Finder supply a complete range of surge protection to help protect your expensive control panels:

• Surge arrester suitable for 230/400 V system applications to prevent over-voltage effects caused by direct for indirect lightning strikes

• SPD Type 1+2

• Replacement spark gap and varistor modules (for single phase systems)

• Visual and remote signalling of varistor status

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

UL Approved*  D Size Form C (Changeover) Relay

•  100W switching power.
•  Changeover contacts.
•  PCB Mount.
•  Available with or without a magnetic screen.
•  Tungsten contacts for high power switching.
•  Large package size.
•  Up to 4A carry current.
•  Often used in applications which require circuit protection or circuit breakers.

The D1 series is a reed relay with changeover contacts which are often used in safety critical applications.

The switching is achieved through the use of high vacuum reed switches with Tungsten contacts and make these relays suitable for high reliability applications, such as test equipment and high voltage power supplies.

These are PCB mount relays, though custom options may be available on request.

*Consult factory for UL ratings:
These products have been UL approved for use as per pollution degree 2 classification.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

UL Approved*   Vertically Mounted Miniature High Voltage Reed Relay

• Space saving package with square footprint.
• Available with or without magnetic screen.
• Ideal for applications where a high packing density is required.
• Up to 350V switching voltage
• 2.5A carry current
• Isolation Voltage across contacts - 3kV

The S4 series is a vertically mounted miniature high voltage reed relay for applications where space saving is a prime consideration.

*Consult factory for UL ratings:
These products have been UL approved for use as per pollution degree 2 classification.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The first 5 pole screwless in line junction box on the market with 5 approved 32A lever connectors; supplied with all components for completely tool-free faster installation

Hylec-APL, the specialist supplier of electrical components and enclosures, has announced the launch of Debox SL2, a completely tool-free in-line junction box which comes complete with five approved lever connectors. Debox SL2 is the smallest junction box with five poles on the market and the only product supplied complete with 5 screw free terminals: each individual 32A lever connector can take up to three conductors. Debox SL2 saves professional electrical contractors valuable time and makes installation easier for smaller and larger internal wiring jobs, as everything needed is supplied with the box and there is no need to use a screwdriver to securely join wires. Thanks to its design, Debox SL2 ends the frustration of dropping tiny screws on the floor, which then have to be retrieved, or not having required components on hand.

A first to the market from Hylec, Debox SL2 is a registered design and suitable for joining either flat or round profile cable with a minimum conductor size of 0.5mm and a maximum of 2.5mm. It is simple to use - after inserting cables and closing the levers, the lid of the box is simply snapped shut and secured with the butterfly clip supplied. To enable the Debox SL2 to be re-opened requires a tool, which complies with current regulations.

Safety is always paramount for electrical components and the Debox range, including the new Debox SL2, is flame retardant to UL940V 0 and conforms to the EN60598-1 (13.2.2) Glow Wire Test. Debox SL2 measures a compact 116mm x 45mm x 33mm and is manufactured from white polypropylene. With a temperature rating of -20degC to +85degC, it is maintenance free and suitable for all internal applications.

Debox SL2 joins the other highly successful Debox in-line junction box products, Debox SL and Debox S. Debox SL, which has four lever connectors, was the first 100% tool less / screwless in line junction box available on the UK market and has since sold in the millions of units.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

White Paper Download Link:
https://www.schurter.com/data/download/3522344

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

S Size Form C (Changeover) Reed Relay

• Compact footprint.
• Changeover contacts.
• PCB Mount.
• Available with or without magnetic screen.
• Up to 3W switching power.
• Up to 1.2A carry current.
• Small package size with compact footprint.
• Rhodium contacts for low contact resistance and high durability.
• Often used in applications which require circuit protection or circuit breakers.

The S3 series is a compact reed relay with changeover contacts which are often used for safety critical applications.

Low contact resistance, through the use of Rhodium contact reed switches, makes the S series suitable for many high voltage applications at DC and low frequency, where performance and reliability are paramount.

These are PCB mount relays, though custom options may be available on request.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/