SMD Ceramic Fuse with Very High Breaking Capacity
• 26 rated currents from 0.16 to 50 A
• International approvals
• Time-Lag T characteristic
• Impermeable to potting compound
The well introduced SMD ceramic fuses of the UMT-H family have been expanded in the form of a 40 A and a 50 A version. Schurter now offers the UMT-H with its Time-Lag T characteristic in a total of 26 rated currents between 160 mA and 50 A.
The UMT-H SMD ceramic fuse now covers a current range from 160 mA to 50 A at voltages of up to 277 VAC and 250 VDC. This makes the cuboid fuse ideal for cost-efficient automated assembly. Its large solder pads ensure excellent heat dissipation.
Applications
The UMT-H was specially developed for primary protection in industrial electronics at nominal voltages of up to 277 VAC. Additional areas of application are energy supply, medical technology and telecommunications as well as e-mobility. New market developments show that currents of 40 A and 50 A are increasingly needed for battery-powered applications.
High Inrush Currents
The UMT-H is predestined for use in applications with high inrush currents (e.g. motors) due to its Time-Lag T characteristic. But also newer applications, which increasingly rely on powerful accumulators, often require slow tripping.
Impermeable to Potting Compound
The UMT-H remains tight with most commercially available potting compounds. Therefore, this fuse is especially suitable for high demands. In addition, the high breaking capacity of 1500 A and the cap distance of >10 mm make the UMT-H the ideal choice for explosion protection.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Thermal Circuit Breaker with Modern Design and Refreshing Colors
• New design with a variety of color combinations
• Unique UL rating of 277 VAC
• Finely graded rated currents
Improving a good product - this was the principle behind the development of the Schurter TA36 thermal circuit breaker. Based on the TA35, which has been successfully proven for many years, a refreshing product with a contemporary look was developed.
No longer only functionality and quality matter. Today, a good product must also withstand the critical gaze of a clientele who is accustomed to design.
Refreshing Design
A switch is operated with fingers - sensible sensors. Surfaces and materials are providing a direct feedback, to indicate and feel the quality of a product. Gently curved lines and the best materials combined in the TA36 result in an appealing feeling. Both the flange (3 colours) and the actuator (7 colours) are available in a variety of trendy colours and colour combinations with 5 different types of markings.
Proven Technology
Technically, the TA36 series offers proven technology over years: it is a particularly versatile series of miniature circuit breakers with an especially high UL rating of 277 VAC. It is available as a 1- or 2-pole version and impresses with its compact dimensions.
Wide Range of Applications
The new TA36 offers both the function of an appliance switch and thermal overcurrent protection. Finely graded rated currents from 0.05 A to 20 A are available for 1- and 2-pole circuit breakers. The TA36 switches are designed for efficient snap-in mounting and are equipped with plug-in connections (Quick Connect).
There are almost no limits for the TA36 to find its purpose in various applications: from industrial and medical technology to consumer goods, a TA36 fits almost everywhere.
The TA36 Circuit Breaker is Characterised by Following Key Data:
• Nominal voltage up to 277 VAC and 60 VDC
• Nominal currents with fine gradings from 0.05 A to 20 A
• Rocker-type actuation
• 1-pole or 2-pole versions with quick connect terminals
• Operational temperature from -30 °C to +60 °C
• Degree of protection IP40 (front side)
• UL and VDE approvals (*CCC pending)
• «Retrofit» compatibility given with TA35 circuit breakers
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Manufactured from quality moulding and metal components to ensure a secure and reliable connection, Bulgin’s battery holder range caters for battery sizes AAA (R03), AA (R6), C (R14), D (R20) and PP3 (6R61), accommodating 1, 2, 3 or 4 cells.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The dust and waterproof Data Buccaneer range includes a wide variety of sealed circular connectors designed specifically for Ethernet, USB (including mini-usb and micro-usb) and SMB applications.
Our sealed RJ45 Ethernet connector solutions meet Cat 5e requirements for data rates up to 100Mhz and are suited to a wide variety of industrial & harsh environment applications.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
A full range of IP66, IP67, IP68 and IP69K rated environmentally sealed circular power connectors designed to provide secure, robust and watertight connections in heavy duty, industrial & harsh environment applications. Each series has a flex cable connector, in-line flex cable connector and bulkhead panel mounting options - overmolded cable versions are also available for certain series.
With a wide choice of ruggedized plugs and receptacles offering 2 to 32 poles, popular power ratings including 250V, 277V up to 600V 32A and screw, solder or crimp terminations and metal or plastic connector housings, the Buccaneer power connector range provides the ideal interconnect solution to many design problems.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
DG Sub-Miniature Switch
• Extremely small dimensions – only 12.8 x 5.8 x 6.5 mm
• Breaking capacity ranges from small switching currents and voltages to low-voltage applications up to 3 A 125 VAC
• Available with or without auxiliary actuator
• Use on circuit boards with connections to the left or right and standing
• Operating temperature -25 to +85 °C
• High mechanical operating life > 1,000.000 operations (model dependant)
• Degree of protection IP40
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
FMBC EP 3-Phase Mains Filter
• Compact design with minimal footprint
• Double-stage filter with high attenuation
• Variants for high voltage applications
• Wide temperature range
Schurter introduces the FMBC EP double-stage filter family for 3 phase systems. Thanks to its particularly compact dimensions and high performance, the new filter series is ideally suited for the tight space conditions in today's machine and industrial plant construction. Due to versions with high nominal voltages, a particularly wide field of applications is possible.
Space is scarce in control cabinets for industrial applications in the 3-phase range. Schhurter has addressed this problem with another complete filter redesign, which is much more compact than previous generations. The new, almost cuboidal design makes optimum use of the space in the housing. Thanks to a double-stage filter and the use of the highest quality components (generously dimensioned film capacitors, chokes with highly permeable cores), the new development shines with exceptional broadband filter attenuation.
Suitable for High EMC Emissions
The double-stage filter family is therefore also appropriate for applications with particularly high EMC emissions, as is frequently encountered in industry. Typical applications include machines and systems for automatic production, motor drives and industrial plant machinery. These powerful filters are also the first choice for modern frequency inverters for motor control.
Mounting
The FMBC EP series features screw terminals for absolutely safe wiring. Thanks to the metal flange, an excellent earth connection is ensured when screwed to the chassis.
Wide Temperature and Voltage Range
The standard types can be used over a wide temperature range from -40 °C to 100 °C. The filters are designed for currents from 16 A to 230 A at an ambient temperature of 50 °C. They have both ENEC and cURus approval and are recommended for applications up to 520 VAC or even 760 VAC.
Leakage Current
The standard versions are designed for industrial applications with leakage currents <4 mA. Special variants with leakage currents <1 mA are available for leakage current critical applications.
Applications
• Industrial equipment, machines
• Robotics
•Motor drive applications
•Machine tools
• Energy inverters
The completely redesigned FMBC EP models are the ideal replacement for all types of Schurter FMBC and FMBC NEO filters. They offer identical performance with significantly reduced dimensions and weight.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Sensata is pleased to announce the Cynergy3 FSU Series Flow Detection Switch.
FSU Series switches have industry standard process connection sizes (push fit or NPT thread) that give a quick and reliable method of installation. The FSU Series of pre-set switches uses a reliable and robust reed switch design for operation. This family is NSF-61 certified and therefore meets the stringent requirements for the control of equipment that comes in contact with potable water.
These flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The switches are supplied with a standard wire length and flow rate set points, but can be customized to suit customer needs.
Why the FSU?
Wherever there is a need to detect the flow of fluid there may be a requirement for a flow switch. To list all areas where this is applicable to the FSU is prohibitive. However the FSU will be used as either a process
control device or system protection device. The FSU is compact, reliable and has very little pressure drop across the switch due to its design, and more cost effective compared to its competitors.
Typical examples of usage are, heater element protection, pump run dry protection, server room cooling flow failure detection or industrial or domestic water supply leak detection.
Applications:
- Circulation pump protection
- Leak detection
- Flow sensing
- Mains water control
- Dispensing Equipment
- Cooling system for electronic equipment (Laser Heads, Welding machine, X-Ray Tubes, Semiconductor Equipment)
- Processing Equipment, Water Purifications and Filtering, Distilling
- Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics
Features:
• NSF-61 approved
• Power ratings 25 VA
• Wide connection range
• Fast switching, allowing precise control
• Compact in-line design
• High life expectancy
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
CFO Fuse Clip Series: As THT Version or with M3 Bore for Screw and Rivet Mounting
• Designed for high rated voltages
• Excellent price-performance ratio
• Low mounting height
The CFO fuse clip series is designed for fuses with 10.3 mm diameter and is available as M3 version for screw and rivet mounting or alternatively for THT.
High performance
The new CFO fuse clip series is suitable for applications with voltages up to 1000 VDC / 600 VAC and currents up to 16 A (UL). The operating range extends from -40 ºC to 125 ºC.
Economical
All variants of the CFO fuse clip series offer an excellent price-performance ratio. The clips are made of brass and are available with nickel or tin plating.
Flexible
Suitable for (almost) every application: Whether a classic THT or screw/rivet mounting is required, with the CFO series you will find your matching fuse clip. Also, thanks to their low mounting height, they can
be installed anywhere.
Applications
Due to its high voltage rating, the CFO fuse clips are suitable for a particularly wide range of applications: These include for example photovoltaic and DC high voltage applications in general. Furthermore, the CFO series is of course also suitable for classical industrial and consumer electronics, battery chargers and power distribution applications.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2025.
UK distributor of electrical and electronic components.
