BLDC motors are the best solution when your application requires accurate control of speed, torque and position.
Crouzet SMi series are an all-in-one solution, with an integrated electronic drive, a high-precision encoder and a brake, providing all the functions of traditional servomotors. plus programming capabilities and vast flexibility thanks to our DCMind Soft.
Crouzet DC Brushless Hall Effect Series are well known for their outstanding durability.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The Bulgin Rectangular Connector range offers a reliable, rugged solution for cable to cable applications in harsh environments with its environmentally sealed range of products. The series has a male and female option, as well as modifications including enhanced seal retention, protective end caps, shrink boot adapters, welded flange, terminating resistors and a Y-Type connector for industrial and automotive industries.
Key Features:
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The PLHT miniature circuit breaker is a protective device equipped with both a thermal and an electromagnetic release that is available in 1-, 2-, 3-, 4- and 3+N pole versions. The PLHT is compatible with AC and DC applications up to 60 V with rated currents from 20 A to 125 A and is available with tripping characteristics B, C and D. It has a switching capacity of up to 25 kA.
The PLHT-V is a special 1-pole version of the PLHT miniature circuit breaker for installation in front of the meter in commercial applications. The PLHT-V is compatible with AC and DC applications up to 60 V with rated currents from 20 A to 63 A and is available with a tripping characteristic that is similar to type D. This special version has a switching capacity of up to 25 kA.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Ideally suited to protect against overcurrent and short circuit of printed circuit boards, semi-conductors and telecommunications equipment.
Circuit breakers with magnetic or hydraulic-magnetic trip mechanism respond extremely fast and provide genuine physical contact isolation. Magnetic trip ensures disconnection of the faulty circuit nearly without delay in the event of short circuit, but also in the event of low overloads. Our models also provide hydraulically delayed switching characteristic required for certain applications.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The 4799 rewireable IEC connector from Schurter is the first of its kind: it combines a rewireable C19 connector with the proven V-Lock cord retention system.
Fast reaction time is an important factor in opening a new market for a device. Rewirable connectors are particularly flexible and especially suitable for small series of mains cables to enable exactly this. These connectors give you the freedom to choose the right cable with a country-specific plug.
Applications for a Safe Connection (V-Lock)
With electrical appliances that are moved or vibrate during operation, there is a risk of the power cable being unintentionally pulled out of the appliance, resulting in a power failure. Therefore, cord retention systems such as the one on the 4799 are a cost-effective solution to a potentially expensive problem. Cord retention systems are typically required for applications in the field of medical analysis, diagnostic or laboratory equipment, portable instruments, professional audio/video applications or equipment in the food industry.
Halogen-Free Design
Type 4799 from Schurter does not use halogens for the bushing or any other plastic components.
Approvals and Certifications
The 4799 connector has all approvals for the European, Chinese and North American markets. It is certified in accordance with the IEC/UL/CCC 60320 standard.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Thanks to its specific design and technical characteristics, the new Finder 68 Series power relay achieves the switching of exceptionally high loads, making it perfect in the context of energy production and distribution and in particular for the world’s demand for green sustainable mobility (EV-charging).
It can be used in charging stations up to 55 kW, in the production of inverters, battery chargers, emergency power generators, as well as in many other renewable energy applications.
It can also be installed in uninterruptible power supplies (UPS), in pump control panels and inside automation control panels such as for the control of heavy-duty elevators.
Suitable for mounting and connecting via a printed circuit board, thanks to its 2 NO 100 A rated contacts, the Type 68.22 can achieve the full switching of a three-phase + neutral load up to 100 A by utilizing JUST 2 relays in tandem – saving considerable PCB real estate in comparison to earlier technologies.
The 68 Series power relay was designed through a careful analysis of the specific areas of application and demands of the market, combined with Finder’s know-how in the design and construction of relays.
The new 68 Series is totally MADE IN ITALY and boasts low coil consumption, a holding power of only 0.7 W, compact size and a modern design – the result of collaboration with the Milanese design studio Fossati | Minelli.
With a distance between open contacts of 3.6 mm it complies with VDE 0126-1-1 and EN 62109-1 standards, as well as meeting the requirements of EN 60335-1 relating to heat and fire resistance (GWIT 775 ° C and GWFI 850 ° C).
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Revos POWER contact inserts and adapter units are designed for currents up to 100A, and are also available in mixed amperage contact versions – perfectly protected within the revos BASIC housing line.
Revos POWER is used in wind power plants, construction machinery, utility vehicles, machine building, control systems, and larger drives.
revos POWER combines power and control contacts in a single connector.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
DKCV-1 Current-Compensated Chokes for Vertical PCB Mounting
Schurter is launching a new, vertically mountable choke family for PCBs with very high inductances. The DKCV-1 current-compensated chokes are designed for currents from 0.5 to 10 A. Thanks to their nanocrystalline cores, the new chokes have very high inductances with particularly compact dimensions.
Powerful applications in the energy sector are becoming increasingly compact. This compact design combined with high energy efficiency leads to an increase in electromagnetic interference in modern electronic devices. Powerful filter elements are required to suppress this interference. Due to the compact dimensions, the integration of the filter elements on printed circuit boards is an ideal solution. The new DKCV-1 choke series is particularly suitable for applications that require high attenuation.
High Performance in a Compact Design
The nanocrystalline cores enable very high currents with extremely compact dimensions. Thanks to the vertical choke arrangement, they also require very little space on the PCB. All variants of the DKCV-1 family have the same footprint on the PCB.
Applications
The new chokes are ideal for demanding applications that require high inductance with compact dimensions. These include switching power supplies, industrial, medical, laboratory and test equipment. The chokes are suitable for currents up to 10 A and voltages up to 300 VAC or 450 VDC and have ENEC,
cUR and UR approvals. For higher power applications, the DKIV-1 series of chokes is available with rated currents up to 50A.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
When it comes to choosing the right terminal block for your application, there are literally hundreds of different options to choose from and it can be an overwhelming experience. Here at Hylec, we have a team of specialists who are equipped to help you make the right decision for your application.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Sensata | Crydom DRA3P Series is a family of DIN Rail mount 3-phase Solid State Contactors with resistive ratings of 2.4 and 4.2 Amps per channel at 48-510 VAC, and motor ratings of 1 and 2 HP at 480 VAC. All the DRA3P series models are C-UL-US recognized.
The DRA3P three phase solid state contactor are available in 2 configurations, with 2 or 3 controlled legs for added flexibility. In the case of the version with 2 controlled legs, the third leg is linked internally.
Features:
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2025.
UK distributor of electrical and electronic components.
