Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The first 5 pole screwless in line junction box on the market with 5 approved 32A lever connectors; supplied with all components for completely tool-free faster installation

Hylec-APL, the specialist supplier of electrical components and enclosures, has announced the launch of Debox SL2, a completely tool-free in-line junction box which comes complete with five approved lever connectors. Debox SL2 is the smallest junction box with five poles on the market and the only product supplied complete with 5 screw free terminals: each individual 32A lever connector can take up to three conductors. Debox SL2 saves professional electrical contractors valuable time and makes installation easier for smaller and larger internal wiring jobs, as everything needed is supplied with the box and there is no need to use a screwdriver to securely join wires. Thanks to its design, Debox SL2 ends the frustration of dropping tiny screws on the floor, which then have to be retrieved, or not having required components on hand.

A first to the market from Hylec, Debox SL2 is a registered design and suitable for joining either flat or round profile cable with a minimum conductor size of 0.5mm and a maximum of 2.5mm. It is simple to use - after inserting cables and closing the levers, the lid of the box is simply snapped shut and secured with the butterfly clip supplied. To enable the Debox SL2 to be re-opened requires a tool, which complies with current regulations.

Safety is always paramount for electrical components and the Debox range, including the new Debox SL2, is flame retardant to UL940V 0 and conforms to the EN60598-1 (13.2.2) Glow Wire Test. Debox SL2 measures a compact 116mm x 45mm x 33mm and is manufactured from white polypropylene. With a temperature rating of -20degC to +85degC, it is maintenance free and suitable for all internal applications.

Debox SL2 joins the other highly successful Debox in-line junction box products, Debox SL and Debox S. Debox SL, which has four lever connectors, was the first 100% tool less / screwless in line junction box available on the UK market and has since sold in the millions of units.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

White Paper Download Link:
https://www.schurter.com/data/download/3522344

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

S Size Form C (Changeover) Reed Relay

• Compact footprint.
• Changeover contacts.
• PCB Mount.
• Available with or without magnetic screen.
• Up to 3W switching power.
• Up to 1.2A carry current.
• Small package size with compact footprint.
• Rhodium contacts for low contact resistance and high durability.
• Often used in applications which require circuit protection or circuit breakers.

The S3 series is a compact reed relay with changeover contacts which are often used for safety critical applications.

Low contact resistance, through the use of Rhodium contact reed switches, makes the S series suitable for many high voltage applications at DC and low frequency, where performance and reliability are paramount.

These are PCB mount relays, though custom options may be available on request.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Mains Filter: 3-Phase plus Neutral
• Compact design
• Single-stage filter with high EMI attenuation
• Reduced weight
• Low leakage current versions available

FMAD NEO is the name of the latest single-stage filter family for 3-phase systems with a neutral line. Especially compact with high performance, the new filter series is ideally suited for use in today's more portable industrial machines, designed to occupy less floor space in manufacturing plants. A wide temperature range extends its capabilities for use in many critical applications.

Three-phase control cabinets almost always have severe space constraints. Schurter addresses this problem with a completely new filter design, which is much more compact than older generations. The new, almost cubed, design makes optimum use of available space in the cabinet housing. Designed with the highest quality components, the filter attenuation remains very high relative to its more compact dimensions.

The new filter family is also suitable for devices with high EMC loads. Typical areas of application include converters for photovoltaic systems, battery storage units or charging stations for electric vehicles. These high-performance filters are also the first choice for modern frequency inverters for motor control.

The FMAD NEO filter series has screw terminals for safe and reliable wire terminations. A full metal flange guarantees a good earth ground connection upon screw mounting to the chassis. Six fixing holes are provided for the mounting itself, which allows both symmetrical and asymmetrical mounting.

The standard versions can be used over a wide temperature range from -40 °C to 100 °C. The filters are designed for currents from 16 A to 230 A at an ambient temperature of 50 °C. They are ENEC and cURus approved and recommended for applications up to 520 VAC. The standard versions are designed for industrial applications with leakage currents <13 mA. Special versions for leakage-critical applications of <3 mA are also available.

The completely redesigned models of the FMAD NEO family supplant SCHURTER FMAD filters. They offer at least identical performance with significantly smaller dimensions and weight, moreover the series is an ideal substitution for like competitor products.

Applications
- Industrial equipment, machines
- Motor drive applications
- Machine tools
- Energy inverters (photovoltaic, battery)
- Electro vehicle charging stations

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

With an extensive range of Push Button, Vandal Resistant, Piezo, Slide, Toggle and Rocker switches available, Bulgin & Arcolectric’s switch range is designed to meet the design requirements of a wide
variety of industry applications ranging from medical and industrial to marine and commercial electronics. Bulgin’s push button switches are available in front and rear panel mounted versions with three profile types including prominent, domed and low profile as well as rugged stainless steel anti vandal options.

Multiple switching options are available along with IP66, IP67 & IP68 sealed variants in addition to momentary and latching actuation. Illumination versions are available in dot and ring LED indication and a selection of illuminating colours, including bi-colour and tri-colour. Newer versions also feature LED illumination driven by 6V, 12V and 24V together with rear of panel sealing.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Eaton offers a full field-proven line of rockers designed for excellence in many applications. They enable you to maximize efficiency and increase machine uptime even in the most extreme environments.

1500/2500 Series rocker switches are available as Midsize Non-Illuminated and Illuminated, and Hi-Lite Rocker with High Inrush. The 1500H/2500H High Inrush option is designed to handle high inrush currents up to 100A peak inrush for 10 milliseconds. The two-color Hi-Lite Rocker with High Inrush version brightly indicates the ON position. This version spares the expense of more costly illuminated switches and is available with the high inrush option.

Options
• High Inrush
• Hi-Lite Rocker with High Inrush

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/