Schurter improves upon a classic product: the new 4797-5 series IEC outlets are available with integrated Light Pipes. An intelligent, space and cost-saving solution for PDUs used in data centers and other multi-distributed power applications.

- Integrated Light Pipes for Status Indication
- Cord retention

The human need for information continues to expand at record pace, while continual advancements in information and communications technology (ICT), strive to keep pace with this demand. New data centers continually appear in the most unconventional of places to support this growing demand. These data centers are under constant pressure to improve upon efficiency and reliability under growing regulatory requirements to reduce energy use and cost. Meanwhile, the demand for reliable transmission with increased speed must keep pace. At the base of this modern day economic demand and supply phenomena is an intelligent, reliable power supply and – at the base of that – a simple connector. Schurter is pleased to introduce its IEC outlets with integrated Light Pipes, which bring a simple yet improved solution to intelligent power distribution

Freely Configurable Status Indication
Today, PDUs often use LEDs mounted in between outlets to display a current status. The high packing density of servers in modern data centers demands the same of power distribution units. With Schurter's appliance outlet, the integrated Light Pipes provide space and assembly cost savings over conventional strip designs. Service technicians are able to clearly see which systems are working properly, or respond to required maintenance adjustments. The triggering of the LEDs is freely configurable, wherein each state can be clearly and independently represented. An outlet could, for example, signal an outage with a red LED, or a critical power consumption pattern with a yellow LED.

Optionally the Schurter 4797-5 is available with up to four Light Pipes.

Cord Retention
In order to prevent against unintentional removal of a power cord, the new sockets offer a pull-out safety device. Depending on the arrangement of the sockets in the bar – horizontally or vertically – the Schurter V-Lock or other cord retention systems with side latches can be used. Both systems are usable with the 4797-5 outlets.

The snap-in bracket is designed for front panel mount and can fit a panel thickness 1.5 mm. Optionally variants from 1.0 to 3.0 mm are also available.

Technical Data / Approvals
- Ratings IEC/CCC 10 A / 250 VAC; 50 Hz
- Ratings UL/CSA 15 A / 250 VAC; 60 Hz
- Dielectric Strength > 1.5 kVAC between L-N    (1 min/50 Hz)
................................... > 3 kVAC between L/N-PE  (1 min/50 Hz)
- Allowable Operating Temperature: -25 °C to 70 °C (Pin Temperature)
- IP Protection from front: IP 20 acc. IEC 60529
- Suitable for appliances with the protection class I acc. IEC 61140
- Snap in mount for panel thickness 1.0, 1.2, 1.5, 1.7, 2.0, 2.5 or 3.0 mm
- PCB Terminal 2.8 x 0.8 mm

Applications
With its unprecedented functionality and compact design, the new appliance outlet 4797-5 is optimal for intelligent appliances with multiple outlets, such as intelligent PDUs and UPSs used in data centers.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter is launching its series 6610-5, the logical next step from the successful 6610 series; a new level of functionality is added to the industry’s original outlet popularly known for the highest level of efficiency during assembly.

- Integrated light pipes for status indication
- IDC Terminals
- V-Lock cord retention

The new 10 A-appliance outlet, series 6610-5, offers integrated guides for light pipes. It features up to two light pipes, intended to channel light from LEDs placed on a printed circuit board to the outlet surface. Technicians are able to clearly see which systems are working properly, or respond to required maintenance adjustments. The controls of the LEDs are freely configurable, wherein each state can be represented clearly and independently. To avoid damage and to make the wiring easier, the light pipes

can be inserted after the installation and need to be ordered separately of the sockets in the PDU.

The use of IDC connectors is particularly efficient. Multiple sockets can be wired quickly in a single step. This highly efficient way of wiring saves considerable time and thus labor costs. The phase contact is available with an optional PCB, quick connect or solder terminal for an independent line supply and status indication. To ensure an even better optical feedback, SCHURTER provides the individual outlets in black, white and grey.

The 6610-5 series is available in two arrangement versions, so called "along" and "cross". Depending on the application and type of PDU, mounting several sockets vertically (cross) or horizontally (along) one behind the other can be achieved. The IDC terminals are then oriented accordingly for insulation displacement of the wires.

The new 6610-5 series offers a pull-out safety feature to prevent against unintentional removal of the power cord. Depending on the arrangement of the outlets in the strip – along or cross – the Schurter V-Lock or cord retention systems with side latches can be used. The snap-in mounting of the 6610-5 is designed for plate thicknesses from 0.8 to 3.0 mm. Additional versions to be launched in the near future will include 16 A appliance outlets.

Technical Data / Approvals
- Ratings IEC/CCC 10 A / 250 VAC; 50 Hz
- Ratings UL/CSA 15 A / 250 VAC; 60 Hz
- Dielectric Strength > 1.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz)
- Allowable Operating Temperature. -25 °C to 70 °C (Pin Temperature)
- IP Protection: from front IP 20 acc. IEC 60529
- Insulation Cover: Suitable for appliances with protection class I acc. IEC 61140
- Terminal: IDC -Terminal
- Panel Thickness: Snap in from 0.8 mm to 3 mm
- Material housing: Thermoplastic, black, white and grey, Frianyl B3 V0

Applications
With its unprecedented functionality and compact design, the new appliance outlet 6610-5 is optimal for intelligent appliances with multiple outlets, such as intelligent PDUs and UPSs used in data centers.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The New and Inexpensive 2.5 A Appliance Inlet of the Type 2570 in Diverse Variants

The appliance inlet series of the type 2570 by SCHURTER provides diverse mounting variants and terminal options. Because of its cost effective design and the wide range of approval certificates for Europe, America and Asia, is the C8 inlet best suited for both industrial and consumer appliances.

The appliance connector for snap-in mounting is available with solder-, quick connect- or PCB-terminals. The PCB-terminals in combination with the sandwich mount are specially for the application on printed circuit boards. This way the board can be fully equipped and tested before being mounted. The mounting is done by introducing the connector into the back wall, and placing the appliance housing into the groove on the inlet.

Thanks to the use of rolled contact pins, the variants with solder or PCB terminals are very inexpensive and therefore suitable for consumer goods. Nevertheless do they comply with all the security requirements and are approved by all the relevant international standards.

Technical Data / Approvals
*  Ratings IEC/CCC 2.5 A / 250 VAC; 50 Hz
*  Ratings UL/CSA 2.5 A / 250 VAC; 60 Hz
7 A / 125 VAC; 60 Hz
*  Operating Temperature from -25 °C to 70 °C
*  Variants for Sandwich- or Snap-in Mounting
*  Solder-, Quick Connect- or PCB- Terminals

Application
With the complete approvals for Europe, America and China, as well as the low sales price, the 2570 Series can be sold to all industries. The Variants are applicable in medical-, audio- and industrial equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

IP68/IP69 rated; 10A – 400V AC/DC; 80% quicker to install; 14mm diameter

Hylec-APL, the specialist supplier of electrical components and enclosures, announces the launch of the new TeePlug® TH381 plug and socket electrical micro connector designed for underwater use and harsh environment installations.  Offering the highest levels of reliability, TeePlug TH381 Series connectors provide complete protection against the effects of permanent submersion in water to ensure electrical connection, even when subjected to high pressure water jets.  The IP68/IP69K rated TeeTubeTH381 models also prevent dust and dirt ingress.  Measuring only 14mm in diameter, the TeeTubeTH381 Series suits outdoor lighting applications, such as architectural lighting, street lighting, underwater lighting, illumination of road signs and billboards and the connection of interior and exterior Class 2 electrical devices.

TeePlug TH381 connectors feature a push-pull design that installs up to 80% faster than competitive waterproof connectors, saving valuable time on-site and reducing cost.   Intuitive and functional in use, TeePlug TH381 connectors incorporate a special coupling system that confirms correct alignment and mating with an audible click and also prevents accidental disconnection, even against opposing forces of 25kg (8Kg according to EN61535).  Models with an additional optional safety system are available to further protect against disconnection by requiring the use of a tool such as a flat-blade screwdriver for uncoupling.   TeePlug TH381’s IP68 water resistance rating is guaranteed even when subjected to bending forces of up to 5Kg, and they are resistant to high pressure water jets up to 100Br, 16l/min at a water temperature of 80degC.   Vibration and external mechanical stresses are no problem either, as cable traction is prevented up to a force of 8Kg.

Electrical specification is 2-poles, 10A – 400V AC/DC.  Wire section is 0.25mm² to 1.5mm² without ferrules.  TeePlug TH381 Series plugs and sockets are available in two variants, cable to cable and panel-mount, and in two sizes to suit cable diameters between 5.8mm and 6.9mm and 7.0mm – 8.0mm. Cable reduction grommets are available for smaller cables, as are additional accessories, including sealing caps, a dedicated spanner for quick, safe installation, a bigger cable gland for larger cables and a rear nut for panel-mounted installations.

Building on the heritage of the proven TeePlug range, the new TeePlug Series TH381 is the optimum electrical connector for all submerged and challenging installations.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Wieland Electric Inc., a leading global manufacturer of innovative electrical interconnect technology, has expanded its portfolio of revos rectangular connectors with the new revos IT Series split housing data cable feed-through connectors, which enable up to four pre-terminated data cables to be safely routed through a control cabinet or enclosure wall.

The revos IT Series data cable feed-through connectors accommodate cables with diameters spanning 4mm to 9mm, and are rated for IP65 environmental protection against dust and water ingress. In addition, the connector’s design incorporates a strain-relief feature to further enhance the robustness of the connection.

“More networked and automated machines on factory floors mean more specialized, pre-terminated cables, all of which need to be safely and conveniently routed through control cabinet or enclosure walls,” said Martin Lalonde, application engineer at Wieland Electric. “The revos IT Series’ split housing is ideally suited for passing preassembled cables - like encoder, data, and other unique cables - while maintaining the quality and signal integrity of the OEM cabling, and providing the convenience and robustness of industrial rectangular connectors.”

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The range of TeeTube connectors from Hylec provide a completely water-tight seal to IP68 at up to 5 bar.  In addition to being exceptionally hardwearing and robust, TeeTubes have a unique space-saving design.

The terminal block with secure sealing forms part of the external housing and can be directly screwed to the connector’s entry points, so no secondary housing is required.   The range is very comprehensive and includes straight through, T splitter and Y splitter models for 2 and 3 cable entry in a variety of sizes. There are also dual terminal versions available for easy fitting and looping of conductors (2+2 and 3+3 pole).

Standard Series TTK20 TeeTubes have a diameter of 26.5mm for cables of between 5mm and 13 mm and suit 32A max current.  For really tight spaces, there are Micro TeeTubes which are a mere 23mm in diameter, while larger cables between 8mm and 17mm diameter can be accommodated in the slightly larger 32mm diameter TTK25 Series.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec offers the UK’s first 100% tool-less in-line junction box, Debox SL.   Debox SL can be assembled in a few seconds and is supplied complete with a 16A, UL and VDE-approved, 4-pole screw-less push wire terminal block, Debox 2 SL joins flat or round profile cable and includes everything to save electricians on-site installation time and reduce costs.

No tools are required: after inserting the cables and closing the included cable clamps, the lid is simply snapped shut and held with the supplied locking clip. This innovative cable junction box from Hylec-APL is IP20 protected, flame retardant to UL94V-0, and suits internal applications, including ring main lighting, LED lighting and power.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

10 A IEC Appliance Outlet Type F with integrated light pipes and V-Lock cord retention for smart PDUs

Schhurter improves upon a classic product: the new 6600-5 series IEC outlets are available with integrated light pipes. An intelligent, space and cost-saving solution for PDUs used in data
centers and other multi-distributed power applications.

The human need for information continues to expand at record pace, while continual advancements in information and communications technology (ICT), strive to keep pace with this demand. New data centers continually appear in the most unconventional of places to support this growing demand. These data centers are under constant pressure to improve upon efficiency and reliability under growing regulatory requirements to reduce energy use and cost. Meanwhile, the demand for reliable transmission with increased speed must keep pace. At the base of this modern day economic demand and supply phenomena is an intelligent, reliable power supply and – at the base of that – a simple connector. Schurter is pleased to introduce its IEC outlets with integrated light pipes, which bring a simple yet improved solution to intelligent power distribution.

Today, PDUs often use LEDs mounted in between outlets to display a current status. The high packing density of servers in modern data centers demands the same of power distribution units. With Schurter’s appliance outlet, the integrated light pipes provide space and assembly cost savings over conventional strip designs. Service technicians are able to clearly see which systems are working properly, or respond to required maintenance adjustments. The triggering of the LEDs is freely configurable, wherein each state can be clearly and independently represented. An outlet could, for example, signal an outage with a red LED, or a critical power consumption pattern with a yellow LED.

Optionally the SCHURTER 6600-5 is also available with only one or without light pipe.

In order to prevent against unintentional removal of a power cord, the new sockets offer a pull-out safety device. Depending on the arrangement of the sockets in the bar (horizontally or vertically) the Schurter V-Lock or other cord retention systems with side latches can be used. Both systems are possible with outlets the 6600-5.

The outlet’s snap arms are currently designed for front panel dimensions of 1.7 or 2.0 mm. Versions for 1.0, 1.5 and 2.5 mm will follow shortly.  A 16 A version of the device socket with up to 4 light pipes will be launched in the near future as well.

Technical Data / Approvals
• Ratings IEC 10 A / 250 VAC; 50 Hz
• Ratings UL/CSA 15 A / 250 VAC; 60 Hz
• With one, two or without integrated light pipes for status display
• Compatible for V-Lock cord retention and other systems with side latches
• Operation temperature -25 °C bis 70 °C
• Snap-in mounting and PCB terminals

Application
Typical applications are in smart Power Distribution Units (PDU) used in Data Centers, IT- & Telecom systems, where the power or other status indication per each outlet is monitored.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Designed to decrease downtime and increase production efficiency, the M-Series provides reliable and uncompromised data, signal and power transmissions for industrial automation systems in harsh environments.

Featuring an M-style threaded locking nut, Bulgin’s M-Series offers an extensive choice of robust industry standard interconnect solutions for automation and control applications including: M5, M8, M12, M16 and M23 variants.

With A, B & D Coded connector variants available throughout the range, Bulgin’s automation connectors are ideal for ensuring consistent and reliable actuator/sensor, fieldbus and Ethernet connections.

This IP67 rated connector range includes field installable connectors, receptacles and overmolded cable variants with PVC/PUR jackets. EMI shielded options are also available in addition to plastic or metal housing materials that come in straight and right angle forms.

Passive distributor boxes with M12/M8 actuator and sensor sockets are also available to reduce installation time in the field whilst maintaining a high degree of protection with an IP67 sealed housing.

Benefits:
- Reliable, robust and versatile connectivity solutions
- Shielded variants maintain signal integrity
- Environmental protection up to the IP67 standard
- Quick and secure screw coupling mechanism
- Wide variety of body styles and coding options

 Key Applications:
- Robotics
- Process Measurement & Instrumentation
- Automotive Manufacturing
- Food & Beverage
- Machinery & Tooling
- Process Control Systems
- Packaging Equipment
- Material Handling Equipment

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter expands its wide range of power entry modules to include versions, without ground pin, for use in Protection Class II double-insulated applications. The 5145 power entry module is already popular for use in Protection Class I equipment, due to its circuit breaker and EMC filter functions integrated into one compact package. The new Protection Class II version is perfectly suited for medical equipment used at home where the medical standard prescribes the use of Protection Class II design.

The new 5145 Class II version is according to IEC 60320-1, style C18. It is particularly well suited for use in medical equipment according to the IEC standard 60601-1-11, which outlines additional safety measures specific to medical equipment intended for use in the home. There is increasing demand for such equipment as populations around the world age and healthcare costs continue to rise.

Protection Class II equipment, in contrast to Protection Class I equipment, generally has no metal case. This category of equipment is called double insulated, and requires higher safety levels for energized components relative to exposed surfaces. The 5145 Class II power entry module provides double insulation between energized components and exposed parts. This reinforced insulation is tested with a voltage of 4000 VDC between the energized conductor (L) and the neutral conductor (N) relative to the filter case.

The EMC filter is available in medical and low leakage, M5, versions. This integrated filter at the power input provides highly effective interference suppression, which results in optimized electromagnetic compatibility. Current ratings range from 1-10 A at 250 VAC. Versions with quick-connect or solder terminals are available.

The 5145 Class I and Class II are ENEC and cURus approved. They are suited for use in equipment according to IEC 60950, IEC 60601-1, in addition to IEC 60601-1-11.

Technical Data / Approvals
- IEC C18 power-inlet connector with TA45 circuit breaker and a filter
- M5 medical filter
- Rated currents: 1, 2, 4, 6, 10A (ENEC), 1, 2, 4, 6, 10, 15A (UL/CSA) at 40°C
- Screw mounting

Application
- For totally insulated equipment according to IEC 61140
- Suited for medical equipment according to IEC 60601-1
- Especially suited for use in medical equipment intended for use in the home according to IEC 60601-1-11

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/