Patent-pending, compact, high-functional density
design meets off-road vehicle requirements

Honeywell has introduced a new line of handlebar controls to meet off-road vehicle manufacturers’ desire for controls that are easily customized, incur low upfront tooling costs, enhance safety,and increase design flexibility.

Honeywell Sensing and Control’s new 1080HD Series Handlebar Controls provide off-the-shelf, SAE spec-qualified handlebar controls that provide a greater number of functions per package volume and are easily configured in different ways. With little up-front investment for the OEM, Honeywell’s platform approach creates a customized right or left-hand control in a cost-efficient, qualified handlebar control to support short OEM product design cycles.

The 1080HD Series offers enhanced safety through an optional runaway prevention switch, and through a smaller form factor that enables easier user access to critical vehicle functions.

To meet additional requirements for design flexibility and aesthetic differentiation, Honeywell developed three patent-pending designs that can be applied to the new handlebar controls. Common components and inserted tooling reduce
tooling investment and minimize procurement complexity while also improving manufacturability. The product’s smaller size and easy configurability increases OEM design flexibility in both functions and in attachment and accessory options. Standard
circuitry and components shorten OEM product development times, and the unique design specification meets most North American off-road and European on-road requirements.

These customized controls may be designed for use on appropriate vehicles with handlebars, including ATVs, snowmobiles, electric vehicles, Segway® mobile platforms, motorcycles, or standing, handle bar-maneuvered machines (i.e. industrial
sweepers, grocery/luggage cart collectors, etc.)

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The HS series feature DIN rail and Panel mounted Heat Sinks
rated from 5.0 to 0.5 °C/watt, accepting 1, 2 or 3 industry
standard, single, dual or 3 phase Solid State Relays, and
corresponding SSR Assemblies rated from 10 to 82.5 Amps

Crydom, an operation of Custom Sensors and Technologies (CST) and global expert in Solid State Relay Technology, introduces a new line of Heat Sinks, Solid State Relay/Heat Sink Assemblies and Accessories. Designed with “state of the art” thermal analysis software tools, the Crydom HS series includes heat sinks accepting 1, 2 or 3 industry standard, single, dual or 3 phase SSRs. Designed for DIN rail or panel mounting, models are available with thermal impedance ratings from 5.0 to 0.5 degrees C per watt.

Combining proven Crydom Solid State Relays with the new HS series heat sinks allows Crydom to offer a variety of standard and adapted “ready to use” Solid State Relay/Heat Sink Assemblies. Ratings from 10 to 82.5 amps are available at either 280 or 600 VAC. Standard features include 3 to 32 VDC input control voltage, zero voltage turn on, and output RC snubber networks. Single, Dual and 3 phase SSR Assemblies are suitable for controlling most heating, motion or lighting loads.

Additional features of the HS series include RoHS compliance, UL/CSA/TUV or VDE approved CE compliant Solid State Relays, accessories including clear plastic touch safe SSR covers for single and 3 phase SSRs, thermal interface pads for single and 3 phase SSR packages, DIN rail mounting kits, and SSR hardware mounting kits.

Crydom also welcomes SSR and Heat Sink adaptations combining not only any standard Crydom Heat Sink and SSR products, but Customer Specific modifications to Heat Sinks, SSRs or Assemblies.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Metal Switches with High Resistance to Destructive
Elements, Fully Illuminated Actuating Surface

The new MSM CS metal switch from SCHURTER is equipped with an actuator made of highly durable ceramic. Ceramic is a new technology employed in the production of an electro-mechanical switch.  The new switch provides novel features that open up entirely new areas of application. The actuator material of the MSM CS is resistant to scratches, abrasion, impact and chemicals.

The non-illuminated version has a translucent white actuating surface. Lettering is black and is applied directly onto the ceramic material. Due to the base material and the lettering process, the lettering is resistant to scratches and to common cleaning agents. In the case of switches designed with illumination, the actuator surface fully illuminates uniformly across the entire surface. Lettering and symbols can also be applied. The standard black lettering provides a positive effect against the illuminated actuator, while negative lettering provides an inverse effect.

The MSM CS is extremely robust and meets vandal-proof demands due to the low profile of the front structure (1.7 mm), the IP 69K protection class and the high level of impact resistance. The switch is available in 19 mm and 22 mm mounting diameters. Different contact configurations are offered over a range of 30 VDC to 250 VAC for the admissible switching voltage; switching currents are permissible from 0.1 to 10 Amperes. The MSM CS is equipped with quick connect terminals to allow for fast connections. The wires are connected to the switching element which is subsequently snapped onto the switch housing.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

IP56 Rated Against Damp and Dust: Long Product Life

Cherry Electrical Products has launched three new families of waterproof rocker switches which are available rated for various AC and DC voltages, including high current 20A versions.  Typical product applications include outdoor power equipment, such as sprayers and power tools; garden vehicles such as lawn mowers; automotive products like dashboards and window controls; other types of non-road transport, including boats and snowmobiles, and medical equipment, for example, oxygen concentrators.

Three families of rocker switches are available:  the KG, KM and KT series, which cover a wide variety of pole, throw and switch function options to support such a diverse range of customer applications.   All three families are rated to IP56 against water ingress or dust and are approved under UL and VDE.

The KG series includes one single pole, single throw (SPST) switch, (on-off), two SPDT (on-on and on-off-on) and one DPDT version (on-off-on), all with black actuators and frames, designed with snap-in mountings to fit panel cut-outs of 1.449in x 0.835in (36.80mm x 21.20mm).   Electrical ratings are: 21A 14VDC and two UL1054 rated versions: 20A 125VAC and 10A 250VAC.   Temperature rated from -20degC to +85degC, and with a mechanical life of 100,000 cycles, these switches are robust enough to withstand repeated use in tough environments.

The KM family of waterproof rocker switches is available as single pole, single throw or single pole, double throw and two double pole versions with single or double throw, and is available lighted and non-lighted.  The actuator and housing are both black, with red or green lenses for lighted versions.  Electrical ratings are 20A 125VAC, 10A 250VAC and 21A 14VDC, with a dielectric strength of 1500 VAC for 1 minute.

KT series SPST and SPDT switches are oblong with black oblong actuators and are designed for easy snap-in mounting on panel cut-outs of 1.454in x 0.602in (36.80mm x 15.20mm).  Both lighted and non-lighted versions are available.   Electrical ratings are: 21A 14VDC; an EN61058-rated 10(4)A 250V version; and two UL1054 rated switches -  20A 125VAC, 1/3HP and 10A 250VAC, 3/4HP.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Wide sensing distances plus the resistance to high temperatures and fluids have become mandatory features in the selection of IDEM Non-Contact Safety Switches for guarding applications. Idem Safety Switches has launched a compact fully enclosed high grade plastic non contact interlock switch to cope with the rigorous demands of the food, beverage and pharmaceutical environments. 

Available with up to 2 circuits switching high power up to 2A at 230V.ac.  The Idemag CPR range offers a compact slimline fitting and provides environmental protection up to 80C. and is suitable for high pressure hosing (IP66/67).

The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability. In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated from either the side or front switch face.

They will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter announces the USF 0402 surface mount fuse, making it the smallest new member to its USF family.  This tiny new addition performs with a Super Quick Acting (FF) characteristic at rated currents ranging from 0.375 - 4A at 32 VDC, 5A at 24 VDC.

 
The USF 0402 is ideally suited for secondary circuits where space is critical, such as those found in consumer electronics. Compared to like products on the market, it provides increased reliability because of its ability to dissipate less heat. Typical applications are battery operated handheld and portable electronic devices, like laptops, cell phones, GPS systems, PDA’s and many other devices that have demand for increasingly smaller components. 

The Schurter USF range of chip fuses includes the 0402, 0603 and 1206. The size of the 0402 measures a fractional 1.05 mm x .55mm x 0.475 and is 2-3 times smaller than the 0603. A letter marking on each fuse indicates its current rating to ensure tracking of the proper fuse through the production process.  The fuse is UL 248-14 approved and carries cURus approval. It also holds a Free of CCC certificate from China. Terminals are gold-plated copper alloy. The USF 0402 comes packaged in tapes of 1K, 5K or 15K pieces on reels.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Honeywell introduces its SS361RT and SS461R Bipolar Latch, Hall-Effect Magnetic Position Sensors, giving customers the opportunity to help reduce manufacturing costs.

The SS361RT and SS461R sensors’ enhanced sensitivity enables the use of less expensive magnets in some applications. The SS361RT sensor’s very small footprint takes up less space on the printed circuit board, typically allowing for a reduction in costs. Additionally, the SS361RT sensor is supplied on tape and reel, allowing for automated, highvolume, lower-cost pick-and-place assembly.

Honeywell designed the SS361RT and SS461R sensors for potential use in industrial applications (e.g., speed and RPM sensing, tachometer, flow-rate sensing, valve/damper position, brushless dc motors, variable speed drives, motor and fan control, and robotics control), medical applications (motor assemblies, medication dispense control), and transportation motion control applications (e.g., RPM sensing, tachometer, motor and fan control, electric window lifts, convertible roof positioning, and transmission positioning).

Honeywell’s SS361RT and SS461R sensors feature a 3 V supply voltage capability for low-voltage applications. The sensors are available in two package styles, providing application flexibility. The SS361RT’s miniature SOT-23 surface mount package utilizes a tape and reel format; the SS461R’s flat TO-92 style is available in bulk (1,000 units per bag).

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Finder has introduced a compact 2 pole, 8A relay interface module for safety critical circuits.  Conforming to the EN50205 type B standard, the 48.12 features forcibly guided changeover contacts (1 NO and 1 NC) to enable positive monitoring of switching contact states and large physical separation between adjacent contacts to remove any risk of flashover.

To help minimise panel space and to ensure rapid installation, the Finder 48.12 safety relay interface module measures just 15.8mm wide, provides screw terminal connection and is designed for standard 35mm rail mounting.  Where required, an 8-way jumper link is also provided for commoned connections.

The 48.12 features a 0.5W DC sensitive coil, available as standard in 12V and 24V versions.  The wide compatibility that results means far greater flexibility for circuit designers in a wide range of plant, process and machinery guarding, emergency stop and critical monitoring applications.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Three new families of pushbutton and rocker switches now immediately available: to suit automotive, medical, and power equipment

  
Cherry Electrical Products’ new KC, KF and KD round waterproof switches comply with IP56 or IP65 specifications to provide a cost-effective solution for the vast number of applications requiring protection from water and dust ingress, such as garden sprayers, powered garden tools, lawnmowers, on and off-road vehicles and medical equipment.  Three product families are available: the KD and KC series of round rocker switches and the KF switch series for products requiring a pushbutton solution.

IP56-rated KC series switches are designed to fit panel cut-outs of 0.795in (20.20mm) diameter, and are available in lighted and non-lighted versions, with black actuator and housing for the non-lighted version and red actuator, black housing and red lens for the lighted version.  This series of single-pole, single-throw (SPST) function switches offers multiple terminal options.  Electrical ratings include 16A 125VAC, 10A 250VAC, 20A 14VDC, 10A 28VDC and an EN61058 rated version in 10(4)A 250V.

KD series switches are available in two versions: DPST (double pole, single throw) and DPDT (double pole, double throw).  Featuring snap-in mounting to fit the same aperture sizes as the KC series, they can be ordered in lighted and non-lighted versions and handle DC and AC loadings to the following specifications: 16A 125VAC, 10A 250VAC, 20A 14VDC, 10A 28VDC and have quick connect 0.187in (4.76mm) terminals.

For applications requiring a round pushbutton switch rather than a rocker, the KF-series is offered in five different versions, both SPST and DPST and both types of switch can be supplied lit and unlit as required. Maintained-action and momentary switching is a further option. The KF series has quick-connect 0.187in (4.76mm) terminals and is IP-65 compliant. Electrical ratings are: 20A 14VDC and 10A 28VDC, and in UL 1054 ratings of 10A 125VAC; 6A 250VAC; 1/2HP; 125/250VAC are available. 

All three switch families are robust in use, offering a mechanical life of 100,000 cycles and a long electrical life of between 6,000 and 25,000 cycles.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Idem Safety Switches is one of the leading design companies for Switches.

Idem has introduced the Guardian Line range of Safety ‘Grab Wire’ Rope switches -the world’s most comprehensive range of Grab Wire Safety switches covering all applications and industry sectors.

One of the areas which makes the Guardian Line new and innovative is in the area of rope connectivity. Traditional ‘turnbuckle’ style rope fasteners and adjusters are prone to rope slippage and require frequent re-tensioning leading to production loss caused by machine down time.

Idem has overcome this common problem by providing a ‘no nuts or bolts’ rope connection system with a ‘Quick Link’ clasp at one end of the rope and a patented Tensioner /Gripper at the other.

The Tensioner / Gripper is located at the switch (rather than elsewhere along the rope length) so that the switch tension window can be viewed.

Final setting and locking can be achieved in a matter of seconds without any need for frequent re-tensioning.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/