The introduction of Schaffner ECOsine™ filters concludes the era of bulky passive harmonic mitigation products. Superior filter topology and advanced temperature management result in high performance filters in a surprisingly compact, lightweight, and contemporary package.
UP1 Undervoltage Release Switch for Operators Safety
The new UP1 undervoltage switch monitors the supply voltage and actuates a trip release when there is an intense drop in voltage or when the supply voltage is interrupted. As soon as the supply voltage returns in full, the machine or equipment does not automatically restart in an uncontrolled manner, but must be consciously switched on again. Using this function, dangerous situations for operating personnel as well as for the surroundings of the device itself can be prevented.
The UP1 is a 2-pole circuit breaker with additional undervoltage monitoring actuates a trip re-lease with a loss of voltage or an intense voltage drop. The breaker is available with rocker actuation for snap-in mounting or with push-button actuation for both snap-in mounting as well as screw fitting. Protection covers against the ingress of dust and spray water make the use of the breaker in harsh environments such as wood-, masonry- or metal-workings possible.
The requirement for the use of undervoltage protection is in existence for applications such as gardening equipment, gardening shredders, floor cleaning and sanding devices, electrical tools such as circular saws, band saws, grinding machines and drills. Further examples are fuel pumps, coffee-milling devices, fruit juice squeezing machines and fruit juice centrifuges.
The UP1 undervoltage circuit breaker is configured differently in its hardware for various net-work supply voltages und must be therefore ordered for the appropriate supply voltage. Rated switching category is AC-1 16A / AC-3 14.5A @ AC 240 V. The breakers are approved to IEC 60947, UL 508, CSA 22.2 No.14-95 and also contain a horsepower rating.
Technical Characteristics:
- 2-pole switch
- Undervoltage trip release with restart prevention
- Available with rocker or push-button actuation
- Dust and jetting water protection to IP 65
- VDE & cURus approvals for rated currents AC-1 16A / AC-3 14.5A @ AC 240V
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The expanded DRA Series now includes compact DIN Rail Mounted 3 Phase AC Solid State Contactors, 3 Phase AC Solid State Motor Reversing Contactors, and DC Solid State Motor Reversing Contactors!
Crydom introduces its expanded offer of DRA Series compact DIN Rail Mounted Solid State Contactors. Complementing existing single channel and four channel AC and DC output DRA Series, the new models include 3 phase UL approved AC output ratings of either 1 or 2 horse power at 480 VAC in both contactor and motor reversing configurations, and UL approved DC output ratings of ¼ horse power at 90 or 180 VDC. IEC 60947 ratings are available as well for both AC and DC output DRA Series.
DRA Series 3 Phase Contactors feature an SCR output all solid state design with 4000 VAC optical isolation, AC or logic compatible DC control inputs, both with input status indicator, UL approved motor and AC output resistive load ratings of either 2.4 or 4.2 amps per phase from 48 to 510 VAC. Motor reversing models also include a control interlock feature that allows only off, forward and reverse operation.
DRA Series DC Motor Reversing models feature a FET output all solid state design with 2500 VAC optical isolation, logic compatible DC control inputs with input status indicator, and UL approved motor and DC output resistive load ratings of either 6 A @ 180 V and 12 A @ 90 V.
Designed for easy mounting to standard 35 mm DIN Rail, the new DRA Series of 3 Phase AC and DC output Solid State Contactors and Motor Reversers are available in a variety of input and output ratings.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
V-Lock Cord Retaining System
This V-Lock system by Schurter is an attractive and simple solution to prevent an unintentional unplugging. Various different connectors, Power Entry Modules and several country-specific power cables are available with this option.
.
The V-Lock locking system can be used for 10A and 16A power inlets and connectors according to IEC 60320. This system works in such a way that there is a pin in the socket, interlocking with a notch in the plug and thus prevents an unintentional pullout of the power cable. The advantage of this system is that there is no need for a specific socket system or retaining device that has to be adapted and built-in.
The locking is released by pressing on the releasing lever. This lever is easily detected by its bright yellow colour and thus distinguishes this system from existing power cable connections. The extraction force is a minimum of 200 N. Typical applications are in medical appliances,
analysis and laboratory instruments, Telecom and IT- devices, power distribution or radio and TV-studios.
.
USP's: - prevents unintentional disconnection
- increased safety and reliablility
- most cost effective cord retaining solution on market
- attractive design
- easy to use
The following connector types can be manufactured with the V-Lock option in series:
6010, 6061, GSP1, GSP2, DF11, 6600-3, 6600-4, 6610, 4797
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Click on the Link Below to View Catalogue
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Finder has announced additions to its 18 Series of PIR motion detectors supporting a variety of interior energy saving schemes. The compact 18.21 and 18.31 variants will meet the needs of higher ceiling, higher load switching applications and those requiring direct interface to a PLC or BMS.
Recess mounted, the flush fitting 18.31 suits suspended or plasterboard ceilings while the 18.21 is a low profile PIR for hard surface mounting. Providing a 10 amp rated normally open volt free output, the detectors will switch loads at any voltage and are not restricted to 230VAC mains tasks. 24V ac/dc supply versions are also available for applications without a mains supply or where safe, low voltage operation is required.
With a 110º wide sensing angle and a reach of 2.8m, the 18.21-0300 and 18.31-0300 PIRs will handle all types of regular ceiling height applications. For high bay or extended ceiling height duties, the 18.31-0031 PIR variant offers a much longer sensing range of up to 8m.
The Finder PIRs also offer an adjustable light threshold setting allowing operation to be varied according to ambient light conditions. In addition, an enhanced light-on time adjustment of up to 35 minutes makes the PIRs well suited to HID lamp applications, which for reasons of preserving lamp life, place a restriction on the number of starts per hour.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Customizable Devices Provide High Sensitivity at Very Low Flows, Low Pressure Drop,
High Stability, and Help Reduce Production Costs
Honeywell announced the introduction of the Honeywell Zephyr™ Digital Airflow Sensors that deliver the industry’s most accurate airflow reading across the operating range of the sensor. The new HAF Series devices provide highly accurate digital output, enhanced reliability, and repeatable measurements to meet many medical and industrial application specifications.
The Honeywell Zephyr™ Digital Airflow Sensors offer several competitive advantages not found in other digital airflow sensors, including:
* High 2.5% accuracy that allows for very precise airflow measurement, often ideal for demanding applications with high accuracy requirements;
* Customization, which allows the sensor to be designed to meet specific end-user needs;
* High sensitivity at very low flows to enable the detection of the presence or absence of airflow in the application;
* High stability to reduce errors due to thermal effects and null shift to provide accurate readings over time, often eliminating the need for system calibration after printed circuit board (PCB) mount, and periodically over time;
* Low pressure drop, which typically improves patient comfort in medical applications, and reduces noise and system wear in components such as motors and pumps;
* Linear output to provide a more intuitive sensor signal than the raw output of basic airflow sensors which can help customers reduce production costs and implementation time.
The Honeywell Zephyr™ Digital Airflow Sensors simplify the customer’s production requirements due to Application Specific Integrated Circuit (ASIC)-based I2C digital output that eases integration to micro-processors or microcontrollers, reducing PCB complexity and component count. Their small size occupies less space on the PCB, allowing for a smaller PCB, which can reduce production costs and simplify installation in space-restricted applications. Their low 3.3 Vdc voltage option and low power supply requirements allow for use in battery-powered and portable applications.
Honeywell Zephyr™ Digital Airflow Sensors are designed to measure mass flow of air and other non-corrosive gases. They are available in standard flow ranges, and are fully calibrated and temperature compensated. They provide a digital interface for reading airflow over the specified full scale flow span and temperature range, and their thermally isolated heater and temperature sensing elements help provide a fast response to air or gas flow.
Potential medical applications include anesthesia delivery machines, hospital diagnostics (spectrometry, gas chromatography), nebulizers, oxygen concentrators, patient monitoring systems (respiratory monitoring), sleep apnea machines, spirometers, ventilators, and ventricular assist devices. Potential industrial applications include air-to-fuel ratio, analytical instrumentation (spectrometry, chromatography), fuel cells, gas leak detection, gas meters, HVAC filters, meteorology equipment, and variable air volume (VAV) systems on HVAC systems.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
New feature makes further customization possible
Schurter proudly announces the addition of a colour anodized aluminium housing to the popular line of metal pushbutton switches. The red and green housings can be used to distinguish the start/stop switching functions.
The robust vandal proof switch has an IK07 protection class for high impact and IP67 ingress protection against water and dust. Its low profile flat front construction guards against side impact. The actuator is made of durable stainless steel.
The standard versions of the new MSM color housing are offered in 19 and 22mm mounting diameters with electrical rating of 5A @ 250 VAC. Additionally, custom lettering, other mounting diameters, and colours are available. Versions with switching current and voltage of 100 mA @ 30 VDC, or 10A @ 250 VAC are also available. A version with IP67 rated microswitch provides seal protection from the back. Terminals are quick-connect. Assembly includes pre-wiring of the contact module, which is then snapped onto the actuator housing. Typical applications include controller panels for automated machinery, construction machinery, industrial and medical equipment.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Finder has extended its relay range with versions designed to suit photovoltaic (PV) inverters, domestic appliances and other equipment needing reinforced insulation, high ambient temperature handling and full disconnection contacts. The latest product introductions comprise the 45.31 16A rated mini PCB relay and 3 special variants of the 66 Series 30A rated power relays.
With an extended 3mm contact gap, the single pole NO 45.31 relay meets the requirements of the EN60730-1 standard for household use and is rated for operation at an ambient temperature up to 105ºC. It has a high sensitivity 24V DC coil rated at 360mW. In common with the 66 Series specials, the 45.31 has been designed with an 8mm clearance and creepage distance, ensuring safe separation of supply and output, and reinforced insulation between coil and contacts, meeting the requirements of EN60335-1 (VDE0700).
The 2 pole NO (DPST-NO) 66.22-x600, 66.22-x600S and 66.82-x600 30 amp power relays ensure a contact gap separation of 1.5mm, fully meeting the requirements of the VDE0126-1-1 standard for PV inverter applications. In addition, the 600S variant provides a 5mm airgap between relay base and PCB for extra cooling particularly in systems where forced air cooling is employed as with many PV inverters.
For added flexibility, the 66 Series relays provide the options of PCB and flange mounting and Faston 250 terminations. A 35mm rail mounting adaptor is also available. A wide range of coil voltages is offered, spanning from 6V through to 125VDC.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2025.
UK distributor of electrical and electronic components.
