
Witch thempact form factor and the broad functionality, the DG11 is ideal various industrial appliances. Specially well suited are appliances for medical or laboratory use, such as shaking water baths ultrasonic cleaners, overhead stirrers and many more. Here the variant with IP67 is specially well suited, as it can cope with sterile environments.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

More and more devices on the power grid must function smoothly without interfering with each other. Not so easy, since switching power supplies and highly clocked integrated circuits are used in almost all electronic devices. EMC filters can help here. Where necessary in multi-stage design.

In practice, it is quite possible that the attenuation is not yet sufficient despite the use of a filter. In such cases, several filter stages optimized for the specific interference signals are then connected in series. Which in interaction significantly improve attenuation in both differential and common-mode interference. Usually you get very good results with a doublestage filter. However, triple-stage filters are also conceivable, feasible and available.

Click Link Below for Application Notes:

Two Are Better Than One

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

C20F IEC appliance filter with V-Lock cord retention and enhanced glow wire resistance as standard features.

The IEC appliance filter series C20F in the mounting version screw front side are now equipped as standard with the V-Lock cord retention feature and are made of new material, whereby the components meet the increased glow wire tests according to IEC 60127-6 Edition 2 and IEC 60335-1 for appliances in unattended use.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* 10.1“ PCAP Touchscreen with controller
* Multi-touch capability (10 fingers)
* Protected against moisture and EMI
* Incl. software and stylus pen

With the Engineering TouchKit, Schurter launches a professional tool in the form of a PCAP touchscreen for development engineers to experience the advantages of the projected-capacitive technology up close.

Schurter is a well-known, leading manufacturer of electronic components. In addition, Schurter also has the Input Systems division. Input Systems offers complete touchscreen solutions including displays, housings and electronics. Schurter has a wide range of industrial displays and standard touchscreens for HMI integration and can also manufacture its own, customer-specific PCAP sensors. The Engineering TouchKit is introduced to bring touchscreen capabilities closer to a wider audience.

Engineering TouchKit
The Schurter Engineering TouchKit contains a plug-and-play 10.1" PCAP touchscreen sensor with a SCHURTER controller based on an EETI chip. With the supplied software on the USB stick, the controller data can be analyzed and evaluated. This enables the development engineer to set up and perform tests with and without active stylus and to experience the extensive range of functions of the touchscreen.
The complete Schurter TouchKit gives the engineer the opportunity to familiarize himself with the latest projected capacitive touchscreen technology (PCAP).

Special Features
* The Engineering TouchKit is multi-touch capable: It detects the operation of up to 10 fingers simultaneously.
* Can be operated with a pen: The scope of delivery also includes a touchscreen stylus, which offers high accuracy and pressure measurement.
* Resistance to moisture: The touchscreen can be wet without detecting a wrong touch. The touch screen will continue to function at low humidity. The controller switches off the sensor in the event of large quantities of water.
* Palm rejection: The palm touch of the touch screen is not recognized as an operation or input.
* EMC resistance: If the touch controller has been correctly installed, it is immune to interference voltages in the form of wave fields up to 10 V/m or wired up to 10 Vrms.

Technical Data
- Touch Sensor: 10.1“ PCAP Touch Sensor
- Touch Functions: up to 10 fingers simultaneously
- Controller: EETI EX3146
- Supported interfaces: USB, I2C on request
- Power supply: USB Port
- Operating temperature: -40 °C to +85 °C

Applications
- Industrial applications
- Vending or ticket machines
- Food sector
- Laboratory equipment
- Data & Communication

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/