Thermal circuit breakers (circuit protectors, resettable fuses, circuit breakers for equipment protection) are ideally suited to overload protection of motors, transformers, magnetic valves, on-board electrical systems and low voltage lines.
The trip time of thermal circuit breakers depends on the height and of the duration of the overload current and the ambient temperature. With higher current ratings, the bimetal or hot wire is heated up until the defined trip time is reached and the device ensures genuine physical isolation of the contacts.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
With revos IT, cable assemblies can be fed into a closed housing sealed and with strain relief.
D-Sub connectors are available in a range from 9-pole to 100-pole connectors. revos IT thus protects data transmission between control units, measurement cables, and encoder cables.
The revos IT data cable entry gland allows pre-assembled cables to be fed through control cabinet walls without any problem. The cables are strain-relieved and sealed through the entry gland, creating a secure connection. A total of up to 4 cables can be fed through. Unused feedthroughs are closed with rubber seals.
In addition, revos IT also brings numerous benefits for you as the user as there is no need to assemble connectors on-site and the manufacturer warranty for the pre-assembled cables remains intact. revos IT is also easy to handle, requiring no special tools.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The new MSMII Indicator Elements, Crafted From High-Quality Stainless Steel:
After the successful introduction of the MSM II Switch family, Schurter now introduce the MSM II indicator elements, made from high-quality stainless steel. This unveiling represents a marriage of aesthetics and technology, emphasizing a refined technical approach.
The elegant design and the enormously wide selection of high-quality push-buttons and switches of all kinds form the foundation for the success of the MSM family for decades
Various Illumination Designs
Similar to the new MSM II switch family, the indicator elements are available in various illumination surfaces, including the elegant point illumination, as well as the ring and surface illumination variants. These not only contribute to an appealing visual aesthetic but also provide innovative avenues for visualizing your information.
Diverse Illumination Colors
Across the Entire Color Spectrum: To facilitate immediate information recognition, a multitude of illumination colors covering the entire color spectrum is employed. From classic white to dynamic RGB, all options are available to create the perfect signaling solution.
Power Supplies
Flexibility is a key factor for the success of the MSM II family. The new Metal Line display elements are designed to operate at various voltages (5, 12, 24 VDC, or variable), catering to the most individual requirements.
High Impact Resistance
Robustness combined with elegance – that's what the Metal Line from Schurter represents. The MSM II indicator elements are not just a visual highlight; they also impress with an impressive high impact resistance according to IK08 standards. This equips them perfectly to withstand the challenges of rigorous usage for many years.
Installtion Depth
All products within the MSM II family are available in two different installation depths, providing the developer with the necessary flexibility to choose the optimal solution for devices with varying installation requirements.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The Hylec Control Station range comes in a variety of colours and functions.
The Control Stations are housed in high impact resistant, flame retardant ABS to UL94-HB. We can also supply a wide range of switches, pilot lamps and other accessories to supply customised products. Please ask for details.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The DRC3P Series is a family of DIN Rail Mount, IEC standard based Solid State Contactors with a proprietary thermal management technology, which allows them to switch on and off 3-phase loads of up to 7.6 Amps per phase at 600 VAC in a compact 45mm wide package.The DRC3P Series Solid State Contactors are particularly suited for demanding applications where you need to control (start/stop) 3-phase motors of up to 5HP at 480 VAC. They offer the highest switching frequency in the market (up to 9000 cycles per hour), making them the ideal solution for replacement of electromechanical contactors in applications that require high reliability and/or frequent switching.
The DRC3P Series models are available in 2 configurations (with 2 or 3 controlled legs) and they are available with optional embedded auxiliary contacts for additional functionality in your control circuits.
Features:
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The Chemical Processing Industry offers specific challenges for sensor design and development as the environment in which the sensor is used may be corrosive. There may be specific requirements for materials that can be used and measures that need to be taken to ensure accurate, durable performance.
Our sensors are used in a variety of environments where chemical exposure is necessary including provision of Level Sensors and Float Switches for industrial inkjet printing, and numerous Level and Flow Sensor applications to measure movement and storage of chemical liquids during industrial processing.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Johnson Electric offers a wide range of power pump subsystems, utilizing various motor technology platforms. Our synchronous, high voltage DC, and EC pumps are engineered for high power, low noise, and long-life performance.
We provide customized applications engineering to adapt and enhance performance based on unique design requirements. With the acquisition of Stackpole International, our automotive pump portfolio now includes engine and transmission pump technologies, complementing our market leadership in fuel and washer pump applications.
Additionally, we deliver durable and reliable valves and cartridges for combi boilers and metering applications, ensuring safety through vertical integration and our proven production system. Trust Johnson Electric for innovative solutions across industrial sectors.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The PBX-R is a robust and reliable positive-action microswitch for low and medium power ranges and the harshest environments. Equipped with self-cleaning V-shaped contacts, incredibly durable and robust, the PBX-R offers numerous advantages.
Approved by leading international railway organizations and meeting the most stringent standards, the PBX-R is an ideal choice for a wide range of applications in the rolling stock such as master controller, emergency break and circuit breaker, and for the railway infrastructure like the switchgear, automatic barrier, earth switch and more.
The PBX-R also offers numerous advantages for engineering and design departments wishing to use it on a project:
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The SPPVR family of surge protection devices (SPDs) is our answer to the growing need for safe and reliable photovoltaic (PV) installations in residential and commercial buildings.
Powerful protection is the first step to ensuring a long lifetime for your equipment and inverters: these SPDs ensure that your system will not be damaged by any overvoltage event on the direct current (DC) side of your PV application.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2024.
UK distributor of electrical and electronic components.
