Schaffner’s new IEC inlet EMC filters offer small
form factor, cost effective performance attenuation.

Schaffner, the international leader in the field of electromagnetic compatibility, has extended its range of filtered IEC inlets in response to a strong demand for a wide mounting flange version coming from the Asian market as well as the need to have backward compatible products for older models nearing their end of life. The new larger mounting flange offers an increased conductive area for safety and optimum filter performance.

This enlargement of the FN9222 IEC Inlet filter series meets growing market demand and completes the FN9222 filter series. At the same time the opportunity has been taken to rationalise the whole of Schaffner’s IEC inlet filter range by integrating the functionality of the existing FN321 filter within the current FN 9233 series. The new FN 9222 and FN 9233 IEC Inlet filter families employ the same standardised housing and materials ensuring cost effective filter solutions for Schaffner’s customers.

The new FN 9222U features the new wide mounting flange, is rated up to 15A and has the usual options available such as an on board bleed resistor and a medical version. The FN 9222UZ filter also has the wide mounting flange version and includes a metal oxide varistor (MOV) for surge pulse protection.

The FN9233UF2 completes the extension to Schaffner’s filtered IEC connector range updates. It also features the wide mounting flange and in addition includes two X capacitors, one at line side and one at load side. The Y-capacitors are increased from 2.2nF to 3.3nF. This gives the FN 9233UF2 better high frequency attenuation performance.

The new high performance, small form-factor FN 9222 and FN 9233 products share many common features such as rated currents up to 15A, excellent attenuation performance, optional earth line choke, optional medical versions (B type), snap-in versions (S and S1 type) and hot inlet versions (HI type).

The FN 9233 and FN 9233E IEC inlet filter modules have been developed for systems or switching power supply units that require a high level of interference suppression. Compared with the standard FN 9222 filter family the new FN 9233 series offers higher symmetrical and asymmetrical attenuation performance. The FN 9222E and FN 9233E IEC inlet filters also include an earth line choke, for applications requiring the reduction of interference signals on the earth line.

Paul Dixon, Managing Director of Schaffner comments. ”Our FN 9222 and FN 9233 IEC filter connectors now offer the widest range and best value ever available from Schaffner. Integrating the IEC connector and EMC filter not only offers our customers a reduced component count, it also reduces cost and assists the system designer to gain EMC approvals. The new FN 9233 offers up to 6dB more attenuation than our existing FN 9222 in the same package size. These new IEC filtered connectors provide a safe, high quality mains connection and filter solution.”

The complete range of new FN 9222 and FN 9233 IEC mains inlet filters are available direct from Schaffner and a number of global distribution sources. Typical applications include electrical and electronic equipment, consumer goods, test and measurement equipment, rack mounted systems, electronic data processing and point of sale systems, office automation and Datacomms equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Finder has announced new additions to its 19 Series of 35mm DIN rail module relays, adding override and status monitoring modules to the series.

Building management system (BMS) designers, panel builders and installers will find the new override modules essential for providing a manual override of a BMS controller or programmable logic controller, in an emergency situation or during maintenance.

The ability to manually override automatic systems provides crucial control in an array of situations, control that is typically missing in such systems.  This may include a controller failure, or where maintenance or safety issues must take precedence. 

Typically this can provide control over pumps, fans solenoid valves or motors, where manual intervention is required.

The status modules address a significant drawback of commercial or proprietary controllers; a lack of clear visual signal identification.  The new status module allows BSM and panel designers to set the colour of the status LED during installation, to create a more obvious alert indication.  This enables quick identification of operational status, particularly in complex systems, minimising downtime during fault conditions or routine maintenance.  An analogue output module has also been added to the range, providing a user-defined output between 0 – 10V, for proportional output setting or speed adjustment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Wieland Electric has just launched an addition to its revos FLEX modular hybrid connector system, the RJ45 module.  Revos is a range of industrial multi-pole connectors.  It is also possible to transmit optical signals and connect compressed air hoses – all within a die-cast aluminum housing design.  The RJ45 module comes fully pre-assembled and is able to connect Ethernet cables.

The RJ45’s outer connections are implemented with standard female connectors and the inner section contains two USB connectors of type B, this ensures that improper contact between the internal connectors is avoided.  Revos FLEX has the option of four different frame sizes with two, three, five or seven module slots which can be inserted into the standard aluminum  die-cast housing of revos BASIC in size six through 48.

The module also has 28 different inserts for currents ranging from 1A to 82A and voltages up to 5.5kV which ensures the system can be used in a variety of applications.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The latest addition to Bulgin’s waterproof Ethernet Buccaneer connector system is a new EMI shielded backshell.

While Ethernet Buccaneer is a fully shielded system, the plastic panel connector, PX0833, does not have a natural bond or earth path to a metal chassis. The PX0833/E provides one solution with a short earth lead but there are occasions where complete shielding is required. This new metal backshell, PX0888, fits around the connector to provide a complete 360 degree bond to the panel therefore closing any potential EMI/RFI windows.

Assembly is very straightforward; the screening can fixes to the rear of the panel using the existing connector panel nut and a cover provides continuity between the connector screen and the can.

This simple accessory maintains screening directly to panel so will eliminate any potential EMC issues when using a plastic connector in electrically noisy environments.

Along with the recent introduction of two panel mounting connectors with PCB and IDC terminations this new shielding backshell further expands the uses of this popular IP68 rated Ethernet connector range.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The latest edition of the Arcolectric Catalogue is now available. Catalogue 170 includes full specifications, detailed drawings and photographs for all the current Arcolectric products.

There are many new products included in the new 108 page catalogue:

• 6100 IP67 sealed rocker switches
• 3900 IP67 sealed toggle switches
• 4151 key operated pushbutton
• 0566 6mm miniature indicators
• Slimline LED holders
• IP67 sealed indicators
• IP67 sealed low voltage lampholders
• Maintenance Indicator
• Temperature monitor
• Status monitor
• Mains supply checker single phase
• Mains monitor dual phase
• Mains monitor three phase
• Temperature micro logger
• Compact cooker hood controller

Packed with information for designers, engineers and specifiers, Catalgue 170 is available in printed and CD versions.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The new and first of its kind power entry module, Schurter series 5707, advances the range of applications in the area of detachable power. It offers an alternative to makeshift accessories often used to prevent particles or liquids from entering into the appliance. The new power entry module is resistant to dirt, dust and other fine particles, as well as sprays, splashes and jets of non-aggressive liquids. It is ideal for use in electronic equipment exposed to leaks, drips and spills, as well as equipment subject to routine washing or disinfecting.

The inlet portion of the 5707 is according to IEC 60320-1, style C14 or C18. It is combined with a 1-or 2-pole fuse holder and a standard or medical EMC filter rated up to 8 Amps at 250 VAC. The complete unit is rated IP65 with seal protection at the panel opening, around the fuse holders and between the inlet and connector pins. The seal at the panel opening is achieved with a rubber lining, which is fixed into a groove around the metal flange. Front or rear mount versions are available. Special screws guarantee the sealing at the mounting holes.  The fuse holders are independent of each other and accept 5x20 mm fuses. Screw caps with o-rings are used to provide a seal between the cap and holder. A tool is required to remove the cap from the holder to replace the fuse, which is required for medical equipment.

The 5707 offers pre-wired electrical connections, using 6.3x0.8 quick connect terminals. The series is approved according to ENEC, UL & CSA. Versions for protection class I or II are available, as well as a version with special class I capacitors for increased voltage withstand. The module is according to medical standards IEC/UL 60601-1 and is ideally suited for use in medical applications such as diagnostic, dialysis and infusion devices, as well as commercial appliances such as drink dispensing equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

This latest addition to Bulgin's Data Buccaneer range of dust and waterproof connectors is a new Mini USB 'AB' style interface in three panel mounted configurations.

These three new 'AB' versions offer a choice of panel mounting. The first, PX0456, is front of panel mounting with a flying lead to the rear, terminated with a 6 way 0.1” crimp connector.

The other two are rear of panel mounted; the PX0457 has a flying lead terminated with 6 way PCB header and the PX0458 has straight PC pins for direct soldering to a PCB. Both of these allow the connector to be soldered to a PCB sub-assembly and tested as part of the assembly before final build.

Being compatible with both mini 'A' and mini 'B' style interfaces this new 5 pole product allows the true functionality of this 'plug and play' interface.

As with others in the Buccaneer range, the mini USB connector is dust and waterproof to IP68, when mated, and provides USB V2.0 performance up to 480Mbs.

The matching pre-wired cable connectors, PX0441 and PX0442, are available in 2, 3 and 4.5m lengths with a sealed Mini 'B' type USB connector paired with either standard or miniature 'A' type USB connector. The diameter over the coupling ring is just 19mm and the screw coupling provides a secure, proven locking system.

Mini USB Buccaneer finds many applications within smaller peripherals or where panel space is at a premium and, as with all Bulgin products, is fully RoHS compliant.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Bulgin’s waterproof USB Buccaneer connectors are being employed in many different areas and applications, with one of the most prominent as a data ‘downloading’ port.

In this application the panel connector is not always used with a mating connector, instead a USB Flash drive is connected to input or extract data from the equipment.

Some applications warrant the Flash drive being left in-situ, but this can compromise the integrity of the equipment’s environmental sealing characteristics. To overcome this Bulgin have a developed an extended cover that will maintain the IP68 sealing of this interface whilst the Flash drive remains connected. The cover is suitable for use on all Buccaneer USB ‘A’ type connectors: PX0842/A, PX0843/A, PX0845/A and PX0849/A.

Designed to accommodate a wide variety of USB Flash drives this simple accessory will find many uses where transportation of data and sealing integrity of the equipment are important considerations.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

ECO – The smart choice for your demanding power entry requirements

Schurter’s new 20A IEC inlet with EMI filter, series 5130 ECO design, meets the increasing demands of  IT, medical and industrial appliances. The new ECO design provides cost savings and maximum performance in a lightweight and environmentally friendly compact package. 

The 5130 combines an IEC C20 inlet with line filter in various mounting styles. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding. The units are available with current ratings 20A or 16A, depending on attenuation requirements. In addition to the standard version, medical filters with low leakage currents of

Mounting options include a front or rear version for traditional screw and nut mounting or rivet mounting. A version specifically for rear mounting features pre-formed threaded holes for M3 screws, which eliminates the handling of nuts and reduces labor costs. These benefits can also be achieved with the snap-in mounting style. Terminals accept 6.3x0.8 mm quick-connect tabs.

The increasing function and power density of todays IT, medical and industial applications leads to higher energy consumption. The 5130 ECO is the optimal solution, combining uncompromised features and performance with compactness of design to meet this growing demand.

The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Buccaneer Antenna is a robust and completely waterproof antenna specifically developed for three popular frequency bands.

Integrating the antenna with its waterproof connector can reduce the total number of connectors in the RF chain, reducing insertion losses, effectively increasing the total system gain.

The PX0407 covers the 2.4GHz band popular for wireless LAN, Bluetooth and Zigbee, while the PX0408 covers the UHF 440-470MHz band popular for general purpose radio applications and the PX0409 covers the 850-900/1800/1900MHz bands popular for GSM/Cellular applications.

Designed to the same style as Bulgin’s SMB Buccaneer, the sealed antenna has an integrated SMB connector with an overall diameter of just 19mm and the mating panel connector has a panel fixing hole of 16mm diameter. Rated at IP68, the antenna provides complete protection from harsh environments, and all electrical connections are gold plated to ensure system performance and reliability is maintained.

The mating panel connector, PX0414, with an SMB jack, is terminated with RG-174 cable in 0.5m, 1.0m or 1.5m lengths, this provides fast assembly to the panel and only requires termination into the equipment.

Having a two-part solution with removable antenna and panel connector makes installation and testing a much simpler process, whilst also ensuring that the environmental seal and enclosure integrity are maintained.

Typical application areas are industrial, scientific and medical (ISM) radio for instrumentation and telemetry systems, including Zigbee. Additional applications are base stations and outdoor hotspot installations, specifically for wireless LAN, GSM and Bluetooth communication equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/