Lorlin Electronics, the UK’s longest established switch manufacturer, announces the introduction of the WRL series of waterproof miniature key operated lock switches. Sealed to IP66 and IP67 these single or double pole snap-fit switches may be operated by a single common key or one of up to 200 different combinations.
Manufactured at Lorlin’s own factory in the UK the WRL waterproof lock switch is a compact, rugged design, simple to mount, occupies a small panel area and projects less than 30mm from the rear of the mounting panel. All WRL switches are RoHS compliant and an optional M16 earthing tag may be specified where panels might be insulated. The lock is mounted to the panel from the front and the electrical switch snaps on to the back of the mechanism. 60˚ and 90˚ key indexing versions are available and the key may be inserted into the lock either way up and withdrawn in both the locked and unlocked switch positions.
The WRL miniature lock switch is rated for currents up to 5A at 115VAC over an operating life of >10,000 cycles and has an operating temperature range of –20 to +65°C. The new WRL switch family meets a growing need for secure switching in security, alarm, vehicle, marine and industrial applications which may be outdoor or where washing or cleaning is required. We ship high volumes of standard key switches each year and we can now meet the many requests we receive for a waterproof version.”
Typical applications for the Lorlin WRL miniature lock switch include, security shutters, alarm and security control panels in airports, prisons, police stations etc, factory equipment, instrumentation and electrical control panels.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
April 2007 – A comprehensive range of miniature incandescent lamps including advanced Xenon filled types and matching drop-in replacement sockets is available from CML Innovative Technologies (CML-IT). Delivering a cost-effective solution with high luminous output, traditional incandescent lamps still have a valid role in many applications such as automotive, gaming, aviation and transport, where cost restrictions don’t warrant the use of still higher-priced, modern LED lamps.
Produced in Bury (United Kingdom) and Bamberg (Germany), CML-IT’s range of Xenon filled miniature incandescent lamps, for example, benefits from a long service life of 10000 hours, a cool wall temperature (about 30 degrees Celsius less than comparable Argon lamps), a very high colour temperature and high output in low watt versions. Compared with conventional incandescent lamps, Xenon filled types also offer power savings.
Miniature incandescent lamps generate significant sales of approximately $40M per year for CML-IT and recently prompted a major investment at the company’s production facility in Bury. A new socket machine was commissioned and will increase the production of sockets from 440000 units per week up to 660000 units per week. This will make it even easier for customers to directly source miniature incandescent lamps together with matching sockets from CML-IT.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Finder announces a new generation of its 14 Series electronic staircase timers, which have been designed for energy saving control of lighting in areas of temporary occupation. The latest models feature microprocessor control, and are targeted at lighting applications in stairwells, corridors, washrooms, storerooms and similar areas that only require illumination for short periods of time.
Designers, contractors and installers of lighting in commercial and residential property are continually looking for ways to reduce energy consumption by eliminating wasteful lighting in unoccupied areas, while addressing the growing need to illuminate more public areas for security and safety reasons in an economical way. Staircase timers such as the 14 series offer a cost-effective solution that is simple to implement even in small installations.
The 14.01 timer is a multi-function unit, while the 14.71 is a single function version. Both models have an on period that is adjustable between 30s and 20 minutes, so that a single timer is suitable for wide range of installations. This flexibility of operation means that specification is simplified and inventory levels can be kept to a minimum. A further single function model, 14.81, offers wiring compatibility with earlier mechanical models.
All the new timers feature zero-crossing load switching, which enables the switching of higher lamp loads and also offers the benefits of longer lamp and unit life and reduced RF interference. A switch-off early warning function on the 14.01 gives a user who is still in the area time to re-activate the timer before the light is turned off.
Multi-function features on the 14.01, accessed via a simple rotary function selector, include timed control with or without manual override, early warning, standard on/off, permanent on and maintenance function with extended 60 minute on time.
Each timer can be used with up to 30 illuminated pushbutton actuators, offering local control over a wide area and thus giving the user maximum opportunity to re-activate the timer before being plunged into darkness: this enhances safety, and is especially beneficial in stairwells.
All the 14 Series timers are housed in a 35mm rail mounting enclosure that is 17.5mm wide, and have a timing adjustment suitable for standard consumer unit.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
WERMA Opens It's Own Facility in the UK
The South Germany based signal technology manufacturer WERMA Signaltechnik has opened a UK facility on 1st May 2007.
The opening of the facility comprising of an extensive warehouse and sales organisation, was witnessed by a number of visitors from the local industrial scene who were able to see at first hand examples of the extensive range of signal products available from the company.
WERMA Goes Global!
The demand for optical and acoustic signal devices in the UK has increased steadily in recent years. WERMA products are no strangers to the market place having been available from a number of distribution sources for the last five years. The new facility based in Kettering Northants will enable the company to react quickly and efficiently to customer demand and offer also a complete technical service from the experienced local team.
The aim of “getting close to the customer”, a key objective for WERMA, thus becomes a reality. This aim is not just a question of WERMA jumping on a customer service bandwagon – it reflects, in fact, the very essence of the corporate objectives of the parent company, developed and honed over years of experience in the market place.
A Competent Team with Years of Experience
The team in Kettering is led by Simon Adams, who, together with the National Sales Manager Pete Osborn , have many years of experience in the UK signal technology market. They are assisted by Christiane Kundt who will run the office and Martin King in charge of the warehouse.
A Worldwide Competency in Quality and Innovation
In addition to the newly opened subsidiary in the UK WERMA, with its head office in Rietheim, South West Germany, has sales offices in Switzerland and China. Agents and Distributors in a further 35 countries assure worldwide coverage for its products.
With over 50 years specialist experience in signal technology, WERMA rightly considers itself to be a leading trendsetter and innovator in the industry. All WERMA products meet recognised international standards and are manufactured under the recognised quality management system DIN EN ISO 9001: 2000.
High quality, brightness of illumination, ease of assembly and installation and a high degree of user friendliness are just some of the characteristics of the products.
The product portfolio offers an enormous range of basic products augmented by an almost unlimited range of accessories and combinations giving them unparalleled applications in signal technology.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Crydom Solid State Relays (SSRs) are widely used in the food equipment industry as replacement to mercury contactors and electromechanical relays because of their ability to work in harsh environments. Since there are no moving parts contact wear is eliminated and their semiconductor based design makes them environmentally safe to be used in most applications including; ovens, fryers, heaters broilers, food warmers and holding equipment, and coffee makers.
Their epoxy sealed design even allows use in moisture prone applications such as produce misting systems found in grocery stores. Using Random Turn-on type Crydom SSR’s provides the ability to vary the available power to resistance type heaters by using burst control and with the availability of the new Crydom MC series of Temperature Proportional and Burst control products, the solutions are even easier than before.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Bulgin is proud to announce two new ranges of pushbutton switches for industry standard 16mm diameter panel holes.
The first of the new range is a compact switch extending less than 21mm behind the panel. These single pole, momentary, push to make switches are rated at 2A, 48Vdc and are capable of 100,000 operations at full load and 1,000,000 mechanical operations. There are three button styles; flush, domed and prominent, and all switch variants have screw terminals. The MP0042 is manufactured in stainless steel with a polished finish. The MP0044 is manufactured in gold plated brass to give an extra touch of quality. These attractive switches will find themselves at home on panels and equipment where a robust and but aesthetically pleasing switch is needed.
The second range of 16mm stainless steel switches also have a polished stainless steel finish. They are slightly longer behind the panel but boast many more features. Rated at 3A, 250Vac and capable of 30,000 cycles at full load and 200,000 mechanical cycles, these switches are robust enough for manyFORMATION demanding applications. The MP0045 series have double pole switching with momentary or latching operation, and solder tag termination. The two styles of buttons, flush and protruding, are also available with dot and ring LED illumination. Standard illumination colours are amber, blue, green and red, and integral resistors allow operation from a 12Vdc or 250Vac supply.
--------> Technical Data Sheets 16mm Stainless Swt ds.pdf
The extensive list of variations for these switches will allow their use in many applications where an attractive but robust small diameter switch is required.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Finder has announced an update to its 80 series timers, which now provide improvements in functionality, multiple supply voltages, a wide choice of time ranges and greater ease of use.
The 80 series timers find uses in applications that include process timing, material handling, access technology, and industrial equipment such as elevators, environmental, washing and shot blasting equipment. Additionally they are used by OEMS for functional timing in mobile, portable and battery powered equipment and testers.
In the latest version of the 80 series timers, the range and function selectors, the timing trimmer and the rail mounting clip have all been modified to accept either cross head or flat blade screwdrivers, allowing for easier setting and mounting. Snap-on marker tags are now mounted on the front of the timers, which can be sheet printed automatically for speed and clarity. The start signal can now also switch a separate load, giving the possibility of reducing the need for additional components
The time range scale can now be changed without the need to remove the power supply, allowing greater flexibility for timing adjustment without any disruption of the circuit.
The 80 series timers are housed in compact packages measuring only 17.5mm wide by 57mm high. All timers in the range are now multi-voltage, which means that fewer variants need to be stocked. The timers run from either 12V to 240V AC or DC – for the multi function and recycler versions – or 24V to 240V AC/DC for all other variants. The 12V to 240V type is suitable for use in battery-powered systems.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Overview:
Optoelectronics is the integration of optical principles and semiconductor electronics. Optoelectronic components are reliable, cost-effective sensors. Standard infrared emitting diodes (IREDs), sensors and assemblies are covered.
.jpg)
Best Used For:
Object presence sensing, motion sensing, position encoding, limit sensing, movement detection and counting.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Just 17.5mm wide for single pole versions and 52.5mm wide for triple-pole types, Moeller Electric’s new Xpole FAZ miniature circuit breakers (MCBs) have a breaking capacity of 15kA, in line with IEC/EN6094. This makes them an attractive and cost-effective choice for use in industrial applications where space is always at a premium, and high prospective fault currents are often encountered.
In addition to the standard B, C and D trip characteristics, Moeller is offering Xpole FAZ MCBs with the new Z, K and S characteristics, which are of particular interest to OEMs and designers of automation systems.
Specifically designed to protect sensitive electronic equipment, the Z characteristic has a short-circuit response current of 2 to 3 In, combined with quick-reaction overload protection. The K characteristic has a short-circuit response current of 8 to 12 In, which prevents nuisance tripping with three-phase loads such as motors, while the S characteristic with its exceptionally high 13 to 17 In short-circuit response provides a complete solution to the problem of protecting control transformers and other loads with very high inrush currents.
Moeller Electric's new Xpole FAZ MCBs are available with ratings from 0.5A to 63A, and are offered in single-, double-, three- and four-pole versions. All types comply with a broad range of national and international standards, including UL and CSA, there is even a special series of devices which fully comply with UL489.
A range of accessories, which includes auxiliary signalling contacts and shunt-trip mechanisms, provides additional functionality. To ensure fast and easy assembly, most accessories simply snap into place without the need to use tools. The breakers themselves are designed for convenient mounting on standard DIN rail.
The new compact Xpole FAZ MCBs are complemented by an extensive family of RCCBs, combined RCD/MCBs (RCBOs) and control devices. The PKNM combined RCD/MCBs offer triple protection in a single device, namely overload, short-circuit and residual current protection in the space of only two MCB widths. Catering for either B or C characteristics, they are available from 6A to 40A with rated fault currents of 30mA or 300mA.
Xpole type AZ MCBs are also available for use in applications where current ratings up to 125A and a switching capacity greater than 15kA is needed.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
GSS Series, Safety Limit Switch, 3NC/1NO Direct Opening, Slow Action, Hinge Mount, 1/2 NPT, EN50047 Compatible, Zinc Die-cast, Gold-plated Contacts
FEATURES
• Positive opening operation of normally closed contacts
• Available with up to 4NC positive opening contacts
• Galvanically isolated contacts
• Available with gold-plated contacts for improved switching reliability at low currents and voltages
• Wide selection of actuators
• UL, CSA, CE, BG pending
TYPICAL APPLICATIONS
• Machine tools
• Material handling equipment
• Packaging machinery
• Textile machinery
• Construction machinery and equipment
DESCRIPTION
The GSS Series Global Safety Switch is available in three configurations:
• GSA - Standard mounting per EN50041
• GSC - Standard mounting per EN50047
• GSE - Compatible with standard mounting per EN50047
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2024.
UK distributor of electrical and electronic components.
